New kernels

Skateman · Post by **Skateman** » Sun Apr 05, 2026 5:00 pm

Yeah all fine... busy with Mirari and MorphOS at the moment .. (besides a busy dayjob)

PS .. we need to look at this i think... https://t2linux.com/
(And Berlin stuff.. so close to you )

Dave

xeno74 · Post by **xeno74** » Mon Apr 06, 2026 5:57 pm

Hi All,

I released the RC7 of kernel 7.0 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs) today.

Download and further information: github.com

Built using an LXC container on a PROXMOX server 9.1.7:

Cheers,
Christian

sailorMH · Post by **sailorMH** » Tue Apr 07, 2026 5:42 pm

On Mirari 7.0 - RC7 worked fine

xeno74 · Post by **xeno74** » Tue Apr 07, 2026 8:34 pm

sailorMH wrote: Tue Apr 07, 2026 5:42 pm On Mirari 7.0 - RC7 worked fine

Good to know that it works on the Mirari.

Thank you

xeno74 · Post by **xeno74** » Sun Apr 12, 2026 5:56 pm

Skateman wrote: Sat Sep 27, 2025 8:57 pm Stable kernel 6.12 up and running on the Mirari board

Big picture https://www.skateman.nl/wp-content/uplo ... -44-45.png

Hi Skateman,

Does the NVMe device work without any problems with the kernel 6.12?

Thanks,
Christian

sailorMH · Post by **sailorMH** » Sun Apr 12, 2026 7:00 pm

Hi,
I have problems with 6.x kernels - not see NVME drive. With 7.0 it is OK.
Tested with: 6.12.76, 6.12.80, 6.16 - NVME not visible; 7.0-rc7 - NVME is OK

There is serial logs + dmesg for Void/Fienix and 7.0-rc7/6.12.80:
https://upload.nolog.cz/download/d3aed5 ... -xX7QyyTDg
P.S. Link will be valid one week.
Please let me know what output is needed.

sailorMH · Post by **sailorMH** » Sun Apr 12, 2026 7:16 pm

Void 6.12.80:

Code: Select all

uname -a
Linux void-live 6.12.80-powerpc64-smp #1 SMP Sat Apr  4 14:19:27 UTC 2026 ppc64 GNU/Linux

lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda           8:0    0 238.5G  0 disk 
├─sda1        8:1    0    24G  0 part 
├─sda2        8:2    0  50.9G  0 part 
└─sda3        8:3    0  10.9G  0 part 
sdb           8:16   0 119.2G  0 disk 
├─sdb1        8:17   0    22G  0 part /
└─sdb2        8:18   0  22.1G  0 part 
sdc           8:32   1   3.8G  0 disk 
└─sdc1        8:33   1   3.8G  0 part /run/media/amigaone/KERNEL
mmcblk0     179:0    0  29.7G  0 disk 
└─mmcblk0p1 179:1    0     4G  0 part /run/media/amigaone/48A7-5E99
zram0       253:0    0     0B  0 disk 

blkid
/dev/sdb2: LABEL="FIENIX" UUID="d737fd37-e386-48b0-98eb-b291696ff3d4" BLOCK_SIZE="4096" TYPE="ext4"
/dev/sdb1: LABEL="void-live" UUID="93cb7dd2-ce1b-4bf5-ba47-818cf8e8c9f4" BLOCK_SIZE="4096" TYPE="ext4"
/dev/mmcblk0p1: SEC_TYPE="msdos" UUID="48A7-5E99" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="8514387f-01"
/dev/sdc1: SEC_TYPE="msdos" LABEL_FATBOOT="MH" LABEL="KERNEL" UUID="9B7A-F1F0" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="e7015807-01"

Void 7.0-rc7:

Code: Select all

uname -a
Linux void-live 7.0.0-rc7-powerpc64-smp #1 SMP Mon Apr  6 06:28:48 UTC 2026 ppc64 GNU/Linux

lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda           8:0    0 238.5G  0 disk 
├─sda1        8:1    0    24G  0 part 
├─sda2        8:2    0  50.9G  0 part 
└─sda3        8:3    0  10.9G  0 part 
sdb           8:16   0 119.2G  0 disk 
├─sdb1        8:17   0    22G  0 part /
└─sdb2        8:18   0  22.1G  0 part 
sdc           8:32   1   3.8G  0 disk 
└─sdc1        8:33   1   3.8G  0 part /run/media/amigaone/KERNEL
mmcblk0     179:0    0  29.7G  0 disk 
└─mmcblk0p1 179:1    0     4G  0 part /run/media/amigaone/48A7-5E99
zram0       253:0    0     0B  0 disk 
nvme0n1     259:0    0 119.2G  0 disk 
└─nvme0n1p1 259:1    0  10.1G  0 part 

blkid
/dev/sdb2: LABEL="FIENIX" UUID="d737fd37-e386-48b0-98eb-b291696ff3d4" BLOCK_SIZE="4096" TYPE="ext4"
/dev/sdb1: LABEL="void-live" UUID="93cb7dd2-ce1b-4bf5-ba47-818cf8e8c9f4" BLOCK_SIZE="4096" TYPE="ext4"
/dev/mmcblk0p1: SEC_TYPE="msdos" UUID="48A7-5E99" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="8514387f-01"
/dev/sdc1: SEC_TYPE="msdos" LABEL_FATBOOT="MH" LABEL="KERNEL" UUID="9B7A-F1F0" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="e7015807-01"

sda .. MorphOS partitions
sdc .. USB

xeno74 · Post by **xeno74** » Sun Apr 12, 2026 7:40 pm

SailorMH,

Could you please test the kernel 6.12.48?

Thanks,
Christian

sailorMH · Post by **sailorMH** » Sun Apr 12, 2026 8:27 pm

kernel 6.12.48 - also no NVME:

Code: Select all

uname -a
Linux void-live 6.12.48-powerpc64-smp #1 SMP PREEMPT Tue Sep 23 10:17:43 CEST 2025 ppc64 GNU/Linux

lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda           8:0    0 238.5G  0 disk 
├─sda1        8:1    0    24G  0 part 
├─sda2        8:2    0  50.9G  0 part 
└─sda3        8:3    0  10.9G  0 part 
sdb           8:16   0 119.2G  0 disk 
├─sdb1        8:17   0    22G  0 part /
└─sdb2        8:18   0  22.1G  0 part 
sdc           8:32   1   3.8G  0 disk 
└─sdc1        8:33   1   3.8G  0 part /run/media/amigaone/KERNEL
mmcblk0     179:0    0  29.7G  0 disk 
└─mmcblk0p1 179:1    0     4G  0 part /run/media/amigaone/48A7-5E99
zram0       253:0    0     0B  0 disk 

blkid
/dev/sdb2: LABEL="FIENIX" UUID="d737fd37-e386-48b0-98eb-b291696ff3d4" BLOCK_SIZE="4096" TYPE="ext4"
/dev/sdb1: LABEL="void-live" UUID="93cb7dd2-ce1b-4bf5-ba47-818cf8e8c9f4" BLOCK_SIZE="4096" TYPE="ext4"
/dev/mmcblk0p1: SEC_TYPE="msdos" UUID="48A7-5E99" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="8514387f-01"
/dev/sdc1: SEC_TYPE="msdos" LABEL_FATBOOT="KERNEL" LABEL="KERNEL" UUID="9B7A-F1F0" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="e7015807-01"

serial log:

Code: Select all

5 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
SATA0: (3 Gbps)
SATA1: (3 Gbps)
Device 0: Vendor: 0x1ed0 Rev: APF1M3R1 Prod: P300HHBB241008009451
            Type: Hard Disk
            Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
Press SPACE for menu or ESC U-Boot Shell
Booting in:     5  4  4  4  4  4  4  4  4  4  4  4  4  4  4  4 OF: reserved mem: 0x00000001ff000000..0x00000001ffffffff (16384 KiB) map non-reusable bman-fbpr
OF: reserved mem: 0x00000001fec00000..0x00000001feffffff (4096 KiB) map non-reusable qman-fqd
OF: reserved mem: 0x00000001fc000000..0x00000001fdffffff (32768 KiB) map non-reusable qman-pfdr
Activating Kernel Userspace Execution Prevention
MMU: Supported page sizes
         4 KB as direct
      4096 KB as direct
     16384 KB as direct
     65536 KB as direct
    262144 KB as direct
   1048576 KB as direct
MMU: Book3E HW tablewalk not supported
Linux version 6.12.48-powerpc64-smp (geeko@buildhost) (powerpc64-suse-linux-gcc (SUSE Linux) 11.5.0, GNU ld (GNU Binutils; devel:gcc / SLE-15) 2.43.1.20240828-150300.536) #1 SMP PREEMPT Tue Sep 23 10:17:43 CEST 2025
Hardware name: Mirari e5500 0x80241021 CoreNet Generic
printk: legacy bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
-----------------------------------------------------
phys_mem_size     = 0x200000000
dcache_bsize      = 0x40
icache_bsize      = 0x40
cpu_features      = 0x0000000300800394
  possible        = 0x0000000300900394
  always          = 0x0000000300800394
cpu_user_features = 0xcc008000 0x08000000
mmu_features      = 0x000a0010
firmware_features = 0x0000000000000000
-----------------------------------------------------
ioremap() called early from .of_iomap+0x50/0x80. Use early_ioremap() instead
CoreNet Generic board
barrier-nospec: using isync; sync as speculation barrier
Zone ranges:
  DMA      [mem 0x0000000000000000-0x000000007fffffff]
  Normal   [mem 0x0000000080000000-0x00000001ffffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
MMU: Allocated 2112 bytes of context maps for 255 contexts
percpu: Embedded 19 pages/cpu s40336 r0 d37488 u262144
Kernel command line: root=/dev/sdb1 rootdelay=5
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Built 1 zonelists, mobility grouping on.  Total pages: 2097152
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: area num 4.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 4 CPUs
mpic: ISU size: 512, shift: 9, mask: 1ff
mpic: Initializing for 512 sources
rcu: srcu_init: Setting srcu_struct sizes based on contention.
clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns
clocksource: timebase mult[1aaaaaab] shift[24] registered
Console: colour dummy device 80x25
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
e500 family performance monitor hardware support registered
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 400.
Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 4 CPUs
Memory: 8111348K/8388608K available (12828K kernel code, 1092K rwdata, 10736K rodata, 464K init, 671K bss, 273292K reserved, 0K cma-reserved)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Machine: Mirari
SoC family: QorIQ T1040
SoC ID: svr:0x85200211, Revision: 1.1
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor ladder
cpuidle: using governor menu
Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->255
PCI host bridge /pcie@ffe240000  ranges:
 MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 
  IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
/pcie@ffe240000: PCICSRBAR @ 0xdf000000
setup_pci_atmu: end of DRAM 200000000
/pcie@ffe240000: Setup 64-bit PCI DMA window
/pcie@ffe240000: DMA window size is 0xdf000000
Found FSL PCI host bridge at 0x0000000ffe250000. Firmware bus number: 0->255
PCI host bridge /pcie@ffe250000  ranges:
 MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 
  IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
/pcie@ffe250000: PCICSRBAR @ 0xdf000000
setup_pci_atmu: end of DRAM 200000000
/pcie@ffe250000: Setup 64-bit PCI DMA window
/pcie@ffe250000: DMA window size is 0xdf000000
Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->255
PCI host bridge /pcie@ffe260000  ranges:
 MEM 0x0000000c40000000..0x0000000c5fffffff -> 0x00000000e0000000 
  IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000
/pcie@ffe260000: PCICSRBAR @ 0xdf000000
setup_pci_atmu: end of DRAM 200000000
/pcie@ffe260000: Setup 64-bit PCI DMA window
/pcie@ffe260000: DMA window size is 0xdf000000
software IO TLB: mapped [mem 0x0000000003ff5000-0x0000000007ff5000] (64MB)
Freescale Elo series DMA driver
fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
fsl-elo-dma ffe100300.dma: #4 (fsl,eloplus-dma-channel), irq 76
fsl-elo-dma ffe100300.dma: #5 (fsl,eloplus-dma-channel), irq 77
fsl-elo-dma ffe100300.dma: #6 (fsl,eloplus-dma-channel), irq 78
fsl-elo-dma ffe100300.dma: #7 (fsl,eloplus-dma-channel), irq 79
fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
fsl-elo-dma ffe101300.dma: #4 (fsl,eloplus-dma-channel), irq 80
fsl-elo-dma ffe101300.dma: #5 (fsl,eloplus-dma-channel), irq 81
fsl-elo-dma ffe101300.dma: #6 (fsl,eloplus-dma-channel), irq 82
fsl-elo-dma ffe101300.dma: #7 (fsl,eloplus-dma-channel), irq 83
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
NET: Registered PF_ATMPVC protocol family
NET: Registered PF_ATMSVC protocol family
PCI: Probing PCI hardware
fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0xc000180000010000-0xc00018000001ffff] (bus address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
pci 0000:00:00.0: [1957:0825] type 01 class 0x060400 PCIe Root Port
pci 0000:00:00.0: BAR 0 [mem 0xdf000000-0xdfffffff]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0xc000180000011000-0xc000180000011fff]
pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc100fffff]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: [1002:7244] type 00 class 0x030000 PCIe Endpoint
pci 0000:01:00.0: BAR 0 [mem 0xc00000000-0xc0fffffff 64bit pref]
pci 0000:01:00.0: BAR 2 [mem 0xc10000000-0xc1000ffff 64bit]
pci 0000:01:00.0: BAR 4 [io  0xc000180000011000-0xc0001800000110ff]
pci 0000:01:00.0: ROM [mem 0xc10020000-0xc1003ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
pci 0000:01:00.1: [1002:7264] type 00 class 0x038000 PCIe Endpoint
pci 0000:01:00.1: BAR 0 [mem 0xc10040000-0xc1004ffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
fsl-pci ffe250000.pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io  0xc000180000030000-0xc00018000003ffff] (bus address [0x0000-0xffff])
pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
pci 0001:00:00.0: [1957:0825] type 01 class 0x060400 PCIe Root Port
pci 0001:00:00.0: BAR 0 [mem 0xdf000000-0xdfffffff]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: supports D1 D2
pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
fsl-pci ffe260000.pcie: PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [io  0xc000180000050000-0xc00018000005ffff] (bus address [0x0000-0xffff])
pci_bus 0002:00: root bus resource [mem 0xc40000000-0xc5fffffff] (bus address [0xe0000000-0xffffffff])
pci_bus 0002:00: root bus resource [bus 00-ff]
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
pci 0002:00:00.0: [1957:0825] type 01 class 0x060400 PCIe Root Port
pci 0002:00:00.0: BAR 0 [mem 0xdf000000-0xdfffffff]
pci 0002:00:00.0: PCI bridge to [bus 01-05]
pci 0002:00:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:00:00.0: supports D1 D2
pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:01:00.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Upstream Port
pci 0002:01:00.0: PCI bridge to [bus 02-05]
pci 0002:01:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:01:00.0: supports D1 D2
pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:00:00.0: PCI bridge to [bus 01-ff]
pci 0002:02:01.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0002:02:01.0: PCI bridge to [bus 03]
pci 0002:02:01.0: supports D1 D2
pci 0002:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:02:02.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0002:02:02.0: PCI bridge to [bus 04]
pci 0002:02:02.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:02:02.0: supports D1 D2
pci 0002:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:02:03.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Downstream Port
pci 0002:02:03.0: PCI bridge to [bus 05]
pci 0002:02:03.0: supports D1 D2
pci 0002:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:01:00.0: PCI bridge to [bus 02-ff]
pci 0002:02:01.0: PCI bridge to [bus 03-ff]
pci_bus 0002:03: busn_res: [bus 03-ff] end is updated to 03
pci 0002:04:00.0: [1ed0:2283] type 00 class 0x010802 PCIe Endpoint
pci 0002:04:00.0: BAR 0 [mem 0xc40000000-0xc40003fff 64bit]
pci 0002:04:00.0: ROM [mem 0xc40010000-0xc4001ffff pref]
pci 0002:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit]
pci 0002:04:00.0: VF BAR 0 [mem 0x00000000-0x0003ffff 64bit]: contains BAR 0 for 16 VFs
pci 0002:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
pci 0002:02:02.0: PCI bridge to [bus 04-ff]
pci_bus 0002:04: busn_res: [bus 04-ff] end is updated to 05
pci 0002:02:03.0: PCI bridge to [bus 06-ff]
pci_bus 0002:06: busn_res: [bus 06-ff] end is updated to 06
pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 06
pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 06
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 06
PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
PCI: Cannot allocate resource region 0 of device 0002:00:00.0, will remap
pci 0000:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
pci 0000:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0xc000180000010000-0xc00018000001ffff]
pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [io  0xc000180000010000-0xc00018000001ffff]
pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
pci_bus 0000:01: resource 0 [io  0xc000180000010000-0xc00018000001ffff]
pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
pci 0001:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
pci 0001:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0:   bridge window [io  0xc000180000030000-0xc00018000003ffff]
pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc3fffffff]
pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0001:00: resource 4 [io  0xc000180000030000-0xc00018000003ffff]
pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff]
pci_bus 0001:01: resource 0 [io  0xc000180000030000-0xc00018000003ffff]
pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff]
pci_bus 0002:00: max bus depth: 3 pci_try_num: 4
pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
pci 0002:02:01.0: PCI bridge to [bus 03]
pci 0002:04:00.0: VF BAR 0 [mem 0xc40020000-0xc4005ffff 64bit]: assigned
pci 0002:02:02.0: PCI bridge to [bus 04-05]
pci 0002:02:02.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:02:03.0: PCI bridge to [bus 06]
pci 0002:01:00.0: PCI bridge to [bus 02-06]
pci 0002:01:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:00:00.0: PCI bridge to [bus 01-06]
pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
pci 0002:00:00.0:   bridge window [mem 0xc40000000-0xc5fffffff]
pci_bus 0002:00: No. 2 try to assign unassigned res
pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
pci 0002:02:01.0: PCI bridge to [bus 03]
pci 0002:02:02.0: PCI bridge to [bus 04-05]
pci 0002:02:02.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:02:03.0: PCI bridge to [bus 06]
pci 0002:01:00.0: PCI bridge to [bus 02-06]
pci 0002:01:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
pci 0002:00:00.0: PCI bridge to [bus 01-06]
pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
pci 0002:00:00.0:   bridge window [mem 0xc40000000-0xc5fffffff]
pci_bus 0002:00: No. 3 try to assign unassigned res
pci 0002:02:02.0: resource 14 [mem 0xc40000000-0xc400fffff] released
pci 0002:02:02.0: PCI bridge to [bus 04-05]
pci 0002:01:00.0: resource 14 [mem 0xc40000000-0xc400fffff] released
pci 0002:01:00.0: PCI bridge to [bus 02-06]
pci 0002:00:00.0: resource 14 [mem 0xc40000000-0xc5fffffff] released
pci 0002:00:00.0: PCI bridge to [bus 01-06]
pci 0002:00:00.0: BAR 0 [mem 0xc40000000-0xc40ffffff]: assigned
pci 0002:00:00.0: bridge window [mem size 0x20000000]: can't assign; no space
pci 0002:00:00.0: bridge window [mem size 0x20000000]: failed to assign
pci 0002:01:00.0: bridge window [mem size 0x00100000]: can't assign; no space
pci 0002:01:00.0: bridge window [mem size 0x00100000]: failed to assign
pci 0002:02:02.0: bridge window [mem size 0x00100000]: can't assign; no space
pci 0002:02:02.0: bridge window [mem size 0x00100000]: failed to assign
pci 0002:02:01.0: PCI bridge to [bus 03]
pci 0002:04:00.0: ROM [mem size 0x00010000 pref]: can't assign; no space
pci 0002:04:00.0: ROM [mem size 0x00010000 pref]: failed to assign
pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: can't assign; no space
pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: failed to assign
pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: can't assign; no space
pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: failed to assign
pci 0002:02:02.0: PCI bridge to [bus 04-05]
pci 0002:02:03.0: PCI bridge to [bus 06]
pci 0002:01:00.0: PCI bridge to [bus 02-06]
pci 0002:00:00.0: PCI bridge to [bus 01-06]
pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
pci_bus 0002:00: No. 4 try to assign unassigned res
pci 0002:00:00.0: bridge window [mem size 0x20000000]: can't assign; no space
pci 0002:00:00.0: bridge window [mem size 0x20000000]: failed to assign
pci 0002:00:00.0: bridge window [mem size 0x20000000]: can't assign; no space
pci 0002:00:00.0: bridge window [mem size 0x20000000]: failed to assign
pci 0002:01:00.0: bridge window [mem size 0x00100000]: can't assign; no space
pci 0002:01:00.0: bridge window [mem size 0x00100000]: failed to assign
pci 0002:01:00.0: bridge window [mem size 0x00100000]: can't assign; no space
pci 0002:01:00.0: bridge window [mem size 0x00100000]: failed to assign
pci 0002:02:02.0: bridge window [mem size 0x00100000]: can't assign; no space
pci 0002:02:02.0: bridge window [mem size 0x00100000]: failed to assign
pci 0002:02:02.0: bridge window [mem size 0x00100000]: can't assign; no space
pci 0002:02:02.0: bridge window [mem size 0x00100000]: failed to assign
pci 0002:02:01.0: PCI bridge to [bus 03]
pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: can't assign; no space
pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: failed to assign
pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: can't assign; no space
pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: failed to assign
pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: can't assign; no space
pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: failed to assign
pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: can't assign; no space
pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: failed to assign
pci 0002:02:02.0: PCI bridge to [bus 04-05]
pci 0002:02:03.0: PCI bridge to [bus 06]
pci 0002:01:00.0: PCI bridge to [bus 02-06]
pci 0002:00:00.0: PCI bridge to [bus 01-06]
pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
pci_bus 0002:00: Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off
pci_bus 0002:00: resource 4 [io  0xc000180000050000-0xc00018000005ffff]
pci_bus 0002:00: resource 5 [mem 0xc40000000-0xc5fffffff]
pci_bus 0002:01: resource 0 [io  0xc000180000050000-0xc00018000005ffff]
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
clocksource: Switched to clocksource timebase
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
netfs: FS-Cache loaded
CacheFiles: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
PCI: CLS 32 bytes, default 64
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.41)
SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, fatal assert, debug enabled
9p: Installing v9fs 9p2000 file system support
NET: Registered PF_ALG protocol family
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
io scheduler kyber registered
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 556880 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 112972 bytes in 278640 nsec
crc32_combine: 8373 self tests passed
crc32c_combine: 8373 self tests passed
ledtrig-cpu: registered to indicate activity on CPUs
pcieport 0000:00:00.0: PME: Signaling with IRQ 20
pcieport 0000:00:00.0: AER: enabled with IRQ 20
pcieport 0001:00:00.0: PME: Signaling with IRQ 21
pcieport 0001:00:00.0: AER: enabled with IRQ 21
pcieport 0002:00:00.0: PME: Signaling with IRQ 22
pcieport 0002:00:00.0: AER: enabled with IRQ 22
bman_portal ff4000000.bman-portal: Portal initialised, cpu 0
bman_portal ff4004000.bman-portal: Portal initialised, cpu 1
bman_portal ff4008000.bman-portal: Portal initialised, cpu 2
bman_portal ff400c000.bman-portal: Portal initialised, cpu 3
qman_portal ff6000000.qman-portal: Portal initialised, cpu 0
qman_portal ff6004000.qman-portal: Portal initialised, cpu 1
qman_portal ff6008000.qman-portal: Portal initialised, cpu 2
qman_portal ff600c000.qman-portal: Portal initialised, cpu 3
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
printk: legacy console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 18750000) is a 16550A
printk: legacy console [ttyS0] enabled
printk: legacy console [ttyS0] enabled
printk: legacy bootconsole [udbg0] disabled
printk: legacy bootconsole [udbg0] disabled
serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 18750000) is a 16550A
serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 18750000) is a 16550A
serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 18750000) is a 16550A
ePAPR hypervisor byte channel driver
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (R580 0x1002:0x7244 0x1002:0x0B12 0x00).
radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
ATOM BIOS: X1950XT
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 256bits DDR
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Possible lm63 thermal controller at 0x18
[drm] radeon: power management initialized
[drm] radeon: 4 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] Loading R500 Microcode
[drm] radeon: ring at 0x0000000010001000
[drm] ring test succeeded in 2 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I-1
[drm]   HPD2
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP3: INTERNAL_LVTM1
[drm] Connector 1:
[drm]   SVIDEO-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm]   DVI-I-2
[drm]   HPD1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[drm] Initialized radeon 2.50.0 for 0000:01:00.0 on minor 0
[drm] fb mappable at 0xC000C0000
[drm] vram apper at 0xC00000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
brd: module loaded
loop: module loaded
zram: Added device: zram0
mpt3sas version 48.100.00.00 loaded
fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
scsi host0: sata_fsl
ata1: SATA max UDMA/133 irq 68 lpm-pol 0
fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
ata1: Signature Update detected @ 0 msecs
scsi host1: sata_fsl
ata2: SATA max UDMA/133 irq 69 lpm-pol 0
fsl_dpaa_mac ffe4e6000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e6000) failed
fsl_dpaa_mac ffe4e6000.ethernet: FMan MEMAC
fsl_dpaa_mac ffe4e6000.ethernet: Using random MAC address: 52:b2:7a:00:92:eb
fsl_dpaa_mac ffe4e6000.ethernet eth0: Probed interface eth0
e1000: Intel(R) PRO/1000 Network Driver
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered PF_PPPOX protocol family
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Freescale On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 6.12.48-powerpc64-smp ehci_hcd
usb usb1: SerialNumber: fsl-ehci.0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-11: Patriot P210 256GB, HDFEF3.3, max UDMA/133
hub 1-0:1.0: USB hub found
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 16/32)
hub 1-0:1.0: 1 port detected
ata1.00: configured for UDMA/133
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
scsi 0:0:0:0: Direct-Access     ATA      Patriot P210 256 F3.3 PQ: 0 ANSI: 5
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Freescale On-Chip EHCI Host Controller
usb usb2: Manufacturer: Linux 6.12.48-powerpc64-smp ehci_hcd
usb usb2: SerialNumber: fsl-ehci.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
 sda: RDSK (512) sda1 (SFS^@)(res 2 spb 1) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^@)(res 2 spb 1)
usbcore: registered new interface driver usb-storage
sd 0:0:0:0: [sda] Attached SCSI disk
mousedev: PS/2 mouse device common for all mice
i2c_dev: i2c /dev entries driver
mpc-i2c ffe118000.i2c: timeout 1000000 us
rtc-ds1307 5-0068: registered as rtc0
rtc-ds1307 5-0068: setting system clock to 2026-04-12T18:09:22 UTC (1776017362)
mpc-i2c ffe118100.i2c: timeout 1000000 us
mpc-i2c ffe119000.i2c: timeout 1000000 us
mpc-i2c ffe119100.i2c: timeout 1000000 us
i2c i2c-6: Added multiplexed i2c bus 9
i2c i2c-6: Added multiplexed i2c bus 10
i2c i2c-6: Added multiplexed i2c bus 11
i2c i2c-6: Added multiplexed i2c bus 12
pca954x 6-0077: registered 4 multiplexed busses for I2C switch pca9546
ptp_qoriq: device tree node missing required elements, try automatic configuration
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Freescale hypervisor management driver
fsl-hv: no hypervisor found
mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA 64-bit
ipip: IPv4 and MPLS over IPv4 tunneling driver
IPv4 over IPsec tunneling driver
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered PF_PACKET protocol family
NET: Registered PF_KEY protocol family
lec:lane_module_init: lec.c: initialized
mpoa:atm_mpoa_init: mpc.c: initialized
l2tp_core: L2TP core driver, V2.0
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SP32G 29.7 GiB
DCCP: Activated CCID 2 (TCP-like)
 mmcblk0: p1
DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
DCCP is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list
sctp: Hash tables configured (bind 256/256)
NET: Registered PF_RDS protocol family
Registered RDS/tcp transport
tipc: Activated (version 2.0.0)
ata2: Signature Update detected @ 502 msecs
NET: Registered PF_TIPC protocol family
tipc: Started in single node mode
usb 2-1: new high-speed USB device number 2 using fsl-ehci
9pnet: Installing 9P2000 support
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
clk: Disabling unused clocks
ALSA device list:
  #0: Virtual MIDI Card 1
Waiting 5 sec before mounting rot device...
usb 2-1: New USB device found, dVendor=0424, iProduct=2517, bdDevice= 0.02
usb 2-1: New USB device strings Mfr=0, Product0, SerialNumber0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 7 ports detected
ata2: SATA link up 3.0 Gbps (SSatus 123 SContrl 300)
ata2.00: ATA-10: TS128GSSD230S,R0427GN1, max UMA/133
ata2.00: 250069680 sectors, muli 16: LBA48 NCQ(depth 16/32)
ata2.00: ATA Identify Device Lo not supportedata2.00: configured for UDMA/13
scsi 1:0:0:0: Direct-Access    ATA      TS128GSD230S    7GN1 Q: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generc sg1 type 0
sd 1:0:0:0: [sdb] 250069680 512byte logical blcks: (128 GB/11 GiB)
sd 1:0:0:0: [sdb] Write Protectis off
sd 1:0:0:0: [sdb] Write cache: nabled, read cahe: enabled, dosn't support DP or FUA
sd 1:0:0:0: [sdb] Preferred minmum I/O size 51 bytes
 sdb: RDSK (512) sdb1 ((res 2 sb 1) sdb2 ((res2 spb 1)
sd 1:0:0:0: [sdb] Attached SCSIdisk
usb 2-1.1: new low-speed USB deice number 3 usng fsl-ehci
usb 2-1.1: New USB device found idVendor=04d9,idProduct=1503,bcdDevice= 4.03
usb 2-1.1: New USB device strins: Mfr=1, Produt=2, SerialNumbr=0
usb 2-1.1: Product: USB Keyboar
usb 2-1.1: Manufacturer:  
input:   USB Keyboard as /devics/platform/ffe00000.soc/ffe21100.usb/fsl-ehci1/usb2/2-1/2-1./2-1.1:1.0/000304D9:1503.0001/nput/input0
hid-generic 0003:04D9:1503.0001 input,hidraw0:USB HID v1.10 Kyboard [  USB Kyboard] on usb-sl-ehci.1-1.1/iput0
input:   USB Keyboard System Cotrol as /device/platform/ffe00000.soc/ffe21100.usb/fsl-ehci./usb2/2-1/2-1.12-1.1:1.1/0003:4D9:1503.0002/iput/input1
input:   USB Keboard Consumer ontrol as /devies/platform/ffe00000.soc/ffe21000.usb/fsl-ehc.1/usb2/2-1/2-11/2-1.1:1.1/000:04D9:1503.0002input/input2
hid-generic 0003:04D9:1503.0002 input,hidraw1:USB HID v1.10 Dvice [  USB Keyoard] on usb-fs-ehci.1-1.1/inpt1
usb 2-1.2: new high-speed USB dvice number 4 uing fsl-ehci
usb 2-1.2: New SB device found idVendor=4146,idProduct=ba65,bcdDevice= 1.00
usb 2-1.2: New USB device strins: Mfr=1, Produt=2, SerialNumbr=3
usb 2-1.2: Product: USB Mass Strage Device
usb 2-1.2: Manufacturer: PRETECUG-04GB
usb 2-1.2: SerialNumber: e4d3973f1e74c
usb-storage 2-1.2:1.0: USB MassStorage device etected
scsi host2: usb-storage 2-1.2:10
usb 2-1.3: new low-speed USB deice number 5 usng fsl-ehci
usb 2-1.3: New USB device found idVendor=093a,idProduct=2521,bcdDevice= 1.00
usb 2-1.3: New USB device strins: Mfr=0, Produt=2, SerialNumbr=0
usb 2-1.3: Product: USB OPTICALMOUSE
input: USB OPTICAL MOUSE as /deices/platform/fe000000.soc/ffe11000.usb/fsl-eci.1/usb2/2-1/21.3/2-1.3:1.0/003:093A:2521.003/input/input3hid-generic 0003:093A:2521.0003 input,hidraw2:USB HID v1.11 Muse [USB OPTICA MOUSE] on usb-sl-ehci.1-1.3/iput0
scsi 2:0:0:0: Direct-Access    Pretec   UltimaGuard     6.00 Q: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generc sg2 type 0
sd 2:0:0:0: [sdc] 7892040 512-bte logical blocs: (4.04 GB/3.7 GiB)
sd 2:0:0:0: [sdc] Write Protectis off
sd 2:0:0:0: [sdc] Asking for cahe data failedsd 2:0:0:0: [sdc] Assuming driv cache: write trough
 sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSIremovable diskEXT4-fs (sdb1): mounted filesysem 93cb7dd2-ce1-4bf5-ba47-818c8e8c9f4 ro withordered data moe. Quota mode: one.
VFS: Mounted root (ext4 filesysem) readonly ondevice 8:17.
devtmpfs: mounted
Freeing unused kernel image (intmem) memory: 44K
This architecture does not havekernel memory potection.
Run /sbin/init as init process- runit: $Id: 25da3b86f7bed40388a039d2f8e8c9bbf0822b $: bootig.
- runit: ener stage: /etc/unit/1
=> Welcome to Void!
ounting psedo-filesystems..
raid6: int64x8  gen()   773 MB/
raid6: int64x4  gen()   914 MB/
raid6: int64x2 gen()  1417 MB/
raid6: int64x1  gen()  1012 MB/
raid6: using algorithm int64x2 en() 1417 MB/sraid6: .... xor() 720 MB/s, rmwenabled
raid6: using intx1 recovery algrithm
xor: measuring software checksu speed
   8regs           :  3567 MB/sc
   8regs_prefetch  :  2912 MB/sc
   32regs          :  3706 MB/sc
   32regs_prefetch :  2841 MB/sc
xor: using function: 32regs (376 MB/sec)
Btrfs loaded, zoned=no, fsverit=no
tun: Universal TUN/TAP device diver, 1.6
device-mapper: ioctl: 4.48.0-iotl (2023-03-01)initialised: dmdevel@lists.linx.dev
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH prtocol family
Bluetooth: HCI device and connetion manager intialized
Bluetooth: HCI socket layer iniialized
Bluetooth: L2CAP socket layer iitialized
Bluetooth: SCO socket layer iniialized
=> Loading kernel modules..

=> Starting udev and waitin for devices tosettle...
udevd[1863]: starting version 32.11
random: crng init done
udevd[1865]: starting eudev-3.211
hwmon hwmon0: temp1_input not atached to any termal zone
hwmon hwmon0: temp2_input not atached to any termal zone
=> Remounting rootfs read-oly...
EXT4-fs (sdb1): re-mounted 93cbdd2-ce1b-4bf5-b47-818cf8e8c9f4
=> Activating dmraid device...
no raid disks
=> Activatig btrfs devices..
Scanning for Btrfs filesystems=> Activating encrypted devces...
=> Checking filesystems:
=> Mounting rootfs read-wrie...
EXT4-fs (sdb1): re-mounted 93cbdd2-ce1b-4bf5-b47-818cf8e8c9f4r/w.
=> Mounting all non-networkfilesystems...
=> Initializing swap...=> Seeding random number geerator...
Seeding 256 bits and creditingSaving 256 bitsof creditable sed for next boo
=> Settin up loopback inerface...
=> Setting up hostname to 'oid-live'...
=> Loadingsysctl(8) settigs...
kernel.dmesg_restrict = 1
kernl.kexec_load_diabled = 1
syscl: cannot stat proc/sys/kernelyama/ptrace_scoe: No such fileor directory
krnel.core_uses_id = 1
fs.protcted_hardlinks  1
fs.protecte_symlinks = 1
kernel.kptr_restict = 1
kernelperf_event_paraoid = 2
sysctl cannot stat /poc/sys/kernel/uprivileged_bpf_isabled: No suc file or directry
=> Initialization complete,running stage 2..
- runit:leave stage: /ec/runit/1
- ruit: enter stage /etc/runit/2
runsvchdir: defult: current.
udevd[3456]: starting version 32.11
udevd[3456]: starting eudev-3.211
Bluetooth: BNEP (Ethernet Emulaion) ver 1.3
Bluetooth: BNEP filters: protocl multicast
Bluetooth: BNEP socket layer intialized
elogind-daemon[3505]: New seat eat0.
elogind-daemon[3505]: Watching ystem buttons o /dev/input/evet0 (  USB Keybord)
elogind-daemon[3505]: Watching ystem buttons o /dev/input/evet1 (  USB Keybord System Contrl)
fsl_dpaa_mac ffe4e6000.etherneteth0: PHY [0x000000ffe4fc000:0] driver [RTL821F Gigabit Ethenet] (irq=POLL)
fsl_dpaa_mac ffe4e6000.etherneteth0: configurig for phy/rgmiiid link mode
elogind-daemon[3505]: New sessin c1 of user lihtdm.
fsl_dpaa_mac ffe4e6000.etherneteth0: Link is U - 1Gbps/Full -flow control rxtx
elogind-daemon[3505]: Removed sssion c1.
elogind-daemon[3505]: New sessin c2 of user amgaone.
FAT-fs (sdc1): Volume was not poperly unmounte. Some data maybe corrupt. Plese run fsck.
12 Apr 18:09:55 ntpdate[4087]: djust time servr 141.144.241.1 offset -0.35614 sec
12 Apr 18:10:02 ntpdate[4116]: djust time servr 90.187.112.13 offset -0.35449 sec
12 Apr 18:10:08 ntpdate[4127]: djust time servr 141.144.241.1 offset -0.34466 sec
12 Apr 18:10:15 ntpdate[4129]: djust time servr 90.187.112.13 offset -0.34631 sec
12 Apr 18:10:22 ntpdate[4130]: djust time servr 90.187.112.13 offset -0.34480 sec
12 Apr 18:10:29 ntpdate[4160]: djust time servr 141.144.241.1 offset -0.33713 sec
12 Apr 18:10:35 ntpdate[4165]: djust time servr 90.187.112.13 offset -0.33814 sec
12 Apr 18:10:42 ntpdate[4168]: djust time servr 90.187.112.13 offset -0.33165 sec
12 Apr 18:10:50 ntpdate[4169]: djust time servr 141.144.241.1 offset -0.33186 sec
12 Apr 18:10:57 ntpdate[4170]: djust time servr 90.187.112.13 offset -0.32390 sec
12 Apr 18:11:04 ntpdate[4171]: djust time servr 141.144.241.1 offset -0.32122 sec
12 Apr 18:11:11 ntpdate[4172]: djust time servr 141.144.241.1 offset -0.31299 sec
12 Apr 18:11:17 ntpdate[4173]: djust time servr 141.144.241.1 offset -0.31397 sec
12 Apr 18:11:24 ntpdate[4177]: djust time servr 90.187.112.13 offset -0.31213 sec
12 Apr 18:11:31 ntpdate[4216]: djust time servr 178.215.228.2 offset -0.30645 sec
12 Apr 18:11:38 ntpdate[4259]: djust time servr 116.203.96.22 offset -0.30651 sec
12 Apr 18:11:44 ntpdate[4260]: djust time servr 178.215.228.2 offset -0.30210 sec
12 Apr 18:11:51 ntpdate[4261]: djust time servr 116.202.118.22 offset -0.29816 sec
12 Apr 18:11:58 ntpdate[4264]: djust time servr 116.202.118.22 offset -0.29679 sec
12 Apr 18:12:05 ntpdate[4311]: djust time servr 116.203.96.22 offset -0.29327 sec
12 Apr 18:12:11 ntpdate[4312]: djust time servr 178.215.228.2 offset -0.28597 sec
12 Apr 18:12:18 ntpdate[4313]: djust time servr 116.202.118.22 offset -0.28463 sec
12 Apr 18:12:25 ntpdate[4314]: djust time servr 116.203.96.22 offset -0.28114 sec
12 Apr 18:12:32 ntpdate[4315]: djust time servr 116.203.96.22 offset -0.28190 sec
12 Apr 18:12:38 ntpdate[4318]: djust time servr 116.202.118.22 offset -0.27505 sec
12 Apr 18:12:45 ntpdate[4321]: djust time servr 116.202.118.22 offset -0.27470 sec
12 Apr 18:12:52 ntpdate[4322]: djust time servr 116.203.96.22 offset -0.26861 sec
12 Apr 18:12:59 ntpdate[4325]: djust time servr 116.203.96.22 offset -0.26460 sec
12 Apr 18:13:06 ntpdate[4333]: djust time servr 116.202.118.22 offset -0.26172 sec
12 Apr 18:13:12 ntpdate[4373]: djust time servr 116.202.118.22 offset -0.25971 sec
12 Apr 18:13:19 ntpdate[4374]: djust time servr 116.202.118.22 offset -0.25727 sec
elogind-daemon[3505]: System ispowering down..
elogind-daemon[3505]: Removed sssion c2.
- runit: leave stage: /etc/runi/2
- runit: ener stage: /etc/unit/3

= Waiting for sevices to stop..
ok: down: /var/service/NetworkMnager: 1s, normlly up
ok: dow: /var/service/getty-tty1: 1s,normally up
ok down: /var/serice/agetty-tty2 1s, normally u
ok: down: /va/service/agettytty3: 1s, normaly up
ok: down /var/service/aetty-tty4: 1s, ormally up
ok:down: /var/servce/agetty-tty5:1s, normally up
ok: down: /varservice/agetty-ty6: 1s, normaly up
ok: down:/var/service/avhi-daemon: 1s, elogind-daemon[505]: Received ignal 15 [TERM]
ormally up
ok: down: /var/servce/bluetoothd: s, normally upok: down: /var/ervice/cupsd: 1, normally up
k: down: /var/srvice/dbus: 1s,normally up
ok down: /var/serice/lightdm: 1s normally up
o: down: /var/sevice/ntpd: 1s, ormally up
ok:down: /var/servce/sshd: 1s, nomally up
ok: dwn: /var/servic/udevd: 1s, norally up
=>Saving random nmber generator eed...
Seedng 256 bits andcrediting
Savig 256 bits of ceditable seed fr next boot
=> Stopping udv...
=>Sending TERM sinal to processe...
=> Sending KILL signal to pocesses...
=> Unmounting filesystems, isabling swap..
EXT4-fs (sdb1): re-mounted 93cbdd2-ce1b-4bf5-b47-818cf8e8c9f4ro.
=> Remounting rootfs read-oly...
EXT4-fs (sdb1): re-mounted 93cbdd2-ce1b-4bf5-b47-818cf8e8c9f4
=> Deactivating Crypt Volums
- runit: leave ssd 1:0:0:0: [sd] SynchronizingSCSI cache
tage: /etc/runit/3
- runit: sesd 0:0:0:0: [sd] SynchronizingSCSI cache
ding KILL signal to all processs...
- runit: ower off...
reboot: Power off not available System halted nstead
System Halted, OK to turn off pwer

sailorMH · Post by **sailorMH** » Sun Apr 12, 2026 8:27 pm

dmesg:

Code: Select all

[    0.000000] OF: reserved mem: 0x00000001ff000000..0x00000001ffffffff (16384 KiB) map non-reusable bman-fbpr
[    0.000000] OF: reserved mem: 0x00000001fec00000..0x00000001feffffff (4096 KiB) map non-reusable qman-fqd
[    0.000000] OF: reserved mem: 0x00000001fc000000..0x00000001fdffffff (32768 KiB) map non-reusable qman-pfdr
[    0.000000] Activating Kernel Userspace Execution Prevention
[    0.000000] MMU: Supported page sizes
[    0.000000]          4 KB as direct
[    0.000000]       4096 KB as direct
[    0.000000]      16384 KB as direct
[    0.000000]      65536 KB as direct
[    0.000000]     262144 KB as direct
[    0.000000]    1048576 KB as direct
[    0.000000] MMU: Book3E HW tablewalk not supported
[    0.000000] Linux version 6.12.48-powerpc64-smp (geeko@buildhost) (powerpc64-suse-linux-gcc (SUSE Linux) 11.5.0, GNU ld (GNU Binutils; devel:gcc / SLE-15) 2.43.1.20240828-150300.536) #1 SMP PREEMPT Tue Sep 23 10:17:43 CEST 2025
[    0.000000] Hardware name: Mirari e5500 0x80241021 CoreNet Generic
[    0.000000] Found legacy serial port 0 for /soc@ffe000000/serial@11c500
[    0.000000]   mem=ffe11c500, taddr=ffe11c500, irq=0, clk=300000000, speed=0
[    0.000000] Found legacy serial port 1 for /soc@ffe000000/serial@11c600
[    0.000000]   mem=ffe11c600, taddr=ffe11c600, irq=0, clk=300000000, speed=0
[    0.000000] Found legacy serial port 2 for /soc@ffe000000/serial@11d500
[    0.000000]   mem=ffe11d500, taddr=ffe11d500, irq=0, clk=300000000, speed=0
[    0.000000] Found legacy serial port 3 for /soc@ffe000000/serial@11d600
[    0.000000]   mem=ffe11d600, taddr=ffe11d600, irq=0, clk=300000000, speed=0
[    0.000000] printk: legacy bootconsole [udbg0] enabled
[    0.000000] CPU maps initialized for 1 thread per core
[    0.000000]  (thread shift is 0)
[    0.000000] Allocated 1824 bytes for 4 pacas
[    0.000000] -----------------------------------------------------
[    0.000000] phys_mem_size     = 0x200000000
[    0.000000] dcache_bsize      = 0x40
[    0.000000] icache_bsize      = 0x40
[    0.000000] cpu_features      = 0x0000000300800394
[    0.000000]   possible        = 0x0000000300900394
[    0.000000]   always          = 0x0000000300800394
[    0.000000] cpu_user_features = 0xcc008000 0x08000000
[    0.000000] mmu_features      = 0x000a0010
[    0.000000] firmware_features = 0x0000000000000000
[    0.000000] -----------------------------------------------------
[    0.000000] ioremap() called early from .of_iomap+0x50/0x80. Use early_ioremap() instead
[    0.000000] CoreNet Generic board
[    0.000000] barrier-nospec: using isync; sync as speculation barrier
[    0.000000] barrier-nospec: patched 423 locations
[    0.000000] Top of RAM: 0x200000000, Total RAM: 0x200000000
[    0.000000] Memory hole size: 0MB
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000]   Normal   [mem 0x0000000080000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts
[    0.000000] percpu: Embedded 19 pages/cpu s40336 r0 d37488 u262144
[    0.000000] pcpu-alloc: s40336 r0 d37488 u262144 alloc=1*1048576
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Kernel command line: root=/dev/sdb1 rootdelay=5
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2097152
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 4 CPUs
[    0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff
[    0.000000] mpic: Initializing for 512 sources
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] time_init: decrementer frequency = 37.500000 MHz
[    0.000000] time_init: processor frequency   = 1600.000000 MHz
[    0.000002] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x8a60dd6a9, max_idle_ns: 440795204056 ns
[    0.008913] clocksource: timebase mult[1aaaaaab] shift[24] registered
[    0.014052] clockevent: decrementer mult[999999a] shift[32] cpu[0]
[    0.016537] Console: colour dummy device 80x25
[    0.019655] pid_max: default: 32768 minimum: 301
[    0.023027] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.029272] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.037587] e500 family performance monitor hardware support registered
[    0.042993] rcu: Hierarchical SRCU implementation.
[    0.046408] rcu: 	Max phase no-delay instances is 400.
[    0.050430] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.057491] smp: Bringing up secondary CPUs ...
[    0.062612] smp: Brought up 1 node, 4 CPUs
[    0.065765] Memory: 8111348K/8388608K available (12828K kernel code, 1092K rwdata, 10736K rodata, 464K init, 671K bss, 273292K reserved, 0K cma-reserved)
[    0.078564] devtmpfs: initialized
[    0.084727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.093121] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.099849] Machine: Mirari
[    0.101261] SoC family: QorIQ T1040
[    0.103429] SoC ID: svr:0x85200211, Revision: 1.1
[    0.107308] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.112609] thermal_sys: Registered thermal governor 'step_wise'
[    0.112666] cpuidle: using governor ladder
[    0.120087] cpuidle: using governor menu
[    0.132402] Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->255
[    0.139128] PCI host bridge /pcie@ffe240000  ranges:
[    0.142779]  MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 
[    0.148686]   IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000
[    0.154553] /pcie@ffe240000: PCICSRBAR @ 0xdf000000
[    0.158073] setup_pci_atmu: end of DRAM 200000000
[    0.161467] /pcie@ffe240000: Setup 64-bit PCI DMA window
[    0.165461] /pcie@ffe240000: DMA window size is 0xdf000000
[    0.169993] Found FSL PCI host bridge at 0x0000000ffe250000. Firmware bus number: 0->255
[    0.176724] PCI host bridge /pcie@ffe250000  ranges:
[    0.180365]  MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 
[    0.186270]   IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000
[    0.192114] /pcie@ffe250000: PCICSRBAR @ 0xdf000000
[    0.195656] setup_pci_atmu: end of DRAM 200000000
[    0.199051] /pcie@ffe250000: Setup 64-bit PCI DMA window
[    0.203045] /pcie@ffe250000: DMA window size is 0xdf000000
[    0.207572] Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->255
[    0.214288] PCI host bridge /pcie@ffe260000  ranges:
[    0.217940]  MEM 0x0000000c40000000..0x0000000c5fffffff -> 0x00000000e0000000 
[    0.223847]   IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000
[    0.229688] /pcie@ffe260000: PCICSRBAR @ 0xdf000000
[    0.233234] setup_pci_atmu: end of DRAM 200000000
[    0.236628] /pcie@ffe260000: Setup 64-bit PCI DMA window
[    0.240622] /pcie@ffe260000: DMA window size is 0xdf000000
[    0.247924] software IO TLB: mapped [mem 0x0000000003ff5000-0x0000000007ff5000] (64MB)
[    0.255374] Setting up Freescale MSI support
[    0.255994] Setting up Freescale MSI support
[    0.256550] Setting up Freescale MSI support
[    0.258765] Freescale Elo series DMA driver
[    0.261891] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
[    0.267549] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
[    0.273197] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
[    0.278861] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
[    0.284510] fsl-elo-dma ffe100300.dma: #4 (fsl,eloplus-dma-channel), irq 76
[    0.290156] fsl-elo-dma ffe100300.dma: #5 (fsl,eloplus-dma-channel), irq 77
[    0.295804] fsl-elo-dma ffe100300.dma: #6 (fsl,eloplus-dma-channel), irq 78
[    0.301470] fsl-elo-dma ffe100300.dma: #7 (fsl,eloplus-dma-channel), irq 79
[    0.307655] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
[    0.313318] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
[    0.318965] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
[    0.324612] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
[    0.330265] fsl-elo-dma ffe101300.dma: #4 (fsl,eloplus-dma-channel), irq 80
[    0.335924] fsl-elo-dma ffe101300.dma: #5 (fsl,eloplus-dma-channel), irq 81
[    0.341567] fsl-elo-dma ffe101300.dma: #6 (fsl,eloplus-dma-channel), irq 82
[    0.347220] fsl-elo-dma ffe101300.dma: #7 (fsl,eloplus-dma-channel), irq 83
[    0.353999] SCSI subsystem initialized
[    0.356558] libata version 3.00 loaded.
[    0.356755] usbcore: registered new interface driver usbfs
[    0.360907] usbcore: registered new interface driver hub
[    0.364890] usbcore: registered new device driver usb
[    0.368680] pps_core: LinuxPPS API ver. 1 registered
[    0.372273] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.380093] PTP clock support registered
[    0.382725] EDAC MC: Ver: 3.0.0
[    0.385010] Advanced Linux Sound Architecture Driver Initialized.
[    0.390191] NET: Registered PF_ATMPVC protocol family
[    0.393867] NET: Registered PF_ATMSVC protocol family
[    0.397758] PCI: Probing PCI hardware
[    0.400156] fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00
[    0.404961] pci_bus 0000:00: root bus resource [io  0xc000180000010000-0xc00018000001ffff] (bus address [0x0000-0xffff])
[    0.414518] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff])
[    0.423561] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.427731] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    0.433109] pci 0000:00:00.0: [1957:0825] type 01 class 0x060400 PCIe Root Port
[    0.439047] pci 0000:00:00.0: BAR 0 [mem 0xdf000000-0xdfffffff]
[    0.443653] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.447300] pci 0000:00:00.0:   bridge window [io  0xc000180000011000-0xc000180000011fff]
[    0.454165] pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc100fffff]
[    0.459872] pci 0000:00:00.0: supports D1 D2
[    0.462771] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.470331] pci 0000:01:00.0: [1002:7244] type 00 class 0x030000 PCIe Endpoint
[    0.476203] pci 0000:01:00.0: BAR 0 [mem 0xc00000000-0xc0fffffff 64bit pref]
[    0.481924] pci 0000:01:00.0: BAR 2 [mem 0xc10000000-0xc1000ffff 64bit]
[    0.487223] pci 0000:01:00.0: BAR 4 [io  0xc000180000011000-0xc0001800000110ff]
[    0.493227] pci 0000:01:00.0: ROM [mem 0xc10020000-0xc1003ffff pref]
[    0.498266] pci 0000:01:00.0: enabling Extended Tags
[    0.501970] pci 0000:01:00.0: supports D1 D2
[    0.504887] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:00.0 (capable of 32.000 Gb/s with 2.5 GT/s PCIe x16 link)
[    0.518748] pci 0000:01:00.1: [1002:7264] type 00 class 0x038000 PCIe Endpoint
[    0.524607] pci 0000:01:00.1: BAR 0 [mem 0xc10040000-0xc1004ffff 64bit]
[    0.529975] pci 0000:01:00.1: supports D1 D2
[    0.532992] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.541641] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.545543] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.550833] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.556225] fsl-pci ffe250000.pcie: PCI host bridge to bus 0001:00
[    0.561027] pci_bus 0001:00: root bus resource [io  0xc000180000030000-0xc00018000003ffff] (bus address [0x0000-0xffff])
[    0.570585] pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
[    0.579626] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.583801] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[    0.589166] pci 0001:00:00.0: [1957:0825] type 01 class 0x060400 PCIe Root Port
[    0.595108] pci 0001:00:00.0: BAR 0 [mem 0xdf000000-0xdfffffff]
[    0.599715] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.603412] pci 0001:00:00.0: supports D1 D2
[    0.606314] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.613841] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.617707] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.622992] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[    0.628391] fsl-pci ffe260000.pcie: PCI host bridge to bus 0002:00
[    0.633194] pci_bus 0002:00: root bus resource [io  0xc000180000050000-0xc00018000005ffff] (bus address [0x0000-0xffff])
[    0.642755] pci_bus 0002:00: root bus resource [mem 0xc40000000-0xc5fffffff] (bus address [0xe0000000-0xffffffff])
[    0.651792] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.655965] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[    0.661330] pci 0002:00:00.0: [1957:0825] type 01 class 0x060400 PCIe Root Port
[    0.667275] pci 0002:00:00.0: BAR 0 [mem 0xdf000000-0xdfffffff]
[    0.671881] pci 0002:00:00.0: PCI bridge to [bus 01-05]
[    0.675791] pci 0002:00:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    0.681489] pci 0002:00:00.0: supports D1 D2
[    0.684392] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.691887] pci 0002:01:00.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.698808] pci 0002:01:00.0: PCI bridge to [bus 02-05]
[    0.702697] pci 0002:01:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    0.708459] pci 0002:01:00.0: supports D1 D2
[    0.711343] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.716853] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[    0.720939] pci 0002:02:01.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.728029] pci 0002:02:01.0: PCI bridge to [bus 03]
[    0.731777] pci 0002:02:01.0: supports D1 D2
[    0.734661] pci 0002:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.740204] pci 0002:02:02.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.747289] pci 0002:02:02.0: PCI bridge to [bus 04]
[    0.750926] pci 0002:02:02.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    0.756679] pci 0002:02:02.0: supports D1 D2
[    0.759563] pci 0002:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.765093] pci 0002:02:03.0: [12d8:2404] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.772178] pci 0002:02:03.0: PCI bridge to [bus 05]
[    0.775924] pci 0002:02:03.0: supports D1 D2
[    0.778808] pci 0002:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.786033] pci 0002:01:00.0: PCI bridge to [bus 02-ff]
[    0.790093] pci 0002:02:01.0: PCI bridge to [bus 03-ff]
[    0.793960] pci_bus 0002:03: busn_res: [bus 03-ff] end is updated to 03
[    0.799365] pci 0002:04:00.0: [1ed0:2283] type 00 class 0x010802 PCIe Endpoint
[    0.805237] pci 0002:04:00.0: BAR 0 [mem 0xc40000000-0xc40003fff 64bit]
[    0.810557] pci 0002:04:00.0: ROM [mem 0xc40010000-0xc4001ffff pref]
[    0.815717] pci 0002:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    0.821037] pci 0002:04:00.0: VF BAR 0 [mem 0x00000000-0x0003ffff 64bit]: contains BAR 0 for 16 VFs
[    0.828962] pci 0002:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.842754] pci 0002:02:02.0: PCI bridge to [bus 04-ff]
[    0.846617] pci_bus 0002:04: busn_res: [bus 04-ff] end is updated to 05
[    0.852094] pci 0002:02:03.0: PCI bridge to [bus 06-ff]
[    0.855963] pci_bus 0002:06: busn_res: [bus 06-ff] end is updated to 06
[    0.861243] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 06
[    0.866546] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 06
[    0.871861] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 06
[    0.877162] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
[    0.883679] PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
[    0.890191] PCI: Cannot allocate resource region 0 of device 0002:00:00.0, will remap
[    0.896742] PCI 0000:00 Cannot reserve Legacy IO [io  0xc000180000010000-0x10fff]
[    0.896752] PCI 0001:00 Cannot reserve Legacy IO [io  0xc000180000030000-0x30fff]
[    0.896759] PCI 0002:00 Cannot reserve Legacy IO [io  0xc000180000050000-0x50fff]
[    0.896780] pci 0000:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
[    0.902882] pci 0000:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
[    0.908536] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.912184] pci 0000:00:00.0:   bridge window [io  0xc000180000010000-0xc00018000001ffff]
[    0.919052] pci 0000:00:00.0:   bridge window [mem 0xc00000000-0xc1fffffff]
[    0.924704] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.932438] pci_bus 0000:00: resource 4 [io  0xc000180000010000-0xc00018000001ffff]
[    0.938784] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff]
[    0.943914] pci_bus 0000:01: resource 0 [io  0xc000180000010000-0xc00018000001ffff]
[    0.950259] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff]
[    0.955393] pci 0001:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
[    0.961563] pci 0001:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
[    0.967213] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.970864] pci 0001:00:00.0:   bridge window [io  0xc000180000030000-0xc00018000003ffff]
[    0.977732] pci 0001:00:00.0:   bridge window [mem 0xc20000000-0xc3fffffff]
[    0.983384] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.991118] pci_bus 0001:00: resource 4 [io  0xc000180000030000-0xc00018000003ffff]
[    0.997464] pci_bus 0001:00: resource 5 [mem 0xc20000000-0xc3fffffff]
[    1.002594] pci_bus 0001:01: resource 0 [io  0xc000180000030000-0xc00018000003ffff]
[    1.008939] pci_bus 0001:01: resource 1 [mem 0xc20000000-0xc3fffffff]
[    1.014072] pci_bus 0002:00: max bus depth: 3 pci_try_num: 4
[    1.018424] pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
[    1.024588] pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
[    1.030240] pci 0002:02:01.0: PCI bridge to [bus 03]
[    1.033896] pci 0002:04:00.0: VF BAR 0 [mem 0xc40020000-0xc4005ffff 64bit]: assigned
[    1.040327] pci 0002:02:02.0: PCI bridge to [bus 04-05]
[    1.044236] pci 0002:02:02.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    1.049888] pci 0002:02:03.0: PCI bridge to [bus 06]
[    1.053540] pci 0002:01:00.0: PCI bridge to [bus 02-06]
[    1.057450] pci 0002:01:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    1.063101] pci 0002:00:00.0: PCI bridge to [bus 01-06]
[    1.067014] pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
[    1.073880] pci 0002:00:00.0:   bridge window [mem 0xc40000000-0xc5fffffff]
[    1.079532] pci_bus 0002:00: No. 2 try to assign unassigned res
[    1.084145] pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: can't assign; no space
[    1.090310] pci 0002:00:00.0: BAR 0 [mem size 0x01000000]: failed to assign
[    1.095962] pci 0002:02:01.0: PCI bridge to [bus 03]
[    1.099615] pci 0002:02:02.0: PCI bridge to [bus 04-05]
[    1.103524] pci 0002:02:02.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    1.109176] pci 0002:02:03.0: PCI bridge to [bus 06]
[    1.112828] pci 0002:01:00.0: PCI bridge to [bus 02-06]
[    1.116738] pci 0002:01:00.0:   bridge window [mem 0xc40000000-0xc400fffff]
[    1.122391] pci 0002:00:00.0: PCI bridge to [bus 01-06]
[    1.126301] pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
[    1.133168] pci 0002:00:00.0:   bridge window [mem 0xc40000000-0xc5fffffff]
[    1.138820] pci_bus 0002:00: No. 3 try to assign unassigned res
[    1.143425] release child resource [mem 0xc40000000-0xc40003fff 64bit]
[    1.143432] release child resource [mem 0xc40010000-0xc4001ffff pref]
[    1.143438] release child resource [mem 0xc40020000-0xc4005ffff 64bit]
[    1.143445] pci 0002:02:02.0: resource 14 [mem 0xc40000000-0xc400fffff] released
[    1.149511] pci 0002:02:02.0: PCI bridge to [bus 04-05]
[    1.153424] pci 0002:01:00.0: resource 14 [mem 0xc40000000-0xc400fffff] released
[    1.159508] pci 0002:01:00.0: PCI bridge to [bus 02-06]
[    1.163421] pci 0002:00:00.0: resource 14 [mem 0xc40000000-0xc5fffffff] released
[    1.169505] pci 0002:00:00.0: PCI bridge to [bus 01-06]
[    1.173430] pci 0002:00:00.0: BAR 0 [mem 0xc40000000-0xc40ffffff]: assigned
[    1.179072] pci 0002:00:00.0: bridge window [mem size 0x20000000]: can't assign; no space
[    1.185936] pci 0002:00:00.0: bridge window [mem size 0x20000000]: failed to assign
[    1.192284] pci 0002:01:00.0: bridge window [mem size 0x00100000]: can't assign; no space
[    1.199150] pci 0002:01:00.0: bridge window [mem size 0x00100000]: failed to assign
[    1.205498] pci 0002:02:02.0: bridge window [mem size 0x00100000]: can't assign; no space
[    1.212364] pci 0002:02:02.0: bridge window [mem size 0x00100000]: failed to assign
[    1.218710] pci 0002:02:01.0: PCI bridge to [bus 03]
[    1.222366] pci 0002:04:00.0: ROM [mem size 0x00010000 pref]: can't assign; no space
[    1.228796] pci 0002:04:00.0: ROM [mem size 0x00010000 pref]: failed to assign
[    1.234706] pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: can't assign; no space
[    1.241399] pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: failed to assign
[    1.247572] pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: can't assign; no space
[    1.254526] pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: failed to assign
[    1.260960] pci 0002:02:02.0: PCI bridge to [bus 04-05]
[    1.264875] pci 0002:02:03.0: PCI bridge to [bus 06]
[    1.268526] pci 0002:01:00.0: PCI bridge to [bus 02-06]
[    1.272438] pci 0002:00:00.0: PCI bridge to [bus 01-06]
[    1.276347] pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
[    1.283219] pci_bus 0002:00: No. 4 try to assign unassigned res
[    1.287834] pci 0002:00:00.0: bridge window [mem size 0x20000000]: can't assign; no space
[    1.294690] pci 0002:00:00.0: bridge window [mem size 0x20000000]: failed to assign
[    1.301038] pci 0002:00:00.0: bridge window [mem size 0x20000000]: can't assign; no space
[    1.307903] pci 0002:00:00.0: bridge window [mem size 0x20000000]: failed to assign
[    1.314251] pci 0002:01:00.0: bridge window [mem size 0x00100000]: can't assign; no space
[    1.321117] pci 0002:01:00.0: bridge window [mem size 0x00100000]: failed to assign
[    1.327464] pci 0002:01:00.0: bridge window [mem size 0x00100000]: can't assign; no space
[    1.334332] pci 0002:01:00.0: bridge window [mem size 0x00100000]: failed to assign
[    1.340679] pci 0002:02:02.0: bridge window [mem size 0x00100000]: can't assign; no space
[    1.347545] pci 0002:02:02.0: bridge window [mem size 0x00100000]: failed to assign
[    1.353892] pci 0002:02:02.0: bridge window [mem size 0x00100000]: can't assign; no space
[    1.360759] pci 0002:02:02.0: bridge window [mem size 0x00100000]: failed to assign
[    1.367106] pci 0002:02:01.0: PCI bridge to [bus 03]
[    1.370762] pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: can't assign; no space
[    1.377450] pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: failed to assign
[    1.383623] pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: can't assign; no space
[    1.390578] pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: failed to assign
[    1.397012] pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: can't assign; no space
[    1.403704] pci 0002:04:00.0: BAR 0 [mem size 0x00004000 64bit]: failed to assign
[    1.409877] pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: can't assign; no space
[    1.416831] pci 0002:04:00.0: VF BAR 0 [mem size 0x00040000 64bit]: failed to assign
[    1.423264] pci 0002:02:02.0: PCI bridge to [bus 04-05]
[    1.427180] pci 0002:02:03.0: PCI bridge to [bus 06]
[    1.430830] pci 0002:01:00.0: PCI bridge to [bus 02-06]
[    1.434742] pci 0002:00:00.0: PCI bridge to [bus 01-06]
[    1.438652] pci 0002:00:00.0:   bridge window [io  0xc000180000050000-0xc00018000005ffff]
[    1.445523] pci_bus 0002:00: Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off
[    1.454821] pci_bus 0002:00: resource 4 [io  0xc000180000050000-0xc00018000005ffff]
[    1.461167] pci_bus 0002:00: resource 5 [mem 0xc40000000-0xc5fffffff]
[    1.466296] pci_bus 0002:01: resource 0 [io  0xc000180000050000-0xc00018000005ffff]
[    1.472930] PCI: Probing PCI hardware done
[    1.473058] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    1.477679] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.482112] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.489184] vgaarb: loaded
[    1.490753] clocksource: Switched to clocksource timebase
[    1.494957] VFS: Disk quotas dquot_6.6.0
[    1.497538] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.503180] netfs: FS-Cache loaded
[    1.505324] CacheFiles: Loaded
[    1.513715] NET: Registered PF_INET protocol family
[    1.517570] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.529342] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.536554] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.542946] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.549907] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.557562] TCP: Hash tables configured (established 65536 bind 65536)
[    1.562850] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.568387] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.574470] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.578859] PCI: CLS 32 bytes, default 64
[    1.583478] Initialise system trusted keyrings
[    1.586993] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    1.592116] zbud: loaded
[    1.593611] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.598255] fuse: init (API version 7.41)
[    1.601195] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, fatal assert, debug enabled
[    1.610505] 9p: Installing v9fs 9p2000 file system support
[    1.647982] NET: Registered PF_ALG protocol family
[    1.651398] Key type asymmetric registered
[    1.654177] Asymmetric key parser 'x509' registered
[    1.657805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.663903] io scheduler mq-deadline registered
[    1.667053] io scheduler kyber registered
[    1.670945] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    1.674615] crc32: self tests passed, processed 225944 bytes in 556880 nsec
[    1.680834] crc32c: CRC_LE_BITS = 64
[    1.683020] crc32c: self tests passed, processed 112972 bytes in 278640 nsec
[    1.735694] crc32_combine: 8373 self tests passed
[    1.786126] crc32c_combine: 8373 self tests passed
[    1.791227] ledtrig-cpu: registered to indicate activity on CPUs
[    1.796279] pcieport 0000:00:00.0: PME: Signaling with IRQ 20
[    1.801025] pcieport 0000:00:00.0: AER: enabled with IRQ 20
[    1.805816] pcieport 0001:00:00.0: PME: Signaling with IRQ 21
[    1.810523] pcieport 0001:00:00.0: AER: enabled with IRQ 21
[    1.815327] pcieport 0002:00:00.0: PME: Signaling with IRQ 22
[    1.820057] pcieport 0002:00:00.0: AER: enabled with IRQ 22
[    1.864091] bman_portal ff4000000.bman-portal: Portal initialised, cpu 0
[    1.869685] bman_portal ff4004000.bman-portal: Portal initialised, cpu 1
[    1.875241] bman_portal ff4008000.bman-portal: Portal initialised, cpu 2
[    1.880821] bman_portal ff400c000.bman-portal: Portal initialised, cpu 3
[    1.887790] qman_portal ff6000000.qman-portal: Portal initialised, cpu 0
[    1.893375] qman_portal ff6004000.qman-portal: Portal initialised, cpu 1
[    1.898974] qman_portal ff6008000.qman-portal: Portal initialised, cpu 2
[    1.904648] qman_portal ff600c000.qman-portal: Portal initialised, cpu 3
[    1.976919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.984156] printk: legacy console [ttyS0] disabled
[    1.988308] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 18750000) is a 16550A
[    1.995778] printk: legacy console [ttyS0] enabled
[    2.002699] printk: legacy bootconsole [udbg0] disabled
[    2.015009] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 18750000) is a 16550A
[    2.023268] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 18750000) is a 16550A
[    2.032122] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 18750000) is a 16550A
[    2.040358] ePAPR hypervisor byte channel driver
[    2.044338] [drm] radeon kernel modesetting enabled.
[    2.048252] [drm] initializing kernel modesetting (R580 0x1002:0x7244 0x1002:0x0B12 0x00).
[    2.055299] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[    2.104254] ATOM BIOS: X1950XT
[    2.106035] [drm] Generation 2 PCI interface, using max accessible memory
[    2.111534] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[    2.118945] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    2.125251] [drm] Detected VRAM RAM=256M, BAR=256M
[    2.128749] [drm] RAM width 256bits DDR
[    2.131916] [drm] radeon: 256M of VRAM memory ready
[    2.135516] [drm] radeon: 512M of GTT memory ready.
[    2.139133] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.145322] [drm] Possible lm63 thermal controller at 0x18
[    2.149575] [drm] radeon: power management initialized
[    2.167027] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[    2.180240] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    2.185883] radeon 0000:01:00.0: WB enabled
[    2.188778] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000
[    2.195666] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.200312] radeon 0000:01:00.0: radeon: using MSI.
[    2.203932] [drm] radeon: irq initialized.
[    2.206765] [drm] Loading R500 Microcode
[    2.209537] [drm] radeon: ring at 0x0000000010001000
[    2.213239] [drm] ring test succeeded in 2 usecs
[    2.216669] [drm] ib test succeeded in 0 usecs
[    2.220580] [drm] Radeon Display Connectors
[    2.223494] [drm] Connector 0:
[    2.225248] [drm]   DVI-I-1
[    2.226740] [drm]   HPD2
[    2.227976] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.234079] [drm]   Encoders:
[    2.235748] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.239067] [drm]     DFP3: INTERNAL_LVTM1
[    2.241865] [drm] Connector 1:
[    2.243619] [drm]   SVIDEO-1
[    2.245198] [drm]   Encoders:
[    2.246863] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[    2.250094] [drm] Connector 2:
[    2.251847] [drm]   DVI-I-2
[    2.253339] [drm]   HPD1
[    2.254570] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    2.260679] [drm]   Encoders:
[    2.262345] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.265664] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    2.270237] [drm] Initialized radeon 2.50.0 for 0000:01:00.0 on minor 0
[    2.375795] [drm] fb mappable at 0xC000C0000
[    2.378778] [drm] vram apper at 0xC00000000
[    2.381662] [drm] size 8294400
[    2.383418] [drm] fb depth is 24
[    2.385344] [drm]    pitch is 7680
[    2.458046] Console: switching to colour frame buffer device 240x67
[    2.510992] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[    2.530556] brd: module loaded
[    2.536996] loop: module loaded
[    2.539479] zram: Added device: zram0
[    2.542040] mpt3sas version 48.100.00.00 loaded
[    2.547081] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[    2.553291] scsi host0: sata_fsl
[    2.555532] ata1: SATA max UDMA/133 irq 68 lpm-pol 0
[    2.559393] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[    2.561417] ata1: Signature Update detected @ 0 msecs
[    2.565554] scsi host1: sata_fsl
[    2.570614] ata2: SATA max UDMA/133 irq 69 lpm-pol 0
[    2.605913] fsl_dpaa_mac ffe4e6000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e6000) failed
[    2.615002] fsl_dpaa_mac ffe4e6000.ethernet: FMan MEMAC
[    2.621915] fsl_dpaa_mac ffe4e6000.ethernet: Using random MAC address: 52:b2:7a:00:92:eb
[    2.630028] fsl_dpaa_mac ffe4e6000.ethernet eth0: Probed interface eth0
[    2.635527] e1000: Intel(R) PRO/1000 Network Driver
[    2.639121] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.643645] e1000e: Intel(R) PRO/1000 Network Driver
[    2.647315] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.652115] PPP generic driver version 2.4.2
[    2.655362] PPP BSD Compression module registered
[    2.658787] PPP Deflate Compression module registered
[    2.662555] PPP MPPE Compression module registered
[    2.666049] NET: Registered PF_PPPOX protocol family
[    2.672614] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    2.678225] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[    2.694107] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
[    2.703768] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    2.708188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    2.715177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.721140] usb usb1: Product: Freescale On-Chip EHCI Host Controller
[    2.726316] usb usb1: Manufacturer: Linux 6.12.48-powerpc64-smp ehci_hcd
[    2.731733] usb usb1: SerialNumber: fsl-ehci.0
[    2.731757] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.739918] ata1.00: ATA-11: Patriot P210 256GB, HDFEF3.3, max UDMA/133
[    2.740233] hub 1-0:1.0: USB hub found
[    2.745254] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 16/32)
[    2.747726] hub 1-0:1.0: 1 port detected
[    2.753346] ata1.00: configured for UDMA/133
[    2.756395] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[    2.759297] scsi 0:0:0:0: Direct-Access     ATA      Patriot P210 256 F3.3 PQ: 0 ANSI: 5
[    2.764380] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[    2.772107] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.780998] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    2.787118] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
[    2.787403] sd 0:0:0:0: [sda] Write Protect is off
[    2.794982] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.795061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.796769] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[    2.802916] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    2.807219] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    2.818941] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.824871] usb usb2: Product: Freescale On-Chip EHCI Host Controller
[    2.830017] usb usb2: Manufacturer: Linux 6.12.48-powerpc64-smp ehci_hcd
[    2.835424] usb usb2: SerialNumber: fsl-ehci.1
[    2.839080] hub 2-0:1.0: USB hub found
[    2.841584] hub 2-0:1.0: 1 port detected
[    2.844571] usbcore: registered new interface driver usblp
[    2.845339]  sda: RDSK (512) sda1 (SFS^@)(res 2 spb 1) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^@)(res 2 spb 1)
[    2.848940] usbcore: registered new interface driver usb-storage
[    2.857563] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.862844] mousedev: PS/2 mouse device common for all mice
[    2.869734] i2c_dev: i2c /dev entries driver
[    2.874111] mpc-i2c ffe118000.i2c: timeout 1000000 us
[    2.885223] rtc-ds1307 5-0068: registered as rtc0
[    2.889675] rtc-ds1307 5-0068: setting system clock to 2026-04-12T18:09:22 UTC (1776017362)
[    2.897067] mpc-i2c ffe118100.i2c: timeout 1000000 us
[    2.901640] mpc-i2c ffe119000.i2c: timeout 1000000 us
[    2.905970] mpc-i2c ffe119100.i2c: timeout 1000000 us
[    2.911730] i2c i2c-6: Added multiplexed i2c bus 9
[    2.915555] i2c i2c-6: Added multiplexed i2c bus 10
[    2.919446] i2c i2c-6: Added multiplexed i2c bus 11
[    2.923351] i2c i2c-6: Added multiplexed i2c bus 12
[    2.926966] pca954x 6-0077: registered 4 multiplexed busses for I2C switch pca9546
[    2.933705] ptp_qoriq: device tree node missing required elements, try automatic configuration
[    2.943315] sdhci: Secure Digital Host Controller Interface driver
[    2.948232] sdhci: Copyright(c) Pierre Ossman
[    2.951482] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.957612] hid: raw HID events driver (C) Jiri Kosina
[    2.963236] usbcore: registered new interface driver usbhid
[    2.967544] usbhid: USB HID core driver
[    2.970425] Freescale hypervisor management driver
[    2.973944] fsl-hv: no hypervisor found
[    2.981843] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA 64-bit
[    2.989818] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    2.994860] IPv4 over IPsec tunneling driver
[    2.998320] Initializing XFRM netlink socket
[    3.001393] NET: Registered PF_INET6 protocol family
[    3.006098] Segment Routing with IPv6
[    3.008523] In-situ OAM (IOAM) with IPv6
[    3.011216] mip6: Mobile IPv6
[    3.013412] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.019358] NET: Registered PF_PACKET protocol family
[    3.023148] NET: Registered PF_KEY protocol family
[    3.026664] lec:lane_module_init: lec.c: initialized
[    3.030369] mpoa:atm_mpoa_init: mpc.c: initialized
[    3.033907] l2tp_core: L2TP core driver, V2.0
[    3.040454] mmc0: new high speed SDHC card at address aaaa
[    3.045471] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
[    3.050122] DCCP: Activated CCID 2 (TCP-like)
[    3.050500]  mmcblk0: p1
[    3.053220] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[    3.059037] DCCP is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list
[    3.067543] sctp: Hash tables configured (bind 256/256)
[    3.071808] NET: Registered PF_RDS protocol family
[    3.075371] Registered RDS/tcp transport
[    3.077998] tipc: Activated (version 2.0.0)
[    3.078767] ata2: Signature Update detected @ 502 msecs
[    3.080948] NET: Registered PF_TIPC protocol family
[    3.088515] tipc: Started in single node mode
[    3.089770] usb 2-1: new high-speed USB device number 2 using fsl-ehci
[    3.091607] 9pnet: Installing 9P2000 support
[    3.100446] Key type dns_resolver registered
[    3.123579] Loading compiled-in X.509 certificates
[    3.131761] Key type .fscrypt registered
[    3.134438] Key type fscrypt-provisioning registered
[    3.139788] Key type encrypted registered
[    3.144916] clk: Disabling unused clocks
[    3.147584] ALSA device list:
[    3.149251]   #0: Virtual MIDI Card 1
[    3.152005] Waiting 5 sec before mounting root device...
[    3.222113] usb 2-1: New USB device found, idVendor=0424, idProduct=2517, bcdDevice= 0.02
[    3.229014] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.235435] hub 2-1:1.0: USB hub found
[    3.237983] hub 2-1:1.0: 7 ports detected
[    3.238770] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.246307] ata2.00: ATA-10: TS128GSSD230S, R0427GN1, max UDMA/133
[    3.251225] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 16/32)
[    3.256734] ata2.00: ATA Identify Device Log not supported
[    3.261057] ata2.00: configured for UDMA/133
[    3.264734] scsi 1:0:0:0: Direct-Access     ATA      TS128GSSD230S    7GN1 PQ: 0 ANSI: 5
[    3.272676] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.273845] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.282938] sd 1:0:0:0: [sdb] Write Protect is off
[    3.286442] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.286496] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.294360] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[    3.310059]  sdb: RDSK (512) sdb1 ((res 2 spb 1) sdb2 ((res 2 spb 1)
[    3.315461] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.543768] usb 2-1.1: new low-speed USB device number 3 using fsl-ehci
[    3.656974] usb 2-1.1: New USB device found, idVendor=04d9, idProduct=1503, bcdDevice= 4.03
[    3.664047] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.670065] usb 2-1.1: Product: USB Keyboard
[    3.673047] usb 2-1.1: Manufacturer:  
[    3.686602] input:   USB Keyboard as /devices/platform/ffe000000.soc/ffe211000.usb/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/0003:04D9:1503.0001/input/input0
[    3.750675] hid-generic 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-fsl-ehci.1-1.1/input0
[    3.775772] input:   USB Keyboard System Control as /devices/platform/ffe000000.soc/ffe211000.usb/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/0003:04D9:1503.0002/input/input1
[    3.840036] input:   USB Keyboard Consumer Control as /devices/platform/ffe000000.soc/ffe211000.usb/fsl-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/0003:04D9:1503.0002/input/input2
[    3.854146] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-fsl-ehci.1-1.1/input1
[    3.937778] usb 2-1.2: new high-speed USB device number 4 using fsl-ehci
[    4.053479] usb 2-1.2: New USB device found, idVendor=4146, idProduct=ba65, bcdDevice= 1.00
[    4.060567] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.066586] usb 2-1.2: Product: USB Mass Storage Device
[    4.070526] usb 2-1.2: Manufacturer: PRETEC UG-04GB
[    4.074107] usb 2-1.2: SerialNumber: e4d39773f1e74c
[    4.078215] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    4.083634] scsi host2: usb-storage 2-1.2:1.0
[    4.159771] usb 2-1.3: new low-speed USB device number 5 using fsl-ehci
[    4.255220] usb 2-1.3: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00
[    4.262292] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.268310] usb 2-1.3: Product: USB OPTICAL MOUSE
[    4.276136] input: USB OPTICAL MOUSE as /devices/platform/ffe000000.soc/ffe211000.usb/fsl-ehci.1/usb2/2-1/2-1.3/2-1.3:1.0/0003:093A:2521.0003/input/input3
[    4.289273] hid-generic 0003:093A:2521.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-fsl-ehci.1-1.3/input0
[    5.127638] scsi 2:0:0:0: Direct-Access     Pretec   UltimatGuard     6.00 PQ: 0 ANSI: 2
[    5.135134] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.274105] sd 2:0:0:0: [sdc] 7892040 512-byte logical blocks: (4.04 GB/3.76 GiB)
[    5.280861] sd 2:0:0:0: [sdc] Write Protect is off
[    5.284364] sd 2:0:0:0: [sdc] Mode Sense: 00 00 00 00
[    5.284723] sd 2:0:0:0: [sdc] Asking for cache data failed
[    5.288921] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    5.309362]  sdc: sdc1
[    5.310647] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    8.331519] EXT4-fs (sdb1): mounted filesystem 93cb7dd2-ce1b-4bf5-ba47-818cf8e8c9f4 ro with ordered data mode. Quota mode: none.
[    8.341883] VFS: Mounted root (ext4 filesystem) readonly on device 8:17.
[    8.348888] devtmpfs: mounted
[    8.350898] Freeing unused kernel image (initmem) memory: 464K
[    8.355460] This architecture does not have kernel memory protection.
[    8.360622] Run /sbin/init as init process
[    8.363422]   with arguments:
[    8.363427]     /sbin/init
[    8.363431]   with environment:
[    8.363435]     HOME=/
[    8.363440]     TERM=linux
[    8.608758] raid6: int64x8  gen()   773 MB/s
[    8.628775] raid6: int64x4  gen()   914 MB/s
[    8.648755] raid6: int64x2  gen()  1417 MB/s
[    8.667770] raid6: int64x1  gen()  1012 MB/s
[    8.670741] raid6: using algorithm int64x2 gen() 1417 MB/s
[    8.691762] raid6: .... xor() 720 MB/s, rmw enabled
[    8.695341] raid6: using intx1 recovery algorithm
[    8.699860] xor: measuring software checksum speed
[    8.704290]    8regs           :  3567 MB/sec
[    8.708476]    8regs_prefetch  :  2912 MB/sec
[    8.712430]    32regs          :  3706 MB/sec
[    8.716642]    32regs_prefetch :  2841 MB/sec
[    8.719700] xor: using function: 32regs (3706 MB/sec)
[    8.795168] Btrfs loaded, zoned=no, fsverity=no
[    8.806567] tun: Universal TUN/TAP device driver, 1.6
[    8.823670] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    8.864334] Bluetooth: Core ver 2.22
[    8.866797] NET: Registered PF_BLUETOOTH protocol family
[    8.870824] Bluetooth: HCI device and connection manager initialized
[    8.875903] Bluetooth: HCI socket layer initialized
[    8.879490] Bluetooth: L2CAP socket layer initialized
[    8.883264] Bluetooth: SCO socket layer initialized
[    8.952347] udevd[1863]: starting version 3.2.11
[   10.552768] random: crng init done
[   10.600530] udevd[1865]: starting eudev-3.2.11
[   10.852341] hwmon hwmon0: temp1_input not attached to any thermal zone
[   10.867947] hwmon hwmon0: temp2_input not attached to any thermal zone
[   11.326834] EXT4-fs (sdb1): re-mounted 93cb7dd2-ce1b-4bf5-ba47-818cf8e8c9f4.
[   11.676518] EXT4-fs (sdb1): re-mounted 93cb7dd2-ce1b-4bf5-ba47-818cf8e8c9f4 r/w.
[   11.889097] udevd[3456]: starting version 3.2.11
[   11.915071] udevd[3456]: starting eudev-3.2.11
[   12.359427] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.363472] Bluetooth: BNEP filters: protocol multicast
[   12.367425] Bluetooth: BNEP socket layer initialized
[   12.434828] elogind-daemon[3505]: New seat seat0.
[   12.440541] elogind-daemon[3505]: Watching system buttons on /dev/input/event0 (  USB Keyboard)
[   12.448420] elogind-daemon[3505]: Watching system buttons on /dev/input/event1 (  USB Keyboard System Control)
[   12.664099] fsl_dpaa_mac ffe4e6000.ethernet eth0: PHY [0x0000000ffe4fc000:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[   12.664119] fsl_dpaa_mac ffe4e6000.ethernet eth0: configuring for phy/rgmii-id link mode
[   14.065856] elogind-daemon[3505]: New session c1 of user lightdm.
[   16.775908] fsl_dpaa_mac ffe4e6000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   20.301024] elogind-daemon[3505]: Removed session c1.
[   20.378859] elogind-daemon[3505]: New session c2 of user amigaone.
[   25.700527] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Hyperion Entertainment Message Boards

New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels

Re: New kernels