New kernels

[Hypex]

I had only about 20% CPU usage with the RC2 if the X1000 not in use.

Just testing now on MATE. System load is around 25% and slightly above. While Firefox is open. Early tests are good. Will try Mint next.

I looked up this error. Not much about it. Appears to mostly turn up when Linux is running in QEMU or some VM.

Code: Select all

[   25.205231] piix4_smbus 0000:05:14.0: SMBus Host Controller not enabled!

[xeno74]

Just testing now on MATE. System load is around 25% and slightly above. While Firefox is open. Early tests are good. Will try Mint next.

Thanks a lot for testing!

[Hypex]

Mint looks good! Xorg load was 2% until I loaded Arctic and now at 7% but smooth. I did notice this USB message. EM interference?

I wonder if it causes trouble with OS4. My keyboard is dead on boot a lot. And even more likely is dead keyboard in boot shell which is a bit useless.

Code: Select all

[   52.799950] usb usb1-port1: disabled by hub (EMI?), re-enabling...
[   52.804861] usb 1-1: USB disconnect, device number 2
[   52.810235] usb 1-1.1: USB disconnect, device number 3
[   52.909601] usb 1-1.2: USB disconnect, device number 4
[   53.171635] usb 1-1: new full-speed USB device number 5 using ohci-pci
[   53.335897] usb 1-1: New USB device found, idVendor=05ac, idProduct=1002, bcdDevice= 1.22
[   53.342791] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   53.348639] usb 1-1: Product: Hub in Apple Extended USB Keyboard
[   53.353401] usb 1-1: Manufacturer: Mitsumi Electric
[   53.358716] hub 1-1:1.0: USB hub found
[   53.361891] hub 1-1:1.0: 3 ports detected
[   53.659626] usb 1-1.1: new full-speed USB device number 6 using ohci-pci
[   53.755899] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=0204, bcdDevice= 1.22
[   53.762972] usb 1-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[   53.768992] usb 1-1.1: Product: Apple Extended USB Keyboard
[   53.773271] usb 1-1.1: Manufacturer: Mitsumi Electric

[xeno74]

Hi All,

I released the RC3 of kernel 6.18 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs) today.

Download and further information: github.com



Please test the kernels.

Thanks,
Christian