Support Forum
https://forum.hyperion-entertainment.com/
https://forum.hyperion-entertainment.com/viewtopic.php?t=4200
Its start with some lag and 2 to 3 min. after it break down.xeno74 wrote:Musa,
Does SuperTuxKart work?
Cheers,
Christian
Hi Christian,xeno74 wrote:
Please post the output of dmesg if you run Fienix. Maybe there are some messages about your CF card in the dmesg output.
Code: Select all
[ 0.000000] hash-mmu: Page sizes from device-tree:
[ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
[ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=3
[ 0.000000] hash-mmu: base_shift=20: shift=20, sllp=0x0030, avpnm=0x00000000, tlbiel=0, penc=31
[ 0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12
[ 0.000000] Using 1TB segments
[ 0.000000] hash-mmu: Initializing hash mmu with SLB
[ 0.000000] Linux version 4.19.3_A-EON_AmigaOne_X1000_Nemo (christian@AmigaoneX1000) (gcc version 6.3.0 20170618 (Debian 6.3.0-19)) #1 SMP Thu Nov 22 06:53:32 CET 2018
[ 0.000000] IOBMAP L2 allocated at: (____ptrval____)
[ 0.000000] Using A-EON Amigaone X1000 machine description
[ 0.000000] Found legacy serial port 0 for /pxp@0,e0000000/serial@1d
[ 0.000000] port=7f03f8, taddr=fcff03f8, irq=0, clk=133333333, speed=115200
[ 0.000000] Found legacy serial port 1 for /pxp@0,e0000000/serial@1d,1
[ 0.000000] port=7f02f8, taddr=fcff02f8, irq=0, clk=133333333, speed=115200
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Allocated 2192 bytes for 2 pacas
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] phys_mem_size = 0x100000000
[ 0.000000] dcache_bsize = 0x40
[ 0.000000] icache_bsize = 0x40
[ 0.000000] cpu_features = 0x00000100004011a2
[ 0.000000] possible = 0x0000fbefffffb1af
[ 0.000000] always = 0x00000000000001a0
[ 0.000000] cpu_user_features = 0xdc000802 0x00000000
[ 0.000000] mmu_features = 0x6e000001
[ 0.000000] firmware_features = 0x0000000000000000
[ 0.000000] htab_address = 0x(____ptrval____)
[ 0.000000] htab_hash_mask = 0x7ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Found PA-PXP PCI host bridge.
[ 0.000000] PCI host bridge /pxp@0,e0000000 (primary) ranges:
[ 0.000000] IO 0x00000000fc800000..0x00000000fcffffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x00000000e00fffff -> 0x0000000080000000
[ 0.000000] MEM 0x00000000fd800000..0x00000000fd800fff -> 0x00000000fd800000
[ 0.000000] MEM 0x0000080000000000..0x00000bffffffffff -> 0x0000080000000000
[ 0.000000] no ISA IO ranges or unexpected isa range, mapping 64k
[ 0.000000] ISA bridge (early) is /pxp@0,e0000000/io-bridge@0
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] barrier-nospec: patched 570 locations
[ 0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] DMA zone: 21504 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 1048576 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 27 pages/cpu @(____ptrval____) s73240 r0 d37352 u524288
[ 0.000000] pcpu-alloc: s73240 r0 d37352 u524288 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027072
[ 0.000000] Kernel command line: root=/dev/sdb6
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 4006360K/4194304K available (15504K kernel code, 2480K rwdata, 7104K rodata, 1004K init, 1600K bss, 187944K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 37818 entries in 223 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs
[ 0.000000] mpic: ISU size: 1024, shift: 10, mask: 3ff
[ 0.000000] mpic: Initializing for 1024 sources
[ 0.000000] i8259 legacy interrupt controller initialized
[ 0.000000] time_init: decrementer frequency = 66.666666 MHz
[ 0.000000] time_init: processor frequency = 1800.000000 MHz
[ 0.000004] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns
[ 0.000009] clocksource: timebase mult[f000003] shift[24] registered
[ 0.000013] clockevent: decrementer mult[1111110e] shift[32] cpu[0]
[ 0.000217] Console: colour dummy device 80x25
[ 0.000431] console [tty0] enabled
[ 0.000443] pid_max: default: 32768 minimum: 301
[ 0.000562] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.000596] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001055] mpic: requesting IPIs...
[ 0.001400] rcu: Hierarchical SRCU implementation.
[ 0.001654] smp: Bringing up secondary CPUs ...
[ 0.002106] smp: Brought up 1 node, 2 CPUs
[ 0.002295] Using standard scheduler topology
[ 0.002561] devtmpfs: initialized
[ 0.004478] random: get_random_u32 called from .bucket_table_alloc+0xa8/0x240 with crng_init=0
[ 0.004814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.004831] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.004932] xor: measuring software checksum speed
[ 0.014094] 8regs : 3380.000 MB/sec
[ 0.024121] 8regs_prefetch: 3112.000 MB/sec
[ 0.034148] 32regs : 3512.000 MB/sec
[ 0.044176] 32regs_prefetch: 3112.000 MB/sec
[ 0.054205] altivec : 5516.000 MB/sec
[ 0.054213] xor: using function: altivec (5516.000 MB/sec)
[ 0.054338] NET: Registered protocol family 16
[ 0.055793] PCI: Probing PCI hardware
[ 0.056043] PCI host bridge to bus 0000:00
[ 0.056058] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
[ 0.056070] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe00fffff]
[ 0.056078] pci_bus 0000:00: root bus resource [mem 0xfd800000-0xfd800fff]
[ 0.056086] pci_bus 0000:00: root bus resource [mem 0x80000000000-0xbffffffffff]
[ 0.056096] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.056106] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.056109] pci_bus 0000:00: scanning bus
[ 0.056133] NEMO SB600 IOB base e0000000
[ 0.056160] pci 0000:00:00.0: [1959:a001] type 00 class 0x060000
[ 0.056263] ISA bridge PCI attached: 0000:00:00.0
[ 0.056363] pci 0000:00:01.0: [1959:a009] type 00 class 0x058000
[ 0.056561] pci 0000:00:03.0: [1959:a00c] type 00 class 0x080080
[ 0.056731] pci 0000:00:04.0: [1959:a00a] type 00 class 0x050000
[ 0.056903] pci 0000:00:05.0: [1959:a00a] type 00 class 0x050000
[ 0.057126] pci 0000:00:08.0: [1959:a000] type 00 class 0x0b2000
[ 0.057302] pci 0000:00:09.0: [1959:a000] type 00 class 0x0b2000
[ 0.057590] pci 0000:00:10.0: [1959:a002] type 01 class 0x060400
[ 0.057619] pci 0000:00:10.0: enabling Extended Tags
[ 0.057658] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.057663] pci 0000:00:10.0: PME# disabled
[ 0.057797] pci 0000:00:10.1: [1959:a002] type 01 class 0x060400
[ 0.057826] pci 0000:00:10.1: enabling Extended Tags
[ 0.057863] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.057867] pci 0000:00:10.1: PME# disabled
[ 0.057998] pci 0000:00:10.2: [1959:a002] type 01 class 0x060400
[ 0.058026] pci 0000:00:10.2: enabling Extended Tags
[ 0.058062] pci 0000:00:10.2: PME# supported from D0 D3hot D3cold
[ 0.058067] pci 0000:00:10.2: PME# disabled
[ 0.058195] pci 0000:00:10.3: [1959:a002] type 01 class 0x060400
[ 0.058233] pci 0000:00:10.3: enabling Extended Tags
[ 0.058270] pci 0000:00:10.3: PME# supported from D0 D3hot D3cold
[ 0.058274] pci 0000:00:10.3: PME# disabled
[ 0.058429] pci 0000:00:11.0: [1959:a002] type 01 class 0x060400
[ 0.058457] pci 0000:00:11.0: enabling Extended Tags
[ 0.058494] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 0.058498] pci 0000:00:11.0: PME# disabled
[ 0.058629] pci 0000:00:11.1: [1959:a002] type 01 class 0x060400
[ 0.058657] pci 0000:00:11.1: enabling Extended Tags
[ 0.058694] pci 0000:00:11.1: PME# supported from D0 D3hot D3cold
[ 0.058698] pci 0000:00:11.1: PME# disabled
[ 0.058830] pci 0000:00:11.2: [1959:a002] type 01 class 0x060400
[ 0.058858] pci 0000:00:11.2: enabling Extended Tags
[ 0.058895] pci 0000:00:11.2: PME# supported from D0 D3hot D3cold
[ 0.058899] pci 0000:00:11.2: PME# disabled
[ 0.059030] pci 0000:00:11.3: [1959:a002] type 01 class 0x060400
[ 0.059058] pci 0000:00:11.3: enabling Extended Tags
[ 0.059093] pci 0000:00:11.3: PME# supported from D0 D3hot D3cold
[ 0.059098] pci 0000:00:11.3: PME# disabled
[ 0.059313] pci 0000:00:14.0: [1959:a005] type 00 class 0x020000
[ 0.059454] pci 0000:00:14.1: [1959:a005] type 00 class 0x020000
[ 0.059598] pci 0000:00:14.2: [1959:a005] type 00 class 0x020000
[ 0.059735] pci 0000:00:14.3: [1959:a005] type 00 class 0x020000
[ 0.059912] pci 0000:00:15.0: [1959:a006] type 00 class 0x020000
[ 0.060054] pci 0000:00:15.1: [1959:a006] type 00 class 0x020000
[ 0.060310] pci 0000:00:1a.0: [1959:a007] type 00 class 0x0801ff
[ 0.060490] pci 0000:00:1b.0: [1959:a00b] type 00 class 0x088000
[ 0.060670] pci 0000:00:1c.0: [1959:a003] type 00 class 0x0c0500
[ 0.060684] pci 0000:00:1c.0: reg 0x10: [io 0x800200-0x80023f]
[ 0.060823] pci 0000:00:1c.1: [1959:a003] type 00 class 0x0c0500
[ 0.060837] pci 0000:00:1c.1: reg 0x10: [io 0x800240-0x80027f]
[ 0.060975] pci 0000:00:1c.2: [1959:a003] type 00 class 0x0c0500
[ 0.060989] pci 0000:00:1c.2: reg 0x10: [io 0x800280-0x8002bf]
[ 0.061157] pci 0000:00:1d.0: [1959:a004] type 00 class 0x070003
[ 0.061170] pci 0000:00:1d.0: reg 0x10: [io 0x8003f8-0x8003ff]
[ 0.061324] pci 0000:00:1d.1: [1959:a004] type 00 class 0x070003
[ 0.061338] pci 0000:00:1d.1: reg 0x10: [io 0x8002f8-0x8002ff]
[ 0.061514] pci 0000:00:1e.0: [1959:a008] type 00 class 0x0601ff
[ 0.061528] pci 0000:00:1e.0: reg 0x10: [io 0x800400-0x8004ff]
[ 0.061536] pci 0000:00:1e.0: reg 0x14: [io 0x800500-0x8005ff]
[ 0.061706] pci_bus 0000:00: fixups for bus
[ 0.105428] IOMMU table initialized, virtual merging enabled
[ 0.105856] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.105991] pci_bus 0000:01: scanning bus
[ 0.106016] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
[ 0.106047] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.106060] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa003ffff 64bit]
[ 0.106069] pci 0000:01:00.0: reg 0x20: [io 0x12000-0x120ff]
[ 0.106083] pci 0000:01:00.0: reg 0x30: [mem 0xa0040000-0xa005ffff pref]
[ 0.106092] pci 0000:01:00.0: enabling Extended Tags
[ 0.106157] pci 0000:01:00.0: supports D1 D2
[ 0.106161] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.106166] pci 0000:01:00.0: PME# disabled
[ 0.106188] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:10.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.106345] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[ 0.106371] pci 0000:01:00.1: reg 0x10: [mem 0xa0060000-0xa0063fff 64bit]
[ 0.106404] pci 0000:01:00.1: enabling Extended Tags
[ 0.106469] pci 0000:01:00.1: supports D1 D2
[ 0.110147] pci_bus 0000:01: fixups for bus
[ 0.110152] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.110166] pci 0000:00:10.0: bridge window [io 0x12000-0x12fff]
[ 0.110171] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.110228] pci_bus 0000:01: bus scan returning with max=01
[ 0.110235] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 0
[ 0.110328] pci_bus 0000:02: scanning bus
[ 0.110989] pci_bus 0000:02: fixups for bus
[ 0.110993] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.111010] pci_bus 0000:02: bus scan returning with max=02
[ 0.111016] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 0
[ 0.111106] pci_bus 0000:03: scanning bus
[ 0.111764] pci_bus 0000:03: fixups for bus
[ 0.111769] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.111785] pci_bus 0000:03: bus scan returning with max=03
[ 0.111791] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 0
[ 0.111880] pci_bus 0000:04: scanning bus
[ 0.112537] pci_bus 0000:04: fixups for bus
[ 0.112542] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.112558] pci_bus 0000:04: bus scan returning with max=04
[ 0.112564] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 0
[ 0.112652] pci_bus 0000:05: scanning bus
[ 0.113048] pci 0000:05:12.0: [1002:4380] type 00 class 0x01018f
[ 0.113074] pci 0000:05:12.0: reg 0x10: [io 0x11040-0x11047]
[ 0.113085] pci 0000:05:12.0: reg 0x14: [io 0x1105c-0x1105f]
[ 0.113096] pci 0000:05:12.0: reg 0x18: [io 0x11048-0x1104f]
[ 0.113107] pci 0000:05:12.0: reg 0x1c: [io 0x11058-0x1105b]
[ 0.113118] pci 0000:05:12.0: reg 0x20: [io 0x11010-0x1101f]
[ 0.113129] pci 0000:05:12.0: reg 0x24: [mem 0xa0209400-0xa02097ff]
[ 0.113152] pci 0000:05:12.0: set SATA to AHCI mode
[ 0.113342] pci 0000:05:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.113364] pci 0000:05:13.0: reg 0x10: [mem 0xa0208000-0xa0208fff]
[ 0.113549] pci 0000:05:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.113570] pci 0000:05:13.1: reg 0x10: [mem 0xa0207000-0xa0207fff]
[ 0.113740] pci 0000:05:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.113762] pci 0000:05:13.2: reg 0x10: [mem 0xa0206000-0xa0206fff]
[ 0.113933] pci 0000:05:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.113955] pci 0000:05:13.3: reg 0x10: [mem 0xa0204000-0xa0204fff]
[ 0.114124] pci 0000:05:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.114146] pci 0000:05:13.4: reg 0x10: [mem 0xa0205000-0xa0205fff]
[ 0.114320] pci 0000:05:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.114345] pci 0000:05:13.5: reg 0x10: [mem 0xa0209800-0xa02098ff]
[ 0.114428] pci 0000:05:13.5: supports D1 D2
[ 0.114431] pci 0000:05:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.114436] pci 0000:05:13.5: PME# disabled
[ 0.114600] pci 0000:05:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.114620] pci 0000:05:14.0: reg 0x10: [io 0x11020-0x1102f]
[ 0.114631] pci 0000:05:14.0: reg 0x14: [mem 0xa0209000-0xa02093ff]
[ 0.114794] pci 0000:05:14.1: [1002:438c] type 00 class 0x010183
[ 0.114815] pci 0000:05:14.1: reg 0x10: [io 0x11030-0x11037]
[ 0.114826] pci 0000:05:14.1: reg 0x14: [io 0x11054-0x11057]
[ 0.114837] pci 0000:05:14.1: reg 0x18: [io 0x11038-0x1103f]
[ 0.114848] pci 0000:05:14.1: reg 0x1c: [io 0x11050-0x11053]
[ 0.114859] pci 0000:05:14.1: reg 0x20: [io 0x11000-0x1100f]
[ 0.114881] pci 0000:05:14.1: legacy IDE quirk: reg 0x18: [io 0x10170-0x10177]
[ 0.114892] pci 0000:05:14.1: legacy IDE quirk: reg 0x1c: [io 0x10376]
[ 0.115027] pci 0000:05:14.2: [1002:4383] type 00 class 0x040300
[ 0.115056] pci 0000:05:14.2: reg 0x10: [mem 0xa0200000-0xa0203fff 64bit]
[ 0.115125] pci 0000:05:14.2: PME# supported from D0 D3hot D3cold
[ 0.115130] pci 0000:05:14.2: PME# disabled
[ 0.115251] pci 0000:05:14.3: [1002:438d] type 00 class 0x060100
[ 0.115446] pci 0000:05:14.4: [1002:4384] type 01 class 0x060400
[ 0.115864] pci_bus 0000:05: fixups for bus
[ 0.115869] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.115882] pci 0000:00:11.0: bridge window [io 0x10000-0x13fff]
[ 0.115887] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.115942] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 0
[ 0.115957] pci_bus 0000:06: extended config space not accessible
[ 0.116035] pci_bus 0000:06: scanning bus
[ 0.116189] pci 0000:06:06.0: [10ec:8139] type 00 class 0x020000
[ 0.116213] pci 0000:06:06.0: reg 0x10: [io 0x13000-0x130ff]
[ 0.116227] pci 0000:06:06.0: reg 0x14: [mem 0xa0320000-0xa03200ff]
[ 0.116280] pci 0000:06:06.0: reg 0x30: [mem 0xa0300000-0xa031ffff pref]
[ 0.116321] pci 0000:06:06.0: supports D1 D2
[ 0.116324] pci 0000:06:06.0: PME# supported from D1 D2 D3hot
[ 0.116330] pci 0000:06:06.0: PME# disabled
[ 0.116994] pci_bus 0000:06: fixups for bus
[ 0.116998] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.117012] pci 0000:05:14.4: bridge window [io 0x13000-0x13fff]
[ 0.117018] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.117030] pci_bus 0000:06: bus scan returning with max=06
[ 0.117037] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 1
[ 0.117043] pci_bus 0000:05: bus scan returning with max=06
[ 0.117050] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 0
[ 0.117139] pci_bus 0000:07: scanning bus
[ 0.117790] pci_bus 0000:07: fixups for bus
[ 0.117795] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.117811] pci_bus 0000:07: bus scan returning with max=07
[ 0.117818] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 0
[ 0.117911] pci_bus 0000:08: scanning bus
[ 0.118550] pci_bus 0000:08: fixups for bus
[ 0.118554] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.118582] pci_bus 0000:08: bus scan returning with max=08
[ 0.118589] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 0
[ 0.118682] pci_bus 0000:09: scanning bus
[ 0.119319] pci_bus 0000:09: fixups for bus
[ 0.119324] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.119340] pci_bus 0000:09: bus scan returning with max=09
[ 0.119348] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.119355] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 1
[ 0.119361] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 1
[ 0.119367] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 1
[ 0.119374] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 1
[ 0.119380] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 1
[ 0.119386] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 1
[ 0.119393] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 1
[ 0.119398] pci_bus 0000:00: bus scan returning with max=09
[ 0.119404] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.119594] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
[ 0.119609] pci 0000:00:10.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.119636] pci 0000:00:11.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-06] add_size 200000 add_align 100000
[ 0.119645] pci 0000:00:11.1: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.119650] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[ 0.119656] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[ 0.119664] pci 0000:00:11.2: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.119670] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[ 0.119677] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[ 0.119685] pci 0000:00:11.3: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
[ 0.119691] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[ 0.119696] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000
[ 0.119723] pci 0000:00:10.0: BAR 9: assigned [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.119738] pci 0000:00:11.0: BAR 9: assigned [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.119749] pci 0000:00:11.1: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 0.119760] pci 0000:00:11.1: BAR 9: assigned [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.119771] pci 0000:00:11.2: BAR 8: assigned [mem 0x80200000-0x803fffff]
[ 0.119782] pci 0000:00:11.2: BAR 9: assigned [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.119792] pci 0000:00:11.3: BAR 8: assigned [mem 0x80400000-0x805fffff]
[ 0.119803] pci 0000:00:11.3: BAR 9: assigned [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.119813] pci 0000:00:11.1: BAR 7: assigned [io 0x14000-0x14fff]
[ 0.119823] pci 0000:00:11.2: BAR 7: assigned [io 0x15000-0x15fff]
[ 0.119832] pci 0000:00:11.3: BAR 7: assigned [io 0x16000-0x16fff]
[ 0.119846] pci 0000:00:10.0: PCI bridge to [bus 01]
[ 0.119855] pci 0000:00:10.0: bridge window [io 0x12000-0x12fff]
[ 0.119865] pci 0000:00:10.0: bridge window [mem 0x90000000-0xa00fffff]
[ 0.119874] pci 0000:00:10.0: bridge window [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.119885] pci 0000:00:10.1: PCI bridge to [bus 02]
[ 0.119896] pci 0000:00:10.2: PCI bridge to [bus 03]
[ 0.119907] pci 0000:00:10.3: PCI bridge to [bus 04]
[ 0.119922] pci 0000:05:14.4: PCI bridge to [bus 06]
[ 0.119931] pci 0000:05:14.4: bridge window [io 0x13000-0x13fff]
[ 0.119941] pci 0000:05:14.4: bridge window [mem 0xa0300000-0xa03fffff]
[ 0.119954] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[ 0.119963] pci 0000:00:11.0: bridge window [io 0x10000-0x13fff]
[ 0.119972] pci 0000:00:11.0: bridge window [mem 0xa0100000-0xa03fffff]
[ 0.119981] pci 0000:00:11.0: bridge window [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.119992] pci 0000:00:11.1: PCI bridge to [bus 07]
[ 0.120000] pci 0000:00:11.1: bridge window [io 0x14000-0x14fff]
[ 0.120009] pci 0000:00:11.1: bridge window [mem 0x80000000-0x801fffff]
[ 0.120018] pci 0000:00:11.1: bridge window [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.120029] pci 0000:00:11.2: PCI bridge to [bus 08]
[ 0.120037] pci 0000:00:11.2: bridge window [io 0x15000-0x15fff]
[ 0.120046] pci 0000:00:11.2: bridge window [mem 0x80200000-0x803fffff]
[ 0.120055] pci 0000:00:11.2: bridge window [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.120066] pci 0000:00:11.3: PCI bridge to [bus 09]
[ 0.120074] pci 0000:00:11.3: bridge window [io 0x16000-0x16fff]
[ 0.120083] pci 0000:00:11.3: bridge window [mem 0x80400000-0x805fffff]
[ 0.120092] pci 0000:00:11.3: bridge window [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.120107] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff]
[ 0.120111] pci_bus 0000:00: resource 5 [mem 0x80000000-0xe00fffff]
[ 0.120115] pci_bus 0000:00: resource 6 [mem 0xfd800000-0xfd800fff]
[ 0.120119] pci_bus 0000:00: resource 7 [mem 0x80000000000-0xbffffffffff]
[ 0.120123] pci_bus 0000:01: resource 0 [io 0x12000-0x12fff]
[ 0.120126] pci_bus 0000:01: resource 1 [mem 0x90000000-0xa00fffff]
[ 0.120131] pci_bus 0000:01: resource 2 [mem 0x80000000000-0x800001fffff 64bit pref]
[ 0.120135] pci_bus 0000:05: resource 0 [io 0x10000-0x13fff]
[ 0.120139] pci_bus 0000:05: resource 1 [mem 0xa0100000-0xa03fffff]
[ 0.120143] pci_bus 0000:05: resource 2 [mem 0x80000200000-0x800003fffff 64bit pref]
[ 0.120147] pci_bus 0000:06: resource 0 [io 0x13000-0x13fff]
[ 0.120151] pci_bus 0000:06: resource 1 [mem 0xa0300000-0xa03fffff]
[ 0.120155] pci_bus 0000:07: resource 0 [io 0x14000-0x14fff]
[ 0.120158] pci_bus 0000:07: resource 1 [mem 0x80000000-0x801fffff]
[ 0.120162] pci_bus 0000:07: resource 2 [mem 0x80000400000-0x800005fffff 64bit pref]
[ 0.120166] pci_bus 0000:08: resource 0 [io 0x15000-0x15fff]
[ 0.120170] pci_bus 0000:08: resource 1 [mem 0x80200000-0x803fffff]
[ 0.120174] pci_bus 0000:08: resource 2 [mem 0x80000600000-0x800007fffff 64bit pref]
[ 0.120178] pci_bus 0000:09: resource 0 [io 0x16000-0x16fff]
[ 0.120181] pci_bus 0000:09: resource 1 [mem 0x80400000-0x805fffff]
[ 0.120185] pci_bus 0000:09: resource 2 [mem 0x80000800000-0x800009fffff 64bit pref]
[ 0.120188] PCI: Probing PCI hardware done
[ 0.144075] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages
[ 0.160826] raid6: altivecx1 gen() 2511 MB/s
[ 0.177886] raid6: altivecx2 gen() 3085 MB/s
[ 0.194970] raid6: altivecx4 gen() 3582 MB/s
[ 0.212029] raid6: altivecx8 gen() 3601 MB/s
[ 0.229120] raid6: int64x1 gen() 1019 MB/s
[ 0.246146] raid6: int64x1 xor() 490 MB/s
[ 0.263241] raid6: int64x2 gen() 1664 MB/s
[ 0.280281] raid6: int64x2 xor() 902 MB/s
[ 0.297337] raid6: int64x4 gen() 1941 MB/s
[ 0.314411] raid6: int64x4 xor() 1166 MB/s
[ 0.331494] raid6: int64x8 gen() 1394 MB/s
[ 0.348523] raid6: int64x8 xor() 1072 MB/s
[ 0.348529] raid6: using algorithm altivecx8 gen() 3601 MB/s
[ 0.348535] raid6: using intx1 recovery algorithm
[ 0.348960] SCSI subsystem initialized
[ 0.349194] libata version 3.00 loaded.
[ 0.349563] usbcore: registered new interface driver usbfs
[ 0.349639] usbcore: registered new interface driver hub
[ 0.349685] usbcore: registered new device driver usb
[ 0.350075] EDAC MC: Ver: 3.0.0
[ 0.350708] Advanced Linux Sound Architecture Driver Initialized.
[ 0.351285] clocksource: Switched to clocksource timebase
[ 0.387539] NET: Registered protocol family 2
[ 0.387839] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.387876] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.388025] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.388250] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.388344] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.388398] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.388524] NET: Registered protocol family 1
[ 0.388735] RPC: Registered named UNIX socket transport module.
[ 0.388744] RPC: Registered udp transport module.
[ 0.388749] RPC: Registered tcp transport module.
[ 0.388755] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.389123] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.440315] pci 0000:05:13.0: .quirk_usb_early_handoff+0x0/0x9d0 took 49962 usecs
[ 0.492301] pci 0000:05:13.1: .quirk_usb_early_handoff+0x0/0x9d0 took 50745 usecs
[ 0.544304] pci 0000:05:13.2: .quirk_usb_early_handoff+0x0/0x9d0 took 50765 usecs
[ 0.596299] pci 0000:05:13.3: .quirk_usb_early_handoff+0x0/0x9d0 took 50756 usecs
[ 0.648301] pci 0000:05:13.4: .quirk_usb_early_handoff+0x0/0x9d0 took 50763 usecs
[ 0.648859] PCI: CLS 64 bytes, default 128
[ 0.650016] libphy: pasemi gpio mdio bus: probed
[ 0.650374] mdio_bus 0: MDIO device at address 0 is missing.
[ 0.650844] Initialise system trusted keyrings
[ 0.651089] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.651572] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.651870] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.651978] fuse init (API version 7.27)
[ 0.654788] Key type asymmetric registered
[ 0.654797] Asymmetric key parser 'x509' registered
[ 0.654829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.654838] io scheduler noop registered
[ 0.654844] io scheduler deadline registered
[ 0.654870] io scheduler cfq registered (default)
[ 0.654877] io scheduler mq-deadline registered
[ 0.654882] io scheduler kyber registered
[ 0.654910] io scheduler bfq registered
[ 0.655123] pcieport 0000:00:10.0: runtime IRQ mapping not provided by arch
[ 0.655356] pcieport 0000:00:10.1: runtime IRQ mapping not provided by arch
[ 0.655500] pcieport 0000:00:10.2: runtime IRQ mapping not provided by arch
[ 0.655643] pcieport 0000:00:10.3: runtime IRQ mapping not provided by arch
[ 0.655779] pcieport 0000:00:11.0: runtime IRQ mapping not provided by arch
[ 0.655977] pcieport 0000:00:11.1: runtime IRQ mapping not provided by arch
[ 0.656177] pcieport 0000:00:11.2: runtime IRQ mapping not provided by arch
[ 0.656397] pcieport 0000:00:11.3: runtime IRQ mapping not provided by arch
[ 0.656613] pcieport 0000:05:14.4: runtime IRQ mapping not provided by arch
[ 0.657201] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.677608] serial8250.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud = 8333333) is a 16550A
[ 0.697767] serial8250.0: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud = 8333333) is a 16550A
[ 0.698078] serial 0000:00:1d.0: runtime IRQ mapping not provided by arch
[ 0.718077] 0000:00:1d.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud = 8333333) is a 16550A
[ 0.718258] serial 0000:00:1d.1: runtime IRQ mapping not provided by arch
[ 0.738269] 0000:00:1d.1: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud = 8333333) is a 16550A
[ 0.738837] Registering PA Semi RNG
[ 0.738935] Linux agpgart interface v0.103
[ 0.739082] [drm] radeon kernel modesetting enabled.
[ 0.739202] radeon 0000:01:00.0: runtime IRQ mapping not provided by arch
[ 0.739532] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x174B:0xE208 0x00).
[ 0.910274] ATOM BIOS: Tahiti
[ 0.910360] [drm] Changing default dispclk from 500Mhz to 600Mhz
[ 0.910385] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
[ 0.910397] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
[ 0.910404] [drm] Detected VRAM RAM=3072M, BAR=256M
[ 0.910410] [drm] RAM width 384bits DDR
[ 0.910502] [TTM] Zone kernel: Available graphics memory: 2003690 kiB
[ 0.910512] [TTM] Initializing pool allocator
[ 0.910553] [drm] radeon: 3072M of VRAM memory ready
[ 0.910560] [drm] radeon: 2048M of GTT memory ready.
[ 0.910584] [drm] Loading tahiti Microcode
[ 0.910635] [drm] Internal thermal controller with fan control
[ 0.923208] [drm] radeon: dpm initialized
[ 0.924331] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 0.924356] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 0.929668] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 2.230606] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 2.230793] radeon 0000:01:00.0: WB enabled
[ 2.230804] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0x(____ptrval____)
[ 2.230816] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0x(____ptrval____)
[ 2.230829] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0x(____ptrval____)
[ 2.230841] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0x(____ptrval____)
[ 2.230853] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0x(____ptrval____)
[ 2.237582] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x(____ptrval____)
[ 2.260512] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0x(____ptrval____)
[ 2.260528] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0x(____ptrval____)
[ 2.260539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.260546] [drm] Driver supports precise vblank timestamp query.
[ 2.260553] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 2.260594] [drm] radeon: irq initialized.
[ 2.365060] [drm] ring test on 0 succeeded in 1 usecs
[ 2.365073] [drm] ring test on 1 succeeded in 1 usecs
[ 2.365082] [drm] ring test on 2 succeeded in 1 usecs
[ 2.365095] [drm] ring test on 3 succeeded in 3 usecs
[ 2.365108] [drm] ring test on 4 succeeded in 3 usecs
[ 2.550489] [drm] ring test on 5 succeeded in 2 usecs
[ 2.550499] [drm] UVD initialized successfully.
[ 2.659481] [drm] ring test on 6 succeeded in 32 usecs
[ 2.659499] [drm] ring test on 7 succeeded in 5 usecs
[ 2.659504] [drm] VCE initialized successfully.
[ 2.659882] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.659925] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2.659975] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2.660016] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.660054] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.829705] [drm] ib test on ring 5 succeeded
[ 3.330315] [drm] ib test on ring 6 succeeded
[ 3.834311] [drm] ib test on ring 7 succeeded
[ 3.835744] [drm] Radeon Display Connectors
[ 3.835753] [drm] Connector 0:
[ 3.835757] [drm] DP-1
[ 3.835761] [drm] HPD5
[ 3.835767] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 3.835773] [drm] Encoders:
[ 3.835777] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.835782] [drm] Connector 1:
[ 3.835786] [drm] DP-2
[ 3.835790] [drm] HPD4
[ 3.835796] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 3.835801] [drm] Encoders:
[ 3.835805] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.835810] [drm] Connector 2:
[ 3.835814] [drm] HDMI-A-1
[ 3.835818] [drm] HPD1
[ 3.835823] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 3.835829] [drm] Encoders:
[ 3.835833] [drm] DFP3: INTERNAL_UNIPHY1
[ 3.835838] [drm] Connector 3:
[ 3.835841] [drm] DVI-I-1
[ 3.835845] [drm] HPD3
[ 3.835851] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 3.835857] [drm] Encoders:
[ 3.835861] [drm] DFP4: INTERNAL_UNIPHY
[ 3.835865] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.048586] [drm] fb mappable at 0x905D8000
[ 4.048596] [drm] vram apper at 0x90000000
[ 4.048601] [drm] size 8294400
[ 4.048606] [drm] fb depth is 24
[ 4.048610] [drm] pitch is 7680
[ 4.149613] [drm:.si_dpm_set_power_state] *ERROR* si_restrict_performance_levels_before_switch failed
[ 4.369450] Console: switching to colour frame buffer device 240x67
[ 4.472816] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 4.473347] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 4.477393] loop: module loaded
[ 4.477809] ahci 0000:05:12.0: runtime IRQ mapping not provided by arch
[ 4.477815] ahci 0000:05:12.0: version 3.0
[ 4.477858] ahci 0000:05:12.0: controller can't do 64bit DMA, forcing 32bit
[ 4.478430] ahci 0000:05:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 4.479001] ahci 0000:05:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 4.480814] scsi host0: ahci
[ 4.481169] scsi host1: ahci
[ 4.481535] scsi host2: ahci
[ 4.481880] scsi host3: ahci
[ 4.482096] ata1: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209500 irq 9
[ 4.482612] ata2: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209580 irq 9
[ 4.483116] ata3: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209600 irq 9
[ 4.483622] ata4: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209680 irq 9
[ 4.484328] pata_atiixp 0000:05:14.1: runtime IRQ mapping not provided by arch
[ 4.484988] scsi host4: pata_atiixp
[ 4.485385] scsi host5: pata_atiixp
[ 4.485642] ata5: PATA max UDMA/100 cmd 0x11030 ctl 0x11054 bmdma 0x11000 irq 9
[ 4.486146] ata6: DUMMY
[ 4.486751] libphy: Fixed MDIO Bus: probed
[ 4.487430] random: fast init done
[ 4.487861] PA Semi PWRficient DMA library initialized (20 tx, 64 rx channels)
[ 4.488424] pasemi_mac 0000:00:14.0: runtime IRQ mapping not provided by arch
[ 4.488493] pasemi_mac 0000:00:14.1: runtime IRQ mapping not provided by arch
[ 4.488540] pasemi_mac 0000:00:14.2: runtime IRQ mapping not provided by arch
[ 4.488584] pasemi_mac 0000:00:14.3: runtime IRQ mapping not provided by arch
[ 4.488823] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[ 4.489257] pasemi_mac 0000:00:15.0: runtime IRQ mapping not provided by arch
[ 4.489291] pasemi_mac 0000:00:15.0: no mac address in device tree, not configuring
[ 4.489854] pasemi_mac 0000:00:15.1: runtime IRQ mapping not provided by arch
[ 4.489952] 8139cp 0000:06:06.0: runtime IRQ mapping not provided by arch
[ 4.489956] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.490440] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 4.491193] 8139too 0000:06:06.0: runtime IRQ mapping not provided by arch
[ 4.491195] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 4.492500] 8139too 0000:06:06.0 eth1: RealTek RTL8139 at 0x(____ptrval____), f8:1a:67:02:3c:52, IRQ 5
[ 4.493260] PPP generic driver version 2.4.2
[ 4.493713] PPP BSD Compression module registered
[ 4.493996] PPP Deflate Compression module registered
[ 4.494319] NET: Registered protocol family 24
[ 4.494594] orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
[ 4.494597] orinoco_plx 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]>, Daniel Barlow <[email protected]>)
[ 4.494642] orinoco_pci 0.15 (Pavel Roskin <[email protected]>, David Gibson <[email protected]> & Jean Tourrilhes <[email protected]>)
[ 4.494977] electra-cf f0000000.cf: at mem 0xf0000000 io 0xf1000000 irq 17
[ 4.495583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.496049] ehci-pci: EHCI PCI platform driver
[ 4.496361] ehci-pci 0000:05:13.5: runtime IRQ mapping not provided by arch
[ 4.496391] ehci-pci 0000:05:13.5: enabling bus mastering
[ 4.496427] ehci-pci 0000:05:13.5: EHCI Host Controller
[ 4.496828] ehci-pci 0000:05:13.5: new USB bus registered, assigned bus number 1
[ 4.514398] ehci-pci 0000:05:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 4.532173] ehci-pci 0000:05:13.5: debug port 1
[ 4.549925] ehci-pci 0000:05:13.5: irq 12, io mem 0xa0209800
[ 4.574291] ehci-pci 0000:05:13.5: USB 2.0 started, EHCI 1.00
[ 4.591825] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 4.609873] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.628019] usb usb1: Product: EHCI Host Controller
[ 4.646206] usb usb1: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ehci_hcd
[ 4.665028] usb usb1: SerialNumber: 0000:05:13.5
[ 4.683798] hub 1-0:1.0: USB hub found
[ 4.702209] hub 1-0:1.0: 10 ports detected
[ 4.720957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.739772] ohci-pci: OHCI PCI platform driver
[ 4.758659] ohci-pci 0000:05:13.0: runtime IRQ mapping not provided by arch
[ 4.758677] ohci-pci 0000:05:13.0: enabling bus mastering
[ 4.758682] ohci-pci 0000:05:13.0: OHCI PCI host controller
[ 4.777927] ohci-pci 0000:05:13.0: new USB bus registered, assigned bus number 2
[ 4.791566] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.803323] ohci-pci 0000:05:13.0: irq 9, io mem 0xa0208000
[ 4.813334] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.848240] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.867725] ata3.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[ 4.884844] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.889369] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 4.902167] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.921087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.959875] ata1.00: ATA-10: TS256GSSD230S, R0427BNR, max UDMA/133
[ 4.959879] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.978864] usb usb2: Product: OHCI PCI host controller
[ 4.978868] usb usb2: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 4.997243] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.015971] usb usb2: SerialNumber: 0000:05:13.0
[ 5.033673] ata3.00: configured for UDMA/100
[ 5.033717] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.052908] hub 2-0:1.0: USB hub found
[ 5.070784] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.089115] hub 2-0:1.0: 2 ports detected
[ 5.106558] ata1.00: configured for UDMA/133
[ 5.106758] scsi 0:0:0:0: Direct-Access ATA TS256GSSD230S 7BNR PQ: 0 ANSI: 5
[ 5.125385] ata4.00: ATA-8: ST1000DM003-1CH162, CC44, max UDMA/133
[ 5.143903] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 5.162775] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 5.162784] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.181556] sd 0:0:0:0: [sda] Write Protect is off
[ 5.201528] ohci-pci 0000:05:13.1: runtime IRQ mapping not provided by arch
[ 5.219916] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.240447] ohci-pci 0000:05:13.1: enabling bus mastering
[ 5.259798] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.280492] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 5.299950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.320397] ohci-pci 0000:05:13.1: OHCI PCI host controller
[ 5.340650] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.361372] ohci-pci 0000:05:13.1: new USB bus registered, assigned bus number 3
[ 5.381147] ata4.00: configured for UDMA/133
[ 5.382412] sda: RDSK (512) sda1 (DOS^A)(res 2 spb 2) sda2 (SFS^B)(res 2 spb 2) sda3 (SFS^B)(res 2 spb 2) sda4 (SFS^B)(res 2 spb 2) sda5 (SFS^B)(res 2 spb 2)
[ 5.402544] ohci-pci 0000:05:13.1: irq 10, io mem 0xa0207000
[ 5.442292] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 5.469171] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.488079] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 17)
[ 5.514378] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 5.529527] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[ 5.551088] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.572214] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 5.594297] usb usb3: Product: OHCI PCI host controller
[ 5.655011] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.663027] usb usb3: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 5.663031] usb usb3: SerialNumber: 0000:05:13.1
[ 5.663426] hub 3-0:1.0: USB hub found
[ 5.757202] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 5.757338] hub 3-0:1.0: 2 ports detected
[ 5.778547] ata2.00: configured for UDMA/133
[ 5.778702] scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[ 5.801445] ohci-pci 0000:05:13.2: runtime IRQ mapping not provided by arch
[ 5.822753] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5.845074] ohci-pci 0000:05:13.2: enabling bus mastering
[ 5.866288] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 5.866301] ohci-pci 0000:05:13.2: OHCI PCI host controller
[ 5.887618] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.909972] ohci-pci 0000:05:13.2: new USB bus registered, assigned bus number 4
[ 5.930868] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.930932] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.954058] ohci-pci 0000:05:13.2: irq 11, io mem 0xa0206000
[ 5.975556] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.999047] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
[ 6.046011] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.071484] usb 1-1: Product: USB2.0 Hub
[ 6.071524] sdb: RDSK (512) sdb1 (SWP^@)(res 2 spb 2) sdb2 ((res 2 spb 2) sdb3 ((res 2 spb 2) sdb4 ((res 2 spb 2) sdb5 (EXT^B)(res 2 spb 2) sdb6 ((res 2 spb 2)
[ 6.098888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 6.118849] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.142634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.165869] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224BB SB00 PQ: 0 ANSI: 5
[ 6.190549] usb usb4: Product: OHCI PCI host controller
[ 6.190553] usb usb4: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 6.190556] usb usb4: SerialNumber: 0000:05:13.2
[ 6.216511] hub 4-0:1.0: USB hub found
[ 6.318882] hub 4-0:1.0: 2 ports detected
[ 6.318924] hub 1-1:1.0: USB hub found
[ 6.341764] ohci-pci 0000:05:13.3: runtime IRQ mapping not provided by arch
[ 6.365254] ohci-pci 0000:05:13.3: enabling bus mastering
[ 6.365260] ohci-pci 0000:05:13.3: OHCI PCI host controller
[ 6.389226] ohci-pci 0000:05:13.3: new USB bus registered, assigned bus number 5
[ 6.411614] hub 1-1:1.0: 4 ports detected
[ 6.411987] ohci-pci 0000:05:13.3: irq 10, io mem 0xa0204000
[ 6.461387] sr 2:0:0:0: [sr0] scsi3-mmc drive: 47x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.486110] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.512136] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.512388] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 6.515043] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 6.561980] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.562519] scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC44 PQ: 0 ANSI: 5
[ 6.585065] usb usb5: Product: OHCI PCI host controller
[ 6.585068] usb usb5: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 6.585071] usb usb5: SerialNumber: 0000:05:13.3
[ 6.613442] hub 5-0:1.0: USB hub found
[ 6.637006] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 6.659668] hub 5-0:1.0: 2 ports detected
[ 6.683951] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 6.706938] ohci-pci 0000:05:13.4: runtime IRQ mapping not provided by arch
[ 6.731957] sd 3:0:0:0: [sdc] Write Protect is off
[ 6.754734] ohci-pci 0000:05:13.4: enabling bus mastering
[ 6.779028] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.801538] ohci-pci 0000:05:13.4: OHCI PCI host controller
[ 6.801570] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.824315] ohci-pci 0000:05:13.4: new USB bus registered, assigned bus number 6
[ 6.848466] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.871023] ohci-pci 0000:05:13.4: irq 11, io mem 0xa0205000
[ 6.939011] sdc: RDSK (512) sdc1 (DOS^G)(res 2 spb 2) sdc2 (SFS^B)(res 2 spb 1) sdc3 (SFS^B)(res 2 spb 1) sdc4 (SFS^B)(res 2 spb 2) sdc5 (EXT^B)(res 2 spb 2) sdc6 (EXT^B)(res 2 spb 2)
[ 6.966964] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 6.974370] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 7.017201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.042483] usb usb6: Product: OHCI PCI host controller
[ 7.067437] usb usb6: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[ 7.068298] usb 3-2: new low-speed USB device number 2 using ohci-pci
[ 7.090450] usb usb6: SerialNumber: 0000:05:13.4
[ 7.139645] hub 6-0:1.0: USB hub found
[ 7.163678] hub 6-0:1.0: 2 ports detected
[ 7.187370] usbcore: registered new interface driver usblp
[ 7.211754] usbcore: registered new interface driver usb-storage
[ 7.235916] usbcore: registered new interface driver usbserial_generic
[ 7.259939] usbserial: USB Serial support registered for generic
[ 7.284024] usbcore: registered new interface driver ftdi_sio
[ 7.308207] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.332603] usbcore: registered new interface driver option
[ 7.356672] usbserial: USB Serial support registered for GSM modem (1-port)
[ 7.381252] mousedev: PS/2 mouse device common for all mice
[ 7.405510] usbcore: registered new interface driver synaptics_usb
[ 7.430076] usbcore: registered new interface driver iforce
[ 7.454397] usbcore: registered new interface driver xpad
[ 7.477996] usbcore: registered new interface driver usb_acecad
[ 7.501322] usbcore: registered new interface driver aiptek
[ 7.524234] usbcore: registered new interface driver gtco
[ 7.524311] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[ 7.544670] usbcore: registered new interface driver hanwang
[ 7.544696] usbcore: registered new interface driver kbtab
[ 7.588886] usb 3-2: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[ 7.588891] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.588894] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 7.588897] usb 3-2: Manufacturer: Logitech
[ 7.695082] rtc_cmos rtc_cmos: registered as rtc0
[ 7.715669] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 7.736177] i2c /dev entries driver
[ 7.757178] i2c-pasemi 0000:00:1c.0: runtime IRQ mapping not provided by arch
[ 7.757318] i2c-pasemi 0000:00:1c.1: runtime IRQ mapping not provided by arch
[ 7.757458] i2c-pasemi 0000:00:1c.2: runtime IRQ mapping not provided by arch
[ 7.757624] IR NEC protocol handler initialized
[ 7.777920] IR RC5(x/sz) protocol handler initialized
[ 7.798405] IR RC6 protocol handler initialized
[ 7.819020] IR JVC protocol handler initialized
[ 7.839302] IR Sony protocol handler initialized
[ 7.859573] IR SANYO protocol handler initialized
[ 7.879652] IR Sharp protocol handler initialized
[ 7.899488] IR MCE Keyboard/mouse protocol handler initialized
[ 7.919246] IR XMP protocol handler initialized
[ 7.919262] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[ 7.954296] i2c i2c-10: Detected TI TMP423 chip at 0x4c
[ 7.957577] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.996494] usb 1-1.1: Product: Ultra USB 3.0
[ 8.017109] usb 1-1.1: Manufacturer: SanDisk
[ 8.037443] usb 1-1.1: SerialNumber: 4C530001230914112545
[ 8.039349] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
[ 8.075837] pasemi_edac 0000:00:04.0: runtime IRQ mapping not provided by arch
[ 8.076172] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 8.076333] EDAC MC0: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:04.0 (POLLED)
[ 8.095602] scsi host6: usb-storage 1-1.1:1.0
[ 8.114076] pasemi_edac 0000:00:05.0: runtime IRQ mapping not provided by arch
[ 8.133792] EDAC MC1: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:05.0 (POLLED)
[ 8.161167] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:11.0/0000:05:13.1/usb3/3-2/3-2:1.0/0003:046D:C050.0001/input/input0
[ 8.183269] hid-generic 0003:046D:C050.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:13.1-2/input0
[ 8.205834] usbcore: registered new interface driver usbhid
[ 8.228184] usbhid: USB HID core driver
[ 8.250538] no UART detected at 0x1
[ 8.272314] usb 1-1.3: new low-speed USB device number 5 using ehci-pci
[ 8.273111] snd_hda_intel 0000:01:00.1: runtime IRQ mapping not provided by arch
[ 8.293761] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[ 8.315146] snd_hda_intel 0000:05:14.2: runtime IRQ mapping not provided by arch
[ 8.315170] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[ 8.335781] usbcore: registered new interface driver snd-usb-audio
[ 8.356592] usbcore: registered new interface driver snd-ua101
[ 8.376119] usbcore: registered new interface driver snd-usb-usx2y
[ 8.395347] usbcore: registered new interface driver snd-usb-caiaq
[ 8.414208] usbcore: registered new interface driver snd-usb-6fire
[ 8.432647] usbcore: registered new interface driver snd-usb-hiface
[ 8.450825] usbcore: registered new interface driver snd-bcd2000
[ 8.468883] usbcore: registered new interface driver snd_usb_pod
[ 8.486852] usbcore: registered new interface driver snd_usb_podhd
[ 8.504646] usbcore: registered new interface driver snd_usb_toneport
[ 8.522469] usbcore: registered new interface driver snd_usb_variax
[ 8.540026] oprofile: using ppc64/pa6t performance monitoring.
[ 8.540240] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 8.540768] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input1
[ 8.558388] Initializing XFRM netlink socket
[ 8.593051] NET: Registered protocol family 10
[ 8.609411] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input2
[ 8.610996] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10
[ 8.647039] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.647402] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input3
[ 8.665684] usb 1-1.3: Product: USB Keyboard
[ 8.703312] usb 1-1.3: Manufacturer: SIGMACHIP
[ 8.720472] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input4
[ 8.744572] Segment Routing with IPv6
[ 8.767054] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:11.0/0000:05:13.5/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0026.0002/input/input7
[ 8.782326] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 8.812847] NET: Registered protocol family 17
[ 8.835042] NET: Registered protocol family 15
[ 8.856771] drmem: No dynamic reconfiguration memory found
[ 8.878457] No cpufreq driver, powersavings modes disabled
[ 8.900090] Using PA6T idle loop (spin)
[ 8.921967] hid-generic 0003:1C4F:0026.0002: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:05:13.5-1.3/input0
[ 8.944797] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input5
[ 8.945213] Loading compiled-in X.509 certificates
[ 8.966815] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[ 8.990021] Btrfs loaded, crc32c=crc32c-generic
[ 9.011965] snd_hda_codec_idt hdaudioC1D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.058516] rtc_cmos rtc_cmos: setting system clock to 2019-04-09 18:29:20 UTC (1554834560)
[ 9.058520] snd_hda_codec_idt hdaudioC1D3: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 9.058523] snd_hda_codec_idt hdaudioC1D3: mono: mono_out=0x0
[ 9.084403] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:11.0/0000:05:13.5/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0026.0003/input/input8
[ 9.106753] snd_hda_codec_idt hdaudioC1D3: dig-out=0x21/0x0
[ 9.131735] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.156487] snd_hda_codec_idt hdaudioC1D3: inputs:
[ 9.184036] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.208277] snd_hda_codec_idt hdaudioC1D3: Front Mic=0xb
[ 9.208284] snd_hda_codec_idt hdaudioC1D3: Rear Mic=0xe
[ 9.208288] snd_hda_codec_idt hdaudioC1D3: Line=0xc
[ 9.208291] snd_hda_codec_idt hdaudioC1D3: CD=0x12
[ 9.235083] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:11.0/0000:05:13.5/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0026.0003/input/input9
[ 9.265874] ALSA device list:
[ 9.288170] scsi 6:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 9.311991] No soundcards found.
[ 9.312123] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input6
[ 9.338337] hid-generic 0003:1C4F:0026.0003: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:05:13.5-1.3/input1
[ 9.362956] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 9.390564] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 9.414971] cfg80211: failed to load regulatory.db
[ 9.531317] sd 6:0:0:0: [sdd] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 9.638071] sd 6:0:0:0: [sdd] Write Protect is off
[ 9.664630] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 9.665696] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.700452] sdd: sdd1
[ 9.730456] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 10.086439] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input10
[ 10.114472] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input11
[ 10.142807] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input12
[ 10.171423] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input13
[ 10.200497] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input14
[ 10.229980] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input15
[ 10.244777] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 10.258199] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input16
[ 10.287863] VFS: Mounted root (ext4 filesystem) readonly on device 8:22.
[ 10.316446] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input17
[ 10.400907] devtmpfs: mounted
[ 10.436407] Freeing unused kernel memory: 1004K
[ 10.469809] This architecture does not have kernel memory protection.
[ 10.503083] Run /sbin/init as init process
[ 10.825276] random: crng init done
Hi Musa,musa wrote: Its start with some lag and 2 to 3 min. after it break down.
Please try a msdos partition table. You can create it with GParted.sailorMH wrote: Hi Christian,
here is dmesg - i don't finy anything regarding cfcard
I also try resize ext2 filesysytem to 3.9G - no change, not visible in fienix/5.1
and then format to fat16, 3.9G * also not visible in fienix/5.1. But this time during boot to AmigaOS I recieve the message - "distorted filesystem". I comment the cfide.device.kmod now.
Next I try again prepare the cfcard from linux side, maybe its corrupted.
Code: Select all
[ 11.718567] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 11.753692] systemd[1]: Detected architecture ppc64.
[ 11.914955] systemd[1]: Set hostname to <Fienix>.
[ 12.667162] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 12.701668] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 13.295597] systemd[1]: Listening on udev Kernel Socket.
[ 13.364308] systemd[1]: Listening on Syslog Socket.
[ 13.432233] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 13.500857] systemd[1]: Listening on Journal Socket.
[ 13.567804] systemd[1]: Reached target Swap.
[ 16.802840] sr 2:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 16.826241] sr 2:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current]
[ 16.848506] sr 2:0:0:0: [sr0] tag#0 ASC=0x6f ASCQ=0x3
[ 16.869591] sr 2:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[ 16.890834] print_req_error: I/O error, dev sr0, sector 2048
[ 16.967848] sr 2:0:0:0: [sr0] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 16.989871] sr 2:0:0:0: [sr0] tag#1 Sense Key : 0x5 [current]
[ 17.011805] sr 2:0:0:0: [sr0] tag#1 ASC=0x6f ASCQ=0x3
[ 17.032805] sr 2:0:0:0: [sr0] tag#1 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[ 17.053244] print_req_error: I/O error, dev sr0, sector 2048
[ 17.073243] Buffer I/O error on dev sr0, logical block 256, async page read
[ 17.688839] sr 2:0:0:0: [sr0] tag#15 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 17.709420] sr 2:0:0:0: [sr0] tag#15 Sense Key : 0x5 [current]
[ 17.729847] sr 2:0:0:0: [sr0] tag#15 ASC=0x6f ASCQ=0x3
[ 17.749980] sr 2:0:0:0: [sr0] tag#15 CDB: opcode=0x28 28 00 00 37 f3 be 00 00 3e 00
[ 17.770193] print_req_error: I/O error, dev sr0, sector 14667512
[ 17.912746] sr 2:0:0:0: [sr0] tag#14 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 17.933317] sr 2:0:0:0: [sr0] tag#14 Sense Key : 0x5 [current]
[ 17.953808] sr 2:0:0:0: [sr0] tag#14 ASC=0x6f ASCQ=0x3
[ 17.974129] sr 2:0:0:0: [sr0] tag#14 CDB: opcode=0x28 28 00 00 37 f3 fa 00 00 02 00
[ 17.994657] print_req_error: I/O error, dev sr0, sector 14667752
[ 18.015137] Buffer I/O error on dev sr0, logical block 1833469, async page read
[ 18.661797] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[ 18.938359] systemd-journald[1638]: Received request to flush runtime journal from PID 1
[ 21.257898] sr 2:0:0:0: [sr0] tag#25 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 21.257906] sr 2:0:0:0: [sr0] tag#25 Sense Key : 0x5 [current]
[ 21.257911] sr 2:0:0:0: [sr0] tag#25 ASC=0x6f ASCQ=0x3
[ 21.257917] sr 2:0:0:0: [sr0] tag#25 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[ 21.257921] print_req_error: I/O error, dev sr0, sector 2048
[ 21.380837] sr 2:0:0:0: [sr0] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 21.380844] sr 2:0:0:0: [sr0] tag#26 Sense Key : 0x5 [current]
[ 21.380849] sr 2:0:0:0: [sr0] tag#26 ASC=0x6f ASCQ=0x3
[ 21.380855] sr 2:0:0:0: [sr0] tag#26 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[ 21.380859] print_req_error: I/O error, dev sr0, sector 2048
[ 21.380863] Buffer I/O error on dev sr0, logical block 256, async page read
[ 21.648810] 8139too 0000:06:06.0 enp6s6: renamed from eth1
[ 21.682078] pasemi_mac 0000:00:14.3 enp0s20f3: renamed from eth0
[ 21.954855] sr 2:0:0:0: [sr0] tag#8 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 21.971766] sr 2:0:0:0: [sr0] tag#8 Sense Key : 0x5 [current]
[ 21.988145] sr 2:0:0:0: [sr0] tag#8 ASC=0x6f ASCQ=0x3
[ 22.004825] sr 2:0:0:0: [sr0] tag#8 CDB: opcode=0x28 28 00 00 37 f3 be 00 00 3e 00
[ 22.021359] print_req_error: I/O error, dev sr0, sector 14667512
[ 22.173333] sr 2:0:0:0: [sr0] tag#7 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 22.190508] sr 2:0:0:0: [sr0] tag#7 Sense Key : 0x5 [current]
[ 22.207400] sr 2:0:0:0: [sr0] tag#7 ASC=0x6f ASCQ=0x3
[ 22.224126] sr 2:0:0:0: [sr0] tag#7 CDB: opcode=0x28 28 00 00 37 f3 fa 00 00 02 00
[ 22.240838] print_req_error: I/O error, dev sr0, sector 14667752
[ 22.257595] Buffer I/O error on dev sr0, logical block 1833469, async page read
[ 28.006847] IPv6: ADDRCONF(NETDEV_UP): enp0s20f3: link is not ready
[ 28.030690] enp0s20f3: Could not attach to phy
[ 28.051059] pasemi_mac 0000:00:14.3: PHY init failed: -19.
[ 28.071480] pasemi_mac 0000:00:14.3: Defaulting to 1Gbit full duplex
[ 28.168434] IPv6: ADDRCONF(NETDEV_UP): enp6s6: link is not ready
[ 28.168644] 8139too 0000:06:06.0 enp6s6: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 35.290315] radeon_dp_aux_transfer_native: 158 callbacks suppressed
[ 188.495442] radeon_dp_aux_transfer_native: 158 callbacks suppressed
[ 199.162637] EXT2-fs (sdd1): warning: mounting unchecked fs, running e2fsck is recommended
[ 200.513862] UDF-fs: INFO Mounting volume 'HOBBIT_AN_UNEXPECTED_JOURNEY', timestamp 2013/01/22 21:32 (1000)
Hi Christianxeno74 wrote:Hi Musa,musa wrote: Its start with some lag and 2 to 3 min. after it break down.
Could you please post the output of glxinfo | grep -i opengl?
Thanks,
Christian
Code: Select all
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080_75.00"
EndSubSection
EndSection
Hi Christianxeno74 wrote:Musa,
Unfortunately, the hardware 3D acceleration doesn’t work with your current configuration.
You need a xorg.conf for your Radeon HD6870.
Please run the "lspci" command to get the BusID of your Radeon HD6870.
After that create a /etc/X11/xorg.conf with the following content:
Then modify the entry BusID with the value you got with the lspci command for example BusID "PCI:1:0:0". Maybe you have to change the display mode.Code: Select all
Section "Monitor" Identifier "Monitor0" EndSection Section "Device" Identifier "Device0" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080_75.00" EndSubSection EndSection
Good luck!
Cheers,
Christian
Code: Select all
vblank_mode=0 glxgearsCode: Select all
glxinfo | grep -i opengl