Hyperion Entertainment Message Boards

my a1g3se has u-boot version 1.1.4 , march 16 2006, 12:23:46
I don't know who made it, changed it, is it the latest for my machine?
which version do you have? which date? please specify board type too
thanx

The latest U-Boot for all Boards is 1.1.1, you can find it at Hyperions download site.
1.1.4 is beta software and was never released by Hyperion - one of the betatesters must have installed it on your board.
There are no known problems with it, but it can boot from a new sata controller (sii3114 ? ).
Just leave it there.

ZeroG wrote:The latest U-Boot for all Boards is 1.1.1, you can find it at Hyperions download site.
1.1.4 is beta software and was never released by Hyperion - one of the betatesters must have installed it on your board.
There are no known problems with it, but it can boot from a new sata controller (sii3114 ? ).
Just leave it there.

Aye, I only installed it cause it has a cool, AmigaOS logo instead of uboot writing, .

Christopher Follett wrote: Aye, I only installed it cause it has a cool, AmigaOS logo instead of uboot writing, .

mine has no Amiga logo!
I bought my board from Amiga Center in France, only the board no CDs in bundle, not even the battery

satiropan wrote:

Christopher Follett wrote: Aye, I only installed it cause it has a cool, AmigaOS logo instead of uboot writing, .

mine has no Amiga logo!
I bought my board from Amiga Center in France, only the board no CDs in bundle, not even the battery

It was never released. Due to issues already mentioned and was abandoned.

So, does this mean it's possible to replace the uboot output with an image like the x1000 have?
And does this apply to only the A1's or the sam series aswell?

It was only the AmigaOnes. The version in question was generated in 2007, so is six years old. Since the binary was not released, you can't flash a chip with it. There really is no advantage to it except for the ability to boot sii311x devices, but even that was at the expense of something else (I've forgotten now).

tonyw wrote:It was only the AmigaOnes. The version in question was generated in 2007, so is six years old. Since the binary was not released, you can't flash a chip with it. There really is no advantage to it except for the ability to boot sii311x devices, but even that was at the expense of something else (I've forgotten now).

I can boot from 311x devices, I tested both 3112 and 3114, do you mean uboot 1.1.1 canot boot from a 311x device? always in amigaone enviroment of course

satiropan wrote:I can boot from 311x devices, I tested both 3112 and 3114, do you mean uboot 1.1.1 canot boot from a 311x device? always in amigaone enviroment of course

U-Boot 1.1.1 can boot from sii3112 but IIRC not sii3114. I guess sii3114 is what was added.