Hyperion Entertainment Message Boards

Oh, well,

Perhaps when you get your Sam, you will be able to connect its serial port to the X1k and see the debug output.

tonyw wrote: Fri Feb 11, 2022 12:31 pm Oh, well,

Perhaps when you get your Sam, you will be able to connect its serial port to the X1k and see the debug output.

I have ordered this here now. https://amigakit.amiga.store/amigaone-x ... bqAmR-NvYU

I should probably be able to use a serial for usb and then a windows laptop?

@musa

I got the same (prebuild) in my x1000.

It works with windows and a software serial logger (i.e. PuTTY).

You need the correct settings though.
I'm not at home and can't post the ones I use, but maybe others can.

@musa

I should probably be able to use a serial for USB and then a windows laptop?

Of course just like i and many others do. Just correct cable + putty on the win32 side. There is an article i wrote about: https://wiki.amigaos.net/wiki/Advanced_ ... ging_Guide

Check the part "Serial<->USB"

kas1e wrote: Sat Feb 12, 2022 4:10 pm @musa

I should probably be able to use a serial for USB and then a windows laptop?

Of course just like i and many others do. Just correct cable + putty on the win32 side. There is an article i wrote about: https://wiki.amigaos.net/wiki/Advanced_ ... ging_Guide

Check the part "Serial<->USB"

thanks for the good advice and info.
Do you know if there is anyone who sells a ready-made null modem set?

Proshop have both the cable and the adapter.

Here's a USB/serial adapter:

https://www.proshop.dk/Parallel-Seriel- ... er/2469179

It has a male serial plug, so you'd need a female to female null-modem cable, which is here:

https://www.proshop.dk/Parallel-Seriel- ... le/2472991

- but that says they have to order it, and it can take 12-13 days.

An alternative could be to get a male to female null-modem cable like this

https://www.proshop.dk/Parallel-Seriel- ... FM/2420040

- and a gender-changer like this

https://www.proshop.dk/Parallel-Seriel- ... FF/2478520

Best regards,

Niels

Thanks for the help Niels.
We are almost neighbors, I can see (living in Nivå).
I have a lot of things I need to bring home from Proshop when I get my Sam640 board, so I buy the cables there too.
Can you not just tell me how many wat your power supply in your sam640 have ? is 450 wat ok
Regards Peter

Yep, I'm in Ørholm north of Lyngby. Used to live in Nivå (Niverød) for a few years back in the seventies, actually .

I use a Corsair 450 W PSU in my Sam460ex, and that's working fine with a Radeon HD 5450, an SiI3114 SATA card, and a sound card (don't remember the exact name, but it's one of those with the coloured sockets spread over two separate backplates), plus a conventional HD and an SSD (and an internal SD card).

Best regards,

Niels

Hi Niels
Ok I live in Niverød . Moved here from Fredensborg 3 years ago
Thanks for the info on power supply.
Then I will buy this one, it fits my new tower .

https://www.proshop.dk/Stroemforsyning/ ... us/2485126

And now I'm just waiting for Acube
I will return when there is news
Have a nice day
Peter

Hmm, it says "Varen er udgået" (item is discontinued), so that might be difficult. But I can see several others you can choose instead if you follow their link to similar items.

Best regards,

Niels