Support Forum
https://forum.hyperion-entertainment.com/
https://forum.hyperion-entertainment.com/viewtopic.php?t=4713
Ok, thanks! Cleanup was indeed needed, all those files took almost 2 GB of disk space!xeno74 wrote: Tue Oct 12, 2021 4:21 pm Yes, it downloads the packages on the HD. It's possible to remove packages from /var/cache/xbps manually.
Thank you Roland for your advice.Roland wrote: Wed Oct 13, 2021 2:49 pm Attention:
@Amiguy
Please try to set in vlc's Video settings "Output" to "X11 video output (XBC)"
Even a restart does not solve the problem.Yes, I am on the RC5. This is a phenomenon that first appeared after using pipe-viewer. I reinstalled a backup (
)and in fact find that it is rather the execution of VLC which causes this fault on my sound card.Great!Amiguy wrote: Thu Oct 14, 2021 10:18 am I ordered a Radeon HD 6970 card. The vendor is not sure if it is still operational. We will see...
Code: Select all
# Default rc.local for void; add your custom commands here.
#
# This is run by runit in stage 2 before the services are executed
# (see /etc/runit/2).
iptables -t filter -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -t filter -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -t filter -A INPUT -i lo -j ACCEPT
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP
Hi, Christian, I'm trying again, with the USB stick route this time rather than straight to disk. I copied to an empty /dev/sdc and got the same results you show, but when I came to the e2fsck thing I guessed I should add a "2" as you did and got "No such file or directory ..." I rebooted the computer anyway and tried to boot void but ls usc 0:1 got me a "no such thing available" type of message.xeno74 wrote: Fri Oct 08, 2021 12:57 pm
You can image your USB stick with Void with the following commands (Example for sdb):
Code: Select all
dd if=void-live-powerpc-20211007.img of=/dev/sdbCode: Select all
15695871+0 records in 15695871+0 records out 8036285952 bytes (8.0 GB, 7.5 GiB) copied, 2364.19 s, 3.4 MB/sCode: Select all
e2fsck -f /dev/sdb2
Code: Select all
/dev/sdc1 (key) fat16 /media/fie... VOID_BOOT 230-.00 MiB (Used) 146.25 MiB
/dev/sdc2 (key) ext4 /media/fie... void 7.26 GiB (Used) 5.73 GiB
unallocated (size) 22.33 GiBCode: Select all
root@Fienix:~# e2fsck -f /dev/sdc2
e2fsck 1.45.6 (20-Mar-2020)
/dev/sdc2 is mounted.
e2fsck: Cannot continue, aborting.Could that be what I'm doing wrong? How big should I make those things?You can use GParted for enlarging the partition and resizing the root file system.
"ls usc 0:1" is wrong. Please try "ls usb 0:1".kilaueabart wrote: Thu Oct 28, 2021 11:47 pm I rebooted the computer anyway and tried to boot but ls usc 0:1 got me a "no such thing available" type of message.
You have to "umount" the device with "umount /dev/sdc2" before you can check the file system.kilaueabart wrote: Thu Oct 28, 2021 11:47 pm Now for some reason e2fsck sort of works, at least it finds the stick:Code: Select all
root@Fienix:~# e2fsck -f /dev/sdc2 e2fsck 1.45.6 (20-Mar-2020) /dev/sdc2 is mounted. e2fsck: Cannot continue, aborting.
xeno74 wrote: Thu Oct 28, 2021 11:51 pm"ls usc 0:1" is wrong. Please try "ls usb 0:1".kilaueabart wrote: Thu Oct 28, 2021 11:47 pm I rebooted the computer anyway and tried to boot but ls usc 0:1 got me a "no such thing available" type of message.
