musa wrote: ↑Wed Jun 08, 2022 12:00 pm
Hi
I have tried several times with kernel 5.19-rc1 but each time end up with something look like a hardware error with the sata drives.
I am using a new fat16 formatted uskb disk to the kernel.
i do not have this error on any of my other linux installations or kernels that I am using right now.
here is one of the error messages: sata3.00: failed to identify (I/O error, err_mask=0x4)
sata3: sata link up 1.5 gbps (sstatus113 scontrol 310)
Have a nice day
Hi Musa,
I haven't found "sata3" in my dmesg. I only found "ata3" entries. Do you use a sata pci card?
ata3 works:
Code: Select all
──(root💀mintppc)-[~]
└─# dmesg | grep ata3
[ 3.110578] ata3: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209200 irq 9
[ 3.427295] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.430304] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 3.430316] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.434126] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.434132] ata3.00: configured for UDMA/100
There aren't any sata1.00, sata2.00, or sata3.00 entries.
Code: Select all
┌──(root💀mintppc)-[~]
└─# dmesg | grep ata
[ 0.000000] Memory: 8065112K/8388608K available (21216K kernel code, 3136K rwdata, 7988K rodata, 8116K init, 637K bss, 323496K reserved, 0K cma-reserved)
[ 0.298623] libata version 3.00 loaded.
[ 3.110567] ata1: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209100 irq 9
[ 3.110573] ata2: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209180 irq 9
[ 3.110578] ata3: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209200 irq 9
[ 3.110583] ata4: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209280 irq 9
[ 3.111641] scsi host4: pata_atiixp
[ 3.111941] scsi host5: pata_atiixp
[ 3.112015] ata5: PATA max UDMA/100 cmd 0x11030 ctl 0x11054 bmdma 0x11000 irq 9
[ 3.112020] ata6: DUMMY
[ 3.427220] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.427262] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.427295] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.427326] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.427763] ata1.00: ATA-8: ST2000DM001-9YN164, CC4B, max UDMA/133
[ 3.430304] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 3.430316] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.434126] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.434132] ata3.00: configured for UDMA/100
[ 3.512562] ata4.00: ATA-8: ESA3SF1240GB, 4.C.V, max UDMA/133
[ 3.515132] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.540081] ata4.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.540093] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.620121] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.620126] ata4.00: configured for UDMA/133
[ 3.668274] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 3.668287] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.668945] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.668949] ata1.00: configured for UDMA/133
[ 4.099944] scsi host6: pata_pcmcia
[ 4.100036] ata7: PATA max PIO0 cmd 0x811000 ctl 0x81100e irq 18
[ 4.112895] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[ 4.269460] ata7.00: CFA: SanDisk SDCFB-256, HDX 2.33, max PIO4
[ 4.269468] ata7.00: 501760 sectors, multi 0: LBA
Maybe an issue with a pci card. Please post the output of
dmesg | grep ata. Is it possible to boot Linux from another drive?
Cheers,
Christian