Page 3 of 3
Re: First keyboard press eaten...
Posted: Sat Jul 02, 2011 2:25 am
by Spectre660
What usb port are you using ?
I am using the right rear port .
On this is a 4 port hub to which is connected a ps/2 keyboard and mouse to usb adaptor.
trixie wrote:Spectre660 wrote:Its is gone with U-Boot 1.3.1d on a Sam flex.
It is still there on my Sam440ep. I have U-Boot 1.3.1d and Update2 installed (uhci.usbhcd V53.7).
Re: First keyboard press eaten...
Posted: Tue Jul 05, 2011 9:35 pm
by ssolie
cha05e90 wrote:I suppose this one might already reported somewhere, so just for the record: On my SAM440ep (mini), UBoot 1.3.1b, the first keyboard press (A-Eon AmigaOne USB keyboard) after booting OS4.1 Update 2 is "eaten"/ignored.
This was a USB software issue and has been fixed.
Re: First keyboard press eaten...
Posted: Wed Jul 06, 2011 5:25 pm
by abalaban
This was a USB software issue and has been fixed.
For my own I'm using a
PS/2 keyboard and I have had the issue on my A1XEG4 since as long as I can remember. Note that in fact that's not really the first keyboard that'is eaten but I suspect the first input.device event related to keyboard (and mouse? but it's more difficult to spot) as moving the mouse prior any keyboard press will solve the problem for me.
Re: First keyboard press eaten...
Posted: Fri Jul 08, 2011 1:56 pm
by afxgroup
ssolie wrote:
This was a USB software issue and has been fixed.
Sadly i must admit that sometimes it still happens also on my A1XE with a PS2 Keyboard. I told this also to max yesterday night. I will report it in bugzilla this evening.
Re: First keyboard press eaten...
Posted: Sat Jul 09, 2011 10:41 am
by tonyw
I can lose the first keypress on my A1-XE using a PS/2 keyboard. It usually happens after a really bad crash, that locks up the machine and requires a case reset. In that case I can be sure that the first keypress is going to be lost.
Using USB keyboards, the first keypress is sometimes lost. It varies with the release (I keep changing releases), the machine (Sam 440ep, Sam 440ep-FLex or Sam 460ex) and what happened last (eg a crash, a HW reset or a power down/up).
Using the current beta release or the current version of Update 3, I don't usually lose the first character. However, if I reset the Sam 460 after a lockup, it is still sometimes lost.
So I would suggest that when Update 3 comes out, you will only lose the first keypress after a total lockup and HW reset.
As to the first key not repeating, I would guess it is the same problem.