Hyperion Entertainment Message Boards

Hi guys Awhile ago ive put a extra hdd (SSD) into my amigaone 500 partitions made tried several time to ad a JFX partition but it never shows up into WB ones booted, so i can't format the partition.

in the beginning i had a working jfx partition but it just doesnt show up.

any help please....

Your new HDD won't show up unless you change the env-variable xxx_conf to include it.
How is it connected? SATA? Which device is supporting SATA in that machine?

i now have two hdd inside, 1 boot is SSD and second my old 500gb sata drive both show up but not if change a partition on the 500gb disk from sfs/02 to jfx as long i choose FFS or SFS nothing wrong and partitions are shown and can be formated but as soon i select jfx filesystem after a reboot all partition are shown expect the jfx one so i cant format it.

thats the problem, jfx filesystem is loaded in the kicklayout

klapdeur wrote:i now have two hdd inside, 1 boot is SSD and second my old 500gb sata drive both show up but not if change a partition on the 500gb disk from sfs/02 to jfx as long i choose FFS or SFS nothing wrong and partitions are shown and can be formated but as soon i select jfx filesystem after a reboot all partition are shown expect the jfx one so i cant format it.

The block size for JXFS must be 512. If it isn't, the partition won't even show up.

thnx blocksize was the problem
problem Solved

change your title to include solved please