Page 76 of 139
Re: New kernels
Posted: Sat Jul 20, 2024 7:05 pm
by Hypex
So have tested 6.10 final as well as 6.11 alpha 1 and alpha2. 6.10 final works well. 6.11 alpha1 worked well. 6.11 alpha2 works but seems sluggish with one CPU core running at least 60% on desktop. Memory under 1GB. Somehow I have no swap though thought I had setup a swap partition.
Re: New kernels
Posted: Sun Jul 21, 2024 7:06 am
by xeno74
Hypex wrote: Sat Jul 20, 2024 7:05 pm
So have tested 6.10 final as well as 6.11 alpha 1 and alpha2. 6.10 final works well. 6.11 alpha1 worked well. 6.11 alpha2 works but seems sluggish with one CPU core running at least 60% on desktop.
….
Mmmmmhhh 60% on one CPU core … We have to keep an eye on that. Thank you for testing.
Re: New kernels
Posted: Sun Jul 21, 2024 5:30 pm
by xeno74
Hi All,
Here is the
alpha3 of kernel
6.11 for the X1000 and X5000.
Download and further information:
github.com
Alternative download link:
linux-image-6.11-alpha3-X1000_X5000.tar.gz
Please test the kernels.
Thanks,
Christian
Re: New kernels
Posted: Mon Jul 22, 2024 5:56 am
by xeno74
I tested the
alpha3 of kernel
6.11 in a virtual e5500 QEMU machine yesterday:
Please test the
alpha3.
Thanks
Re: New kernels
Posted: Mon Jul 22, 2024 10:11 am
by musa
Hi
Debian trixie/sid 64 boot with vmlinux-6.11_alpha 2
Have a nice day
Re: New kernels
Posted: Mon Jul 22, 2024 10:29 am
by musa
Hi
Debian trixie/sid 32 boot with vmlinux-6.11_a3
have a nice day
Re: New kernels
Posted: Mon Jul 22, 2024 11:08 am
by xeno74
musa wrote: Mon Jul 22, 2024 10:29 am
Hi
Debian trixie/sid 32 boot with vmlinux-6.11_a3
have a nice day
Great! Thanks a lot for testing!
Re: New kernels
Posted: Mon Jul 22, 2024 11:35 am
by xeno74
Musa,
Many thanks for the outputs of the htops (alpha2 and alpha3).
Htop is great!
Have a nice day too!
Cheers,
Christian
Re: New kernels
Posted: Mon Jul 22, 2024 7:55 pm
by Hypex
xeno74 wrote: Sun Jul 21, 2024 7:06 am
Mmmmmhhh 60% on one CPU core … We have to keep an eye on that. Thank you for testing.
It appears to be doing some load balancing by switching cores about every ten seconds. Except for the monitor nothing else showed a high load.
I also tested alpha3 on my X1000. But I couldn't get to boot. Kernel prints to OF then stops. Will test with debug option. May need to serial debug this one.
Re: New kernels
Posted: Mon Jul 22, 2024 8:22 pm
by xeno74
Hypex wrote: Mon Jul 22, 2024 7:55 pm
I also tested alpha3 on my X1000. But I couldn't get to boot. Kernel prints to OF then stops. Will test with debug option. May need to serial debug this one.
Strange, that it doesn't boot because it boots on Musa's X1000.
Thank you for testing.
