New kernels

[xeno74]

Hi All,

I have released the stable long-term kernel 5.10.259 with some PowerPC fixes for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).

Download and further information: github.com

I have added some legacy DRM drivers (3dfx, ATi, and MGA) to the stable long-term uImage-5.10.

Downloads: github.com

Kernel 5.10.259 with the ATi Rage 128 PRO AGP 4X:

[xeno74]

I have released the stable long-term kernel 5.10.260 with some legacy DRM drivers (3dfx, Matrox, and ATi) today.

Download and further information: github.com

[xeno74]

I’ve discovered, whilst working with Yellow Dog Linux, that we still need the dpaa-v2.patch patch for the stable long-term kernel 5.10. So I’ll be releasing an additional patched uImage 5.10.260.

[xeno74]

Hi All,

I released the RC3 of kernel 7.2 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs) today.

Download and further information: github.com



Please test the kernels.

Thanks,
Christian

[xeno74]

We are currently testing a new patch for the DPAA Ethernet.

Further information: github.com

I don't see any differences. Switching between 100Mbit/s and 1Gbit/s works without any problems.

Code: Select all

[ 1692.006428] fsl_dpaa_mac ffe4e8000.ethernet eth0: PHY [mdio@ffe4e1120:03] driver [Micrel KSZ9021 Gigabit PHY] (irq=POLL)
[ 1692.006448] fsl_dpaa_mac ffe4e8000.ethernet eth0: configuring for phy/rgmii link mode
[ 1692.021436] fsl_dpaa_mac ffe5e8000.ethernet eth2: PHY [mdio@ffe4e1120:07] driver [Micrel KSZ9021 Gigabit PHY] (irq=POLL)
[ 1692.021456] fsl_dpaa_mac ffe5e8000.ethernet eth2: configuring for phy/rgmii link mode
[ 1695.057699] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 2148.681140] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Down
[ 2149.704534] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 2199.875179] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Down
[ 2201.923103] fsl_dpaa_mac ffe4e8000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

[xeno74]

Hi All,

Here is the RC4 of kernel 7.2 with MATROX MGA-G200 support for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).

Download and further information: github.com



Please test the kernels.

Thanks,
Christian

[xeno74]

Hi All,

I have released the RC5 of kernel 7.2 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).

Download and further information: github.com



Please test the kernels.

Thanks,
Christian

[xeno74]

Hi All,

I have released the stable long-term kernel 5.10.261 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).

Download and further information: github.com



Cheers,
Christian

[Skateman]

Kernel 7.2 RC5 up and running on my MintPPC Mirari



Big picture https://www.skateman.nl/wp-content/uplo ... -31-03.png

[xeno74]

Kernel 7.2 RC5 up and running on my MintPPC Mirari

Skateman is back!!!!! Thank you for testing!