Hyperion Entertainment Message Boards

Skateman wrote: Mon Jun 03, 2024 8:38 am Kernel 6.10 RC2 is running fine on my AmigaOne X5000

Fantastic! Many thanks for testing!

I successfully tested the RC2 in a virtual e5500 QEMU PowerPC machine with Bochs VGA (-device VGA,vgamem_mb=256) and after that with the VirtIO GPU:

Hi All,

I have released the stable longterm kernel 5.10.218.

Download: github.com

This kernel has been patched with the dpaa-v2.patch because of an issue with DPAA on Ubuntu 16.04.

It's suitable for old Linux distributions which don't work with the latest kernels for example Ubuntu 10.04.
It's also suitable if you have some issues with the latest kernels.

@Roland
Could you please test this kernel? I want to make sure that it works for you.

@All
Of course you can also test it.

Thanks,
Christian

Ooh, something NEW going wrong. My 3.0 GB Volume, where I keep working kernels, contains uImage-6.10. Fienix's /lib/modules has 6.10.0-rc2-powerpc64-smp. System monitor says I'm running Kernel Linux 6.9.0-powerpc64-smp ppc64.

What might have gone wrong?

kilaueabart wrote: Mon Jun 10, 2024 1:33 am Ooh, something NEW going wrong. My 3.0 GB Volume, where I keep working kernels, contains uImage-6.10. Fienix's /lib/modules has 6.10.0-rc2-powerpc64-smp. System monitor says I'm running Kernel Linux 6.9.0-powerpc64-smp ppc64.

What might have gone wrong?

You have booted the kernel 6.9. Do you use the U-Boot variable “linuxboot”?
If yes, you have to modify it.


Further information: Set up the button "Start Linux"

xeno74 wrote: Thu Jun 06, 2024 8:28 pm I have released the stable longterm kernel 5.10.218.

Download: [url=https://github.com/chzigotzky/kernels/r ... /v5.10.218]

Could you please give a direct link to the downloadable package? I cannot find it from the general github links above.

Roland wrote: Mon Jun 10, 2024 11:08 am Could you please give a direct link to the downloadable package? I cannot find it from the general github links above.

Here you are: linux-image-5.10.218-X1000_X5000.tar.gz

Hi All,

I released the RC3 of kernel 6.10 for the X1000 and X5000 today.

Download and further information: github.com

Please test the kernels.

Thanks,
Christian

xeno74 wrote: Mon Jun 10, 2024 4:56 am
You have booted the kernel 6.9. Do you use the U-Boot variable “linuxboot”?
If yes, you have to modify it.

I finally remembered that I had to editenv "6.9" to "6.10" somewhere, so now I am running 6.10 successfully. I can't believe how much I am forgetting these days! Raging dementia.

I haven't been using linuxboot, but I guess I'll set it up as you suggest. I'll still go to Commands and "run fienix."

It took me a long time to figure out how to download rc2, but I can't remember how I did it, and now I can't get rc3! Hint, please.