Still have graphics corruption with new Radeon Driver
Posted: Thu Apr 04, 2013 9:30 pm
When I first received my X1000, I reported minor graphics corruption with my HD5450 graphics card. I was told that Hans had solved the problem and that the new driver was in beta testing. I was advised to wait for the update before buying a different graphics card. At Amigans.net I saw that a new driver was available at A-EON's WEB site and that the driver would be released as v1. I D/L the new driver and it doesn't fix my graphics glitches. Am I correct in assuming that I will need to replace the graphics card to get rid of the graphics glitches?
Here are some of the problems I reported initially and still exist with the new driver:
1. On the "Early Startup Control" screen at the bottom of the "Select Boot Drive Lister", the up and down arrows are always missing or replaced with a rectangular block of blue. I've never seen this on my other OS4 hardware.
2. The PPaint screen has colored spots left in the paint area when I move the pointer around without pressing any buttons. This doesn't occur on my SAM or uA1.
3. In the Dopus4 configuration window on the System/Clocks page, the "Clock/Memory bar ..." checkmark blocks have small blue horizontal bars which shouldn't be there. As with the other problems, they don't occur on my SAM or uA1.
Here are some of the problems I reported initially and still exist with the new driver:
1. On the "Early Startup Control" screen at the bottom of the "Select Boot Drive Lister", the up and down arrows are always missing or replaced with a rectangular block of blue. I've never seen this on my other OS4 hardware.
2. The PPaint screen has colored spots left in the paint area when I move the pointer around without pressing any buttons. This doesn't occur on my SAM or uA1.
3. In the Dopus4 configuration window on the System/Clocks page, the "Clock/Memory bar ..." checkmark blocks have small blue horizontal bars which shouldn't be there. As with the other problems, they don't occur on my SAM or uA1.
