Linux 3.5.7 and Nvidia QuatroFX 1400 ?

AmigaOne X1000 platform specific issues related to Linux only.
Post Reply
User avatar
zappa2009
Posts: 230
Joined: Tue Jun 21, 2011 12:17 pm

Linux 3.5.7 and Nvidia QuatroFX 1400 ?

Post by zappa2009 »

Hi a Friend of mine gave me a Gift in Form of a Nvidia-QuattroFX 1400 PCI-Express SingelSlot.

Any Change to get it Running with LinuxPPC with Kernel 3.5.7 ?
Not for permanent only temp to make some Tests with Supertuxkart0.8

Or can I use its beside my RadeonHD5450 at the same time in my X1000.

RadeonHD with OS4.1.6 and Nvidia with LinuxPPC ?

Good Idea or Bad Idea ?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9

daz
Beta Tester
Beta Tester
Posts: 318
Joined: Tue Dec 21, 2010 7:32 pm

Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?

Post by daz »

zappa2009 wrote:Hi a Friend of mine gave me a Gift in Form of a Nvidia-QuattroFX 1400 PCI-Express SingelSlot.

Any Change to get it Running with LinuxPPC with Kernel 3.5.7 ?
Not for permanent only temp to make some Tests with Supertuxkart0.8
Compile a kernel with the nouveau KMS in, either as a module or built in. Pat supplied all the xorg.deivers as I recall. You may need to look up about 2 graphics card setups.

There are a couple of people here who can build you a kernel if it would help.

I'd put the card in slot 3 (see below)
Or can I use its beside my RadeonHD5450 at the same time in my X1000.
I don't see why not, but may need a bit of setting up.
RadeonHD with OS4.1.6 and Nvidia with LinuxPPC ?
Distinctly possible! But I've no experience -you'd be mostly on your own.
Good Idea or Bad Idea ?
Worth a try I think...

Regards
Darren

User avatar
zappa2009
Posts: 230
Joined: Tue Jun 21, 2011 12:17 pm

Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?

Post by zappa2009 »

Ok i try it.

I hope it would work ;)
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9

User avatar
zappa2009
Posts: 230
Joined: Tue Jun 21, 2011 12:17 pm

Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?

Post by zappa2009 »

Oh i see Xen074 has build a new Kernel and he will help me with the Nvidea-Nouvau and xHCI .

Sounds cool ;)
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9

User avatar
xeno74
Posts: 6175
Joined: Fri Mar 23, 2012 7:58 am

Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?

Post by xeno74 »

zappa2009 wrote:Oh i see Xen074 has build a new Kernel and he will help me with the Nvidea-Nouvau and xHCI .

Sounds cool ;)
Yes that's right. I have finished with building the new kernel. I have compiled the Nvidia driver and USB 3 driver into the kernel. You don't need a new kernel modules directory (/lib/modules/3.8.7X1000) :)

Download: vmlinux-3.8.7x1000-usb3-nouveau.tar.gz

Have a lot of fun with your new kernel.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.

User avatar
zappa2009
Posts: 230
Joined: Tue Jun 21, 2011 12:17 pm

Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?

Post by zappa2009 »

Thanks Xeno74 !

USB3 works.
But with both Graphics Nvidia and Radeon The Monitor connect on DVI-1 on my Nvidia CFE come not up.
Also no DVI-Output (both DVI-1 and DVI-2) with Nvidea alone. Serial debug at starting and then hangs. I tried both DVI-1 and DVI-2 on the Nvidia.
Connect i the Monotor to back to Radeon -> CFE shows up but no 3D working under Linux. AmigaOS4.1.6 are running fine Ranger see the Nvidea ;)

Hm but it was a try. I stay with my RadeonHD 5450

But anyway USB3 works and this is more important as the old and louder Nvidea ;)
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9

Post Reply