Hyperion Entertainment Message Boards

Hello of people,

I wanted to report only in my Amiga the 4000D since yesterday a privately converted Radeon 9200 functioned!

Yours sincerely

Mika

But without Warp3D and Composition Engine

tommysammy wrote:But without Warp3D and Composition Engine

If you are using the correct ATIRadeon.chip, then compositing and Warp3D will work under AmigaOS 4.1 on Classic.

@Mika
I have same card. Do you want explain your conversion? thanks in advance.

Fogg_80 wrote:@Mika
I have same card. Do you want explain your conversion? thanks in advance.

Sorry my English is not so good, I understands not which you to me to say wants!

Mit freundlichen Grüssen

Mika

Germany

Ich habe Ihre derselben Karte. Welche Änderungen sind erforderlich, damit es funktioniert? Die Frage ist, klar?

P.S. Translation with google.

Fogg_80 wrote:Ich habe Ihre derselben Karte. Welche Änderungen sind erforderlich, damit es funktioniert? Die Frage ist, klar?

P.S. Translation with google.

Oh,

A friend has converted the voltage on the graphics card.

I've installed the OS 4.1 Classic with my Voodoo 3000 graphics card.

I've changed my Kickstart4000 following:

; MODULE Kickstart/x86emu.resource.kmod
; MODULE kickstart / PCI / Graphics.card

New entries:

MODULE Libs: pci.library
MODULE Libs: Picasso96/Radeon

Additional entry in:

BOARD TYPE = file = Kickstart/p96Config Radeon

Radeon Storage monitors, moved to the Devs Monitors

Files of Elbox:

10.0 pci.library copied to Libs
Radeon.card 2.7 changes to Libs: Picasso96 copied

Then the Picasso96Settings of 3.9 (4.0), copy it into the drawer Devs

Then I closed the jumper on my board mediators, WinSize and really master will also be closed SwapConfig the jumper that goes with me, unfortunately not (yellow screen), so I have this left open.

I hope I made ​​myself understood, I got myself these tips from other users!

Yours sincerely,

Mika

I can only say this ever so often, so I am going to say it one more time and then shut up about it since people obviously do not want to listen to it.

Mixing Elbox' 68k PCI library and AmigaOS 4.x' native PCI support does not work and will at best result in instabilities, at worst in data loss.

There. I have said it. If you still insist on trying it, you're welcome to it, but this is guaranteed to NOT WORK AT ALL. Anything that happens is not an accident, nor is it a bug in AmigaOS. It's your own risk to take.

Hans-Joerg Frieden wrote:I can only say this ever so often, so I am going to say it one more time and then shut up about it since people obviously do not want to listen to it.

Mixing Elbox' 68k PCI library and AmigaOS 4.x' native PCI support does not work and will at best result in instabilities, at worst in data loss.

There. I have said it. If you still insist on trying it, you're welcome to it, but this is guaranteed to NOT WORK AT ALL. Anything that happens is not an accident, nor is it a bug in AmigaOS. It's your own risk to take.

Yes I know that is not the one the data mix!

My Amiga 4000 is just a fun computer, so there are no important data on it, and a backup copy of my OS4.1 installation is on a network hard drive!

It is fun just to get things up and running, so they work on a 20-year-old computer!

Yours sincerely,

Mika

Yes !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

My Radeon which works without limitations, native with the settings which are set by the OS 4.1 Classic, it was the wrong jumper settings on my mediator-board!

Yours sincerely,

Mika