Page 146 of 148
Re: New kernels
Posted: Wed Jul 08, 2026 2:18 pm
by xeno74
xeno74 wrote: Sat Jul 04, 2026 9:34 am
Hi All,
I have released the stable long-term kernel
5.10.259 with some PowerPC fixes for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).
Download and further information:
github.com
I have added some legacy DRM drivers (3dfx, ATi, and MGA) to the stable long-term uImage-5.10.
Downloads:
github.com
Kernel 5.10.259 with the ATi Rage 128 PRO AGP 4X:
Re: New kernels
Posted: Fri Jul 10, 2026 1:48 pm
by xeno74
I have released the stable long-term kernel
5.10.260 with some legacy DRM drivers (3dfx, Matrox, and ATi) today.
Download and further information:
github.com
Re: New kernels
Posted: Fri Jul 10, 2026 8:26 pm
by xeno74
I’ve discovered, whilst working with Yellow Dog Linux, that we still need the
dpaa-v2.patch patch for the stable long-term kernel 5.10. So I’ll be releasing an additional patched uImage
5.10.260.
Re: New kernels
Posted: Mon Jul 13, 2026 9:26 am
by xeno74
Hi All,
I released the
RC3 of kernel
7.2 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs) today.
Download and further information:
github.com
Please test the kernels.
Thanks,
Christian
Re: New kernels
Posted: Sun Jul 19, 2026 2:56 pm
by xeno74
We are currently testing a new patch for the DPAA Ethernet.
Further information:
github.com
I don't see any differences. Switching between 100Mbit/s and 1Gbit/s works without any problems.
Code: Select all
[ 1692.006428] fsl_dpaa_mac ffe4e8000.ethernet eth0: PHY [mdio@ffe4e1120:03] driver [Micrel KSZ9021 Gigabit PHY] (irq=POLL)
[ 1692.006448] fsl_dpaa_mac ffe4e8000.ethernet eth0: configuring for phy/rgmii link mode
[ 1692.021436] fsl_dpaa_mac ffe5e8000.ethernet eth2: PHY [mdio@ffe4e1120:07] driver [Micrel KSZ9021 Gigabit PHY] (irq=POLL)
[ 1692.021456] fsl_dpaa_mac ffe5e8000.ethernet eth2: configuring for phy/rgmii link mode
[ 1695.057699] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2148.681140] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Down
[ 2149.704534] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 2199.875179] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Down
[ 2201.923103] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Re: New kernels
Posted: Mon Jul 20, 2026 7:49 am
by xeno74
Hi All,
Here is the
RC4 of kernel
7.2 with MATROX MGA-G200 support for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).
Download and further information:
github.com
Please test the kernels.
Thanks,
Christian
Re: New kernels
Posted: Mon Jul 27, 2026 9:41 am
by xeno74
Hi All,
I have released the
RC5 of kernel
7.2 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).
Download and further information:
github.com
Please test the kernels.
Thanks,
Christian
Re: New kernels
Posted: Wed Jul 29, 2026 10:31 am
by xeno74
Hi All,
I have released the stable long-term kernel
5.10.261 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).
Download and further information:
github.com
Cheers,
Christian
Re: New kernels
Posted: Tue Aug 04, 2026 4:35 pm
by Skateman
Kernel 7.2 RC5 up and running on my MintPPC Mirari
Big picture
https://www.skateman.nl/wp-content/uplo ... -31-03.png
Re: New kernels
Posted: Tue Aug 04, 2026 5:13 pm
by xeno74
Skateman wrote: Tue Aug 04, 2026 4:35 pm
Kernel 7.2 RC5 up and running on my MintPPC Mirari
Skateman is back!!!!!
Thank you for testing!
