Page 10 of 24
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Tue Mar 22, 2016 4:50 pm
by papaoskar
zappa2009 wrote:papaoskar wrote:
Here I am again: See the last screen reached with kernel 4.20 an the Mate-image from spectre with NI-suffix.
How to put pictures in here?
With the "Upload-attachent" beside the Options. You will see if you write an Posting
How blind I am! Thank you very much to enlighten me! Here comes the screen shot:
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Tue Mar 22, 2016 8:19 pm
by xeno74
papaoskar wrote:
Here I am again: See the last screen reached with kernel 4.20 an the Mate-image from spectre with NI-suffix.
I think there is something wrong with the USB flash drive. Would you mind coping the NI img to another USB flash drive?
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Wed Mar 23, 2016 5:48 pm
by papaoskar
My next question: How has the structure of the CF-Card to look like?
My card looks as this : Is this okay?
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Wed Mar 23, 2016 6:19 pm
by papaoskar
Hi Xeno,
Taken your advice and did another dd for the 8GB stick. Took around 48 minutes!
What about copying the stick content to a HDD partition? And then boot the HDD partition?
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Wed Mar 23, 2016 11:25 pm
by zappa2009
papaoskar wrote:
What about copying the stick content to a HDD partition? And then boot the HDD partition?
Yes this is possible.
But you need the right /dev/sdx argument for dd.
After dd you need to update/change the /etc/fstab with the new UUID for the rootfs there.
Because the UUID is different.
I test this with the Opensuse13.2 and fedora17 images bevor. I must update /etc/fstab otherwise the boot hangs at "Cant find an rootfs ...."
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Thu Mar 24, 2016 9:40 am
by xeno74
papaoskar wrote:My next question: How has the structure of the CF-Card to look like?
My card looks as this : Is this okay?
Hi Papaoskar,
Well, you only need the kernels and initrds on your CF card.
Cheers,
Christian
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Thu Mar 24, 2016 2:23 pm
by papaoskar
xeno74 wrote:papaoskar wrote:My next question: How has the structure of the CF-Card to look like?
My card looks as this : Is this okay?
Hi Papaoskar,
Well, you only need the kernels and initrds on your CF card.
Cheers,
Christian
Hi Christian,
but where do the kernel modules go? As every kernel seems to have different modules it is important question. Up to now I copied the kernel modules directory on to the target drive /lib
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Thu Mar 24, 2016 3:03 pm
by xeno74
papaoskar wrote:
Hi Christian,
but where do the kernel modules go?
You could copy some kernel modules directories to
/lib/modules if you like.
For example the kernel modules directory for the stable longterm kernel 4.1.20:
Code: Select all
sudo cp -R 4.1.20_A-EON_AmigaONE_X1000_Nemo /lib/modules/
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Thu Mar 24, 2016 9:08 pm
by papaoskar
I always get the message: Failed to load modules. They were not found. This was the reason why I asked, where the modules belong.
Re: (X)(L)ubuntu (MATE) 16.04 LTS
Posted: Fri Mar 25, 2016 5:28 pm
by xeno74
papaoskar wrote:I always get the message: Failed to load modules. They were not found. This was the reason why I asked, where the modules belong.
I have this message too and nevertheless all my kernel modules are working.
@All
ubuntu MATE 16.04 Final Beta is out!
Julian has recently released a new image of the final beta for the AmigaONE X1000 with Radeon HD Northern Islands graphics cards.
Download:
Ubuntu-Mate_16.04-X1000-NI-2.img.7z