New kernels

[sailorMH]

Strange. It works here. Does the final kernel 7.2.0 work for you?

7.2 works, only no network
( I have still PCI RTL card on my X1000, but cable is connected to motherboard PA-Semi NIC)

P..S. log via email

[sailorMH]

alpha7 of kernel 7.4 also not works:

Code: Select all

[  OK  ] Mounted dev-hugepages.mount - Huge Pages File Ssystemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
ystem.
[  OK  ] Mounted dev-mqueue.mountт€І- POSIX Message Queue systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
File System.
[  OK  ] Mounted ystemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
1;39msys-kernel-debug.mт€Іnt - Kernel Debug systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
File System.
[  OK  ] Mounted sys-kernel-tracingт€Іnt - Kernel Trace File System.
[  OK  ] Finished keyboard-setupsystemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
.seт€І- Set the console keyboard layout.
[  OK  ] Finished kmod-static-nodesт€Іreate List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[  OK  ] Finished modprobe@configfsт€І[0m - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[  OK  ] Finished modprobe@dm_mod.sт€Іe - Load Kernel Module dm_mod.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[  OK  ] Finished modprobe@drm.service - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[  OK  ] Finished modprobe@efi_pstoт€Іm - Load Kernel Module efi_pstore.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[  OK  ] Finished modprobe@fuse.service - Load Kernel Module fuse.
systemd[1]: Started systemd-journald.service - Journal Service.
[  OK  ] Started systemd-journald.service - Journal Service.
[  OK  ] Finished modprobe@loop.service - Load Kernel Module loop.
[  OK  ] Finished systemd-fsck-rootт€І File System Check on Root Device.
[  OK  ] Finished systemd-modules-lт€Іservice - Load Kernel Modules.
         Mounting sys-fs-fuse-conneт€І - FUSE Control File System...
         Mounting sys-kernel-configт€Іernel Configuration File System...
[  OK  ] Started systemd-fsckd.servт€Іtem Check Daemon to report status.
         Starting systemd-remount-fт€Іnt Root and Kernel File Systems...
         Starting systemd-sysctl.seт€Іce - Apply Kernel Variables...
[  OK  ] Mounted sys-fs-fuse-connecт€Іnt - FUSE Control File System.
[  OK  ] Mounted sys-kernel-config.т€І Kernel Configuration File System.
[  OK  ] Finished systemd-udev-trigт€Іe - Coldplug All udev Devices.
         Starting ifupdown-pre.servт€Іynchronize boot up for ifupdown...
[  OK  ] Finished systemd-sysctl.service - Apply Kernel Variables.
[  OK  ] Finished ifupdown-pre.servт€І synchronize boot up for ifupdown.
EXT4-fs (sdb5): re-mounted 3c82f6db-6ca0-4e5a-8f5a-cc7ccd3dcb93 r/w.
[  OK  ] Finished systemd-remount-fт€Іount Root and Kernel File Systems.
         Starting systemd-journal-fт€Іh Journal to Persistent Storage...
         Starting systemd-random-seт€Іice - Load/Save Random Seed...
         Starting systemd-sysusers.т€Іrvice - Create System Users...
systemd-journald[1419]: Received client request to flush runtime journal.
[  OK  ] Finished ernel panic - not syncing: stack-protector: Kernel stack is corrupted in: srcu_gp_start_if_needed+0x534/0x538
Rebooting in 180 seconds..

this is tail, full log also will send email

[xeno74]

alpha7 of kernel 7.4 also not works:

My X1000 doesn't have this issue. The alpha7 boots up, restarts and shuts down. The P.A. Semi onboard ethernet works.

But ... Pulseaudio can't enable sound devices anymore on Void PPC. The output via ALSA works. Tested with the onboard HDA ATI SB sound device, Soundblaster LIVE Player 1024 PCI card, AMD HDMI audio and with USB audio. Strangely enough Pulseaudio can enable the sound devices on MintPPC32. I think the latest sound updates are responsible for the issue on Void PPC.

7.2 works, only no network
( I have still PCI RTL card on my X1000, but cable is connected to motherboard PA-Semi NIC)

P..S. log via email

From your log:

Code: Select all

enp0s20f3: Could not attach to phy
pasemi_mac 0000:00:14.3: PHY init failed: -19.
pasemi_mac 0000:00:14.3: Defaulting to 1Gbit full duplex

PHY init failed. I don’t know why. It works on my X1000. Have you overclocked your X1000?

alpha6 of kernel 7.2 works fine on X1000


P.S. Mirari I will test later - now rebuilding it from testbed to new case and make new installations of OSes...

But the P.A. Semi onboard ethernet works with the alpha6 of kernel 7.2 on your X1000. Could you please test the alpha6 again?

@All

Does sound work with the alpha7 of kernel 7.4 on your machines (X1000, X5000 and Mirari)?

[xeno74]

For bisecting: Sound.git

[sailorMH]

From your log:

Code: Select all

enp0s20f3: Could not attach to phy
pasemi_mac 0000:00:14.3: PHY init failed: -19.
pasemi_mac 0000:00:14.3: Defaulting to 1Gbit full duplex

PHY init failed. I don’t know why. It works on my X1000. Have you overclocked your X1000?

Yes, I am runnig 2 GHz all time. It can be connected with it, but kernel v6.x has no problems with 2GHz.

alpha6 of kernel 7.2 works fine on X1000

But the P.A. Semi onboard ethernet works with the alpha6 of kernel 7.2 on your X1000. Could you please test the alpha6 again?

Tested again 7.2-alpha 6 with PA-Semi NIC connected:

Link is down. If you need, I have saved log and dmesg.

Tested again 7.2-alpha 6, but hese time with PCI RTL NIC connected:

It worked OOTB.

So there are probably some problem with PA-Sami NIC. I will try on weekend to remove RTL, if something changes.

[xeno74]

So there are probably some problem with PA-Sami NIC. I will try on weekend to remove RTL, if something changes.

Could you also please test the stable long-term kernel 6.12.112? Does the P.A. Semi onboard ethernet work with the stable long-term kernel 6.12.112?

[xeno74]

Could you also please test the stable long-term kernel 6.12.112? Does the P.A. Semi onboard ethernet work with the stable long-term kernel 6.12.112?

Sailor,

Please post the dmesg of your test with the kernel 6.12.112 here or via email.

Thanks for your help,
Christian

[Hypex]

I had an issue with the 7.4 alpha 3. Mine would not boot up on my X1000 and I got an error similar to what sailorMM had. It just booted to a kernel panic. In any case I'll move along since that's an "old" alpha now.

[sailorMH]

My X1000 also has PASemi NIC problem with 6.12.112 kernel:

Code: Select all

NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[  OK  ] Started polkit.service - Authorization Manager.
[  OK  ] Started wpa_supplicant.service - WPA supplicant.
         Starting ModemManager.service - Modem Manager...
[  OK  ] Started accounts-daemon.service - Accounts Service.
[  OK  ] Started connman.service - Connection service.
         Starting connman-wait-onliт€Іork to be configured by ConnMan...
[  OK  ] Started NetworkManager.service - Network Manager.
[  OK  ] Reached target network.target - Network.
         Starting NetworkManager-waт€Іm - Network Manager Wait Online...
         Starting cups.service - CUPS Scheduler...
         Starting ssh.service - OpenBSD Secure Shell server...
         Starting systemd-user-sessт€Іvice - Permit User Sessions...
         Starting systemd-hostnamed.service - Hostname Service...
[  OK  ] Finished systemd-user-sessт€Іervice - Permit User Sessions.
         Starting lightdm.service - Light Display Manager...
         Starting plymouth-quit-waiт€І until boot process finishes up...
[  OK  ] Started ModemManager.service - Modem Manager.
[  OK  ] Started systemd-hostnamed.service - Hostname Service.
enp0s20f3: Could not attach to phy
pasemi_mac 0000:00:14.3: PHY init failed: -19.
pasemi_mac 0000:00:14.3: Defaulting to 1Gbit full duplex
RTL8211C Gigabit Ethernet r8169-0-630:00: attached PHY driver (mii_bus:phy_addr=r8169-0-630:00, irq=MAC)
r8169 0000:06:06.0 enp6s6: Link is Down

Whole serial log + dmesg via email..

[sailorMH]

Normally I run my X1000 on 2 GHz. Now I tested kernels 6.12.112 and 7.4.alpha7 again on frequency 1.8 GHz:

PA-Semi NIC worked with 6.12.112 and nor works with 7.4.alpha7. But at least no crash.
It is a little strange behaviour.