Kernel 4.3

[xeno74]

Works too with my Radeon HD R7-250X

Thank you very much for testing.

[xeno74]

Hi All,

Today I released the alpha6.

New:

Linux git log

It also includes:

The alpha6 kernel for P.A. Semi Electra and Chitra boards

Download: vmlinux-4.3-alpha6-AMIGA_one_X1000.tar.bz2



Cheers,

Christian

[xeno74]

New Nemo patch for the alpha7:

nemo_4.3-5.patch.zip

(16.97 KiB) Downloaded 611 times

[xeno74]

Hi All,

I released the alpha7 for our motherboards with P.A. Semi PA6T-1682M microprocessors for testing. Linus Torvalds added a lot of source code last night.

New: Linux git log

Download: vmlinux-4.3-alpha7-AMIGA_one_X1000.tar.bz2

Further information about motherboards with P.A. Semi PA6T-1682M microprocessors:

• Electra: First development/eval board. Funky USB on localbus, plenty
  of PCI-e. Two GigE, one 10GigE XAUI. CompactFlash and IDE on localbus
  too. Usually shipped with a PCI-e SATA card and a USB card.
• Chitra: Second edition dev/eval board. Moved SATA and USB on-board,
  and removed some of the localbus hardware. Might have routed three
  GigE out instead of 2.
• Athena: Never released board with a smaller package chip, there's
  only a few of these around. It's similar to Chitra, and the silicon is the same.
• Nemo: Released as AmigaONE X1000. With co-processor: "Xena" 500 MHz XCore XS1-L2 124 SDS
  and SB600 southbridge.

Cheers,

Christian

[xeno74]

Hi All,

Here is the last alpha. Next week I'll release the first release candidate.

New: Linux git log

Download: vmlinux-4.3-alpha8-AMIGA_one_X1000.tar.bz2

Further information:

AMD Radeon R600 Gallium3D Performance Over The Past Two Years - phoronix

Note: The best results we have, are on Fedora 17 PPC64 with Mesa 8.0.4.



MATE PowerPC with the alpha8 of kernel 4.3. For a retrospective future.



PLEASE test the alpha8.

Thanks in advance,

Christian

[xeno74]

Today I successfully released the RC1 of kernel 4.3.

New:

- Wacom Intuos/Graphire tablet support (USB)

- Announcement by Linus Torvalds

Further information:

Linux 4.3-rc1 Kernel Released - phoronix

The Linux 4.3 Kernel Is Bringing Many New Features & Improvements, But No KDBUS - phoronix

[xeno74]

Download kernel 4.3 rc1: vmlinux-4.3-rc1-AMIGA_one_X1000.tar.bz2

[AlicePPC]

For more info how configure the cintiq 13HD
http://ragnarb.com/configuring-wacom-ci ... ntu-14-04/

[xeno74]

PLEASE PLEASE PLEASE PLEASE test the RC1. AlicePPC has problems with the RC1 so I'd like to know if you have problems either.

[xeno74]

On the filesystem side, the bulk of the changes (in lines of code) is the removal of the ext3 filesystem (with ext4 remaining to support ext3 layouts - but the separate ext3 codebase is gone).

I can confirm, that the ext4 driver works with my openSUSE 11.1 ext3 partition.



PLEASE test the RC1.