No sound after Amiupdate(Solved)

AmigaOne X1000 platform specific issues.
Post Reply
User avatar
electric-magic
Posts: 36
Joined: Sat Jul 28, 2012 8:04 am
Location: Paphos, Cyprus
Contact:

No sound after Amiupdate(Solved)

Post by electric-magic »

Hello,
I did an amiupdate and downloaded the new HDaudio driver.
I rebooted but now I have no sound.
Do I need to alter any settings?

Thanks.
Last edited by electric-magic on Thu Jul 18, 2013 3:10 pm, edited 1 time in total.
Ax1000/A4000 040 D/A1200 030
User avatar
ddni
Posts: 230
Joined: Fri Dec 02, 2011 11:06 pm

Re: No sound after Amiupdate

Post by ddni »

Just in case, have you moved your speaker cable from Soundcard to onboard audio jack?
User avatar
LyleHaze
AmigaOS Core Developer
AmigaOS Core Developer
Posts: 521
Joined: Sat Jun 18, 2011 4:06 pm
Location: North Florida, near the Big Bend

Re: No sound after Amiupdate

Post by LyleHaze »

Make sure your lead is moved to the green jack on the NEMO board.
Open AHIPrefs and change ALL 5 UNITS over to an HDAudio mode.
Move the volume slider to full right.(If you are upgrading from 6.12 this is VERY LIKELY to be the problem)
Set the output to "All"
Save

Then try it again!

:)
User avatar
electric-magic
Posts: 36
Joined: Sat Jul 28, 2012 8:04 am
Location: Paphos, Cyprus
Contact:

Re: No sound after Amiupdate

Post by electric-magic »

Thanks Lyle.
Working now, had all the settings correct except units 0 to 3 were not at full volume.

Thanks again.
Ax1000/A4000 040 D/A1200 030
User avatar
ddni
Posts: 230
Joined: Fri Dec 02, 2011 11:06 pm

Re: No sound after Amiupdate(Solved)

Post by ddni »

Having a similar issue to the OP.

Followed Lyle's advice about ahiprefs. Play a test sound works, but no sound from AmigaAmp etc?
Any ideas?

Edit.
Leaving the machine alone for 30 mins whilst I grabbed a coffee seems to have fixed it. All good now :?: . Those Amiga elves are quick :)
Post Reply