Hyperion Entertainment Message Boards

Thanks for testing .

The installer needs the certain modules embedded in the ramdisk. So it wont work properly with another kernel version.
I will try to do a new Sam460ex iso for netinstall soon. may include the DVD install option on the same iso too .

seventhwonder wrote:

Sam460ex 4.0.0 kernels

4.0.0-a works with my Sam460 + R7 265 + Ubunto 14.04.2 LTS

However when I tried it to use kernel for Debian Jessie install, nothing happens after selecting it from menu.lst
Nothing in serial...

Is this kernel not compatible with install ramdisk ?

@seventhwonder

You can try this netinstall iso (no need to download the Debian Jessie install DVD).

https://dl.dropboxusercontent.com/u/542 ... ssie-3.iso

New configuration of Sam460ex 4.0.0 kernel .(Mirror's the cards supported by the AmigaOS Warp3DS-SI driver)
So Cape Verde,Pitcairn/Curacao and Tahiti based cards .
* Radeon HD 7750-7970 series graphics card (excluding the Radeon HD 7790)
* Radeon R7 250X/265 (excluding R7 250)
* Radeon R9 270/270X/280/280X

https://dl.dropboxusercontent.com/u/542 ... ge-4.0.0-c

Hi, tested Sam460ex + RadeonHD6570 kernel_4.0.0-a with Debian Jessie, works/boots fine

BTW the radeon fw archive , should I update my debian with such? Or is it integrated on latest kernel 4.0.0-a?

TIA

Thanks for testing.

The updated Radeon Firmware is only required when using the generic version of the kernel for the Southern islands cards.(from kernel 3.17 and up) The other versions have their correct firmware version built in .
The generic kernel is what any new installer will install and the installer will also install the updated firmware
so it should not affect any Sam460ex user .
Someone trying a Southern Islands card on a Sam440ep needs to update the firmware and try either the 3.18.x or 3.19.x or 4.0.0.0 kernel versions. Have not had any feedback on the Sam440ep's and these versions yet though.

javierdlr wrote:Hi, tested Sam460ex + RadeonHD6570 kernel_4.0.0-a with Debian Jessie, works/boots fine

BTW the radeon fw archive , should I update my debian with such? Or is it integrated on latest kernel 4.0.0-a?

TIA

Spectre660 wrote:@seventhwonder

You can try this netinstall iso (no need to download the Debian Jessie install DVD).

https://dl.dropboxusercontent.com/u/542 ... ssie-3.iso

Hi Spectre, I have tried this version, but nothing happens after

"We should boot..... "

in uboot screen...

You should get beyond that
I just re tested it by burning the .iso to a cd-rw and it boots ok for me (Radeon HD 7750) .
Sounds like either a corrupted download of the .iso or a DVD drive read/write issue.
You have not reached the stage were the graphics card would normally be an issue .
If you have your old card you could try with it to eliminate your new card being an issue though.

seventhwonder wrote:

Spectre660 wrote:@seventhwonder

You can try this netinstall iso (no need to download the Debian Jessie install DVD).

https://dl.dropboxusercontent.com/u/542 ... ssie-3.iso

Hi Spectre, I have tried this version, but nothing happens after

"We should boot..... "

in uboot screen...

Spectre660 wrote:Thanks for testing.

The updated Radeon Firmware is only required when using the generic version of the kernel for the Southern islands cards.(from kernel 3.17 and up) The other versions have their correct firmware version built in .

OK THX for explanation.

New Sam460ex Debian 8 (Jessie) net installer .
Now works with Radeon HD 7000 series video cards .Tested with a Radeon HD 7750
Should also work with Radeon R7 and R9 cards (Untested)

https://dl.dropboxusercontent.com/u/542 ... ssie-3.iso

Spectre660 wrote:New Sam460ex Debian 8 (Jessie) net installer .
Now works with Radeon HD 7000 series video cards .Tested with a Radeon HD 7750
Should also work with Radeon R7 and R9 cards (Untested)

https://dl.dropboxusercontent.com/u/542 ... ssie-3.iso

Shall I upload it? Or shall I wait because of testing?