New kernels

[xeno74]

Hi All,

I released the RC3 of kernel 6.17 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs) today.

Download and further information: github.com



Please test the kernels.

Thanks,
Christian

[Hypex]

So have tested 6.17 RC3 on both Fienix and Zesty. Working fine as tested. There are the common i2c messages in logs but these look to be permanent now.

[xeno74]

So have tested 6.17 RC3 on both Fienix and Zesty. Working fine as tested. There are the common i2c messages in logs but these look to be permanent now.

Thank you for testing.

Permanent? Do you also have these messages again and again after booting?

[Hypex]

Permanent? Do you also have these messages again and again after booting?

No. Just during boot around the 4 second mark and one final "gasp for air" at the 19 second mark issuing a reset. By permanent I mean as part of the boot process with all these distracting lines about attempting to reset the bus.

[xeno74]

Hi All,

Here is the RC4 of kernel 6.17 for X1000 and e5500 machines (X5000/20, X5000/40, Mirari, and QEMU VMs).

Download and further information: github.com



Please test the kernels.

Thanks,
Christian