Spectre660's Linux downloads for the Sam440/460

[Spectre660]

The problem seems to be at the kernel level.
For some reason the Sams fail a test called a ring test so the hardware acceleration is disabled.
Any possible fix is way above my level.........

Dear spectre

What has to be done to enable 3d acceleration on sam460 - radeonhd setup ?

[javierdlr]

Sam460ex 3.15.0-rc1 kernel for testing.

https://dl.dropboxusercontent.com/u/542 ... rc1.config

Erm, you uploaded the .CONFIG not the kernel archive.

https://dl.dropboxusercontent.com/u/542 ... rc1.tar.gz

[javierdlr]

The problem seems to be at the kernel level.
For some reason the Sams fail a test called a ring test so the hardware acceleration is disabled.
Any possible fix is way above my level.........
...

Maybe xeno74 can help a little, as he prepear X1000 linux kernels

xeno74: do you have any idea/path we can follow to add (or check) 3d accel on our little SAMs? TIA

[Spectre660]

Sorry .

Corrected link in original post

Sam460ex 3.15.0-rc1 kernel for testing.

https://dl.dropboxusercontent.com/u/542 ... rc1.config

Erm, you uploaded the .CONFIG not the kernel archive.

https://dl.dropboxusercontent.com/u/542 ... rc1.tar.gz

[xeno74]

Maybe xeno74 can help a little, as he prepear X1000 linux kernels

xeno74: do you have any idea/path we can follow to add (or check) 3d accel on our little SAMs? TIA

I'm sorry, I'm not an expert in Sam Linux kernels.

@Spectre660:

Thanks a lot for the RC 1. I've uploaded them.



Downloads:

Kernel 3.15.0-rc1 for the Sam440ep( Flex): Sam440ep-3.15.0-rc1.tar.gz
Kernel 3.15.0-rc1 for the Sam460ex( Lite): Sam460ex-3.15.0-rc1.tar.gz

[javierdlr]

...
I'm sorry, I'm not an expert in Sam Linux kernels.

@Spectre660:

Thanks a lot for the RC 1. I've uploaded them.

But maybe point where to look in kernel/radeon_driver sources or .config or what did you change on X1000 kernel (if not closed source,NDAs,..) or if there is some kind of "ring test" code/exec to see what fails on SAMs.

TIA

[xeno74]

But maybe point where to look in kernel/radeon_driver sources or .config or what did you change on X1000 kernel (if not closed source,NDAs,..) or if there is some kind of "ring test" code/exec to see what fails on SAMs.

TIA

You could look in our patch file and config file if you like.

nemo_3.14-2.patch.tar.bz2

(7.51 KiB) Downloaded 425 times

nemo_3.14.0.config.tar.bz2

(15.53 KiB) Downloaded 484 times

[Spectre660]

Start here.
http://lists.freedesktop.org/archives/d ... 45050.html

[Spectre660]

Sam440ep 3.14.1 kernel

https://dl.dropboxusercontent.com/u/542 ... 4.1.tar.gz

[Spectre660]

Untested Sam460ex 3.14.1 Kernel

https://dl.dropboxusercontent.com/u/542 ... 4.1.tar.gz