Hyperion Entertainment Message Boards

I'm also a happy owner of an AmigaOne X1000 as it finally arrived a few week ago

Sadly time is limited but the first impression is very good!
Feels very solid and quite snappier than my old PegII G3

A big thanks to everyone involved in this project as well as everyone working with AmigaOS!

The non-working (in OS4.1) card was sold a couple of months ago... no need for a spare CSPPC
So no more help needed regarding this topic from m side...

I've officially given up now...it just won't work with OS4.x..
Oh well... luckily my main card works fine

Terminator - CSPPC - UWSCSI HDD (with termpwr on) - Terminator

I've tried three different cables and four different terminators (all working fine with my main CSPPC) but none will work with OS4.1 on this card...
I've also tried four different firmwares on the CSPPC too... v44.57, v44.67, v44.69 and ...

EDIT: Removed info telling you to check the ROM settings as you already said they are identical ;) Note to self: read entire thread first..

However if the RAM on the two boards is not identical then you might need less aggressive RAM settings in the BIOS - 70ns (already set) with extra waitstates ...

I've read the FAQ and as the same HDD works fine with my main CSPPC it's a bit weird...

But i guess i could try with a different HDD and do a clean install.. not that I think it would help but it's worth a try...

My main CSPPC (330Mhz+060) works just fine... it boots OS3.9 and OS4.1 as it should and works great.

Then if I replace that CSPPC with my spare (200MHz+060), still in the same A4000 with same HDD, cables, zorro/PCI cards etc. It's only the CSPPC that's been replaced.
It boots OS3.9 just fine and ...

I was testing my spare CSPPC today (a 200MHz + 060) with OS4.1 Classic (Gold and Update4).
But I can't seem to boot OS4.1 from my SCSI HDD connected to the CSPPC.
At cold boot it loads the OS4.1 kernel etc just fine and then reboots.
But after the reboot it can't find anything on the SCSI-chain ...