Booting error AOS4.1.2

This forum is for all AmigaOne 500, Sam440 and Sam460 specific issues.
Post Reply
User avatar
Joeled
Posts: 73
Joined: Tue Mar 13, 2012 4:37 pm
Location: Uppsala, Sweden

Booting error AOS4.1.2

Post by Joeled »

I added a new harddisk to my AmigaOne 500 and booted on aos4.1.2 dvd. Read and install the new harddisk. Installed sbl and saved to harddisk. Then i added sfs/02 as filesystem and choosed blocksize 512 and buffers 1000. Did a format on the partition and then installed aos4.1.2. When i try to boot i get the message "Harddisk not found". I also get the message "No config files found in any supported media/device"- "No configuration file found in any partition".

Whats wrong?
Spectre660
Posts: 1494
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Booting error AOS4.1.2

Post by Spectre660 »

Boot from your install CD or Sdcard and set the following Uboot vairiable in CLI

Nvsetvar sii3512ide_conf =21
User avatar
Joeled
Posts: 73
Joined: Tue Mar 13, 2012 4:37 pm
Location: Uppsala, Sweden

Re: Booting error AOS4.1.2

Post by Joeled »

Spectre660 wrote:Boot from your install CD or Sdcard and set the following Uboot vairiable in CLI

Nvsetvar sii3512ide_conf =21
I booted on the cd-rom and added this in shell. I also tried it in ubot and boot arguments for linux but it didnt work. Now when i try to boot on any harddisk or aos4.2 bootmedia i get amiga kernel and a purple picture of a floppy(os3x)

How can i revert it so i can get back bootmeny?
User avatar
Joeled
Posts: 73
Joined: Tue Mar 13, 2012 4:37 pm
Location: Uppsala, Sweden

Re: Booting error AOS4.1.2

Post by Joeled »

This happens when i try to start my working harddisk or try to boot on aos4 bootmedia. How can i get rid of this? I guess it has to do something with uboot loading. Is there an hardware reset or something that can remove this Nvsetvar sii3512ide_conf = 21 i typed earlier.

Image
Spectre660
Posts: 1494
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Booting error AOS4.1.2

Post by Spectre660 »

@joeled

from the Uboot shell

setenv sii3512ide_conf
saveenv
User avatar
Joeled
Posts: 73
Joined: Tue Mar 13, 2012 4:37 pm
Location: Uppsala, Sweden

Re: Booting error AOS4.1.2

Post by Joeled »

Its working now :) thanks for the help. My next question is if its impossible to install aos4.1 on another harddisk? I tried several times adding slb v2 but after installation configurationsfile is still missing?
Post Reply