Page 8 of 11
Re: Kernel 5.7
Posted: Sun May 17, 2020 11:38 am
by xeno74
Skateman wrote: Sun May 17, 2020 8:52 am
Kernel 5.7 RC5-2 up and running on my X5000 Fienix installation.
Shutdown is working for me with Darren`s DTB file.
Many thanks for testing!

Re: Kernel 5.7
Posted: Mon May 18, 2020 3:31 pm
by xeno74
Hi All,
Here is the
RC6 of kernel
5.7 for testing.
New:
Download:
linux-image-5.7-rc6-X1000_X5000.tar.gz
Please test the kernels.
Thanks,
Christian
Re: Kernel 5.7
Posted: Tue May 19, 2020 12:34 pm
by acefnq
Christian
K5.7 RC6 up and running but would not boot with included dtb. I use this one cyrus_p5020_eth_poweroff.dtb but it does not turn the power off, it shuts down the distro though.
Thanks
ace
Re: Kernel 5.7
Posted: Tue May 19, 2020 1:12 pm
by xeno74
acefnq wrote: Tue May 19, 2020 12:34 pm
Christian
K5.7 RC6 up and running but would not boot with included dtb. I use this one cyrus_p5020_eth_poweroff.dtb but it does not turn the power off, it shuts down the distro though.
Thanks
ace
Hi Ace,
Many thanks for testing the RC6!

Did you test it with the new dtb file
"cyrus-p5020.dtb" from the folder
"X5000_and_QEMU_e5500/dtbs/X5000_20/"? The behaviour of the cyrus_p5020_eth_poweroff.dtb is normal because the kernel was updated for the new dtb file
"cyrus-p5020.dtb" about 3 weeks ago. Please use the new
"cyrus-p5020.dtb" instead of the old dtb file.
Thanks,
Christian
Re: Kernel 5.7
Posted: Tue May 19, 2020 2:26 pm
by acefnq
Christian
Yes I tried that dtb first but the system would not boot so I reverted to the other.
cheers
ace
Re: Kernel 5.7
Posted: Tue May 19, 2020 3:29 pm
by xeno74
acefnq wrote: Tue May 19, 2020 2:26 pm
Christian
Yes I tried that dtb first but the system would not boot so I reverted to the other.
cheers
ace
Have you seen any error messages?
Re: Kernel 5.7
Posted: Tue May 19, 2020 10:22 pm
by Skateman
Kernel 5.7 RC6 up and running on my AmigaOne X5000
Big picture
http://www.skateman.nl/wp-content/uploa ... -14-42.png
No issues with the shutdown over here!
Re: Kernel 5.7
Posted: Wed May 20, 2020 12:41 am
by xeno74
Skateman wrote: Tue May 19, 2020 10:22 pm
Kernel 5.7 RC6 up and running on my AmigaOne X5000
No issues with the shutdown over here!
Hi Skateman,
Many thanks for testing the RC6!

Strange thing with the new dtb file and the shutdown. It works with your and my X5000 but not with Ace's X5000.
Cheers,
Christian
Re: Kernel 5.7
Posted: Wed May 20, 2020 2:28 pm
by acefnq
Skateman
Does your X5000 boot with the included dtb of 5.7 RC6?
ace
Re: Kernel 5.7
Posted: Wed May 20, 2020 8:55 pm
by Skateman
Hi Ace,
No problem here with booting.....
Weird issue... does you system crash.. or does not boot at all??