New kernels
Re: New kernels
Merry Christmas @All
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: New kernels
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: New kernels
I tested it with my X5000/20 today and I get the same error message. I solved the issue with loading the uImage to an other address.xeno74 wrote: ↑Fri Dec 23, 2022 9:53 am Skateman gets a CRC error while loading the alpha1 and alpha2.
Could someone please test the loading of the alpha1 and alpha2?Code: Select all
Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image!
I successfully downloaded and uncompressed the alpha1 and alpha2 and I was able to load and boot them from a FAT16 partition with U-Boot on my X5000. I was also able to load these kernels with QEMU.
- Output: ... scaning usb for storage devices... 1 Storage Device(s) found ...
Code: Select all
X5000> usb reset
-
Code: Select all
X5000> ls usb 0:1
-
Code: Select all
X5000> setenv bootargs root=LABEL=void rootdelay=5
-
Code: Select all
X5000> fatload usb 0:1 4000000 uImage-6.2
-
Code: Select all
X5000> iminfo 4000000
-
Code: Select all
X5000> fatload usb 0:1 1c00000 cyrus_p5020.dtb
-
Code: Select all
X5000> fatload usb 0:1 2000000 uinitrd-5.10
-
Code: Select all
X5000> bootm 4000000 2000000 1c00000
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
- caseycullen
- Posts: 521
- Joined: Sat Dec 17, 2016 7:12 am
- Location: Madison, WI USA
- Contact:
Re: New kernels
I also receive the "Bad CRC" error in U-Boot when trying to load kernel 6.2 alpha 2 on my X5000/20. However, setting the address to 4000000 as Christian described worked.
-Casey
-Casey
Re: New kernels
That's strange. The RC1 boots without any problems on my X5000/20 with the following commands:
- Output: ... scaning usb for storage devices... 1 Storage Device(s) found ...
Code: Select all
X5000> usb reset
-
Code: Select all
X5000> setenv bootargs root=/dev/sdb2 rootdelay=5
-
Code: Select all
X5000> fatload usb 0:1 1000000 uImage-6.2
-
Code: Select all
X5000> fatload usb 0:1 2000000 cyrus_p5020.dtb
-
Code: Select all
X5000> bootm 1000000 - 2000000
- Output: ... scaning usb for storage devices... 1 Storage Device(s) found ...
Code: Select all
X5000> usb reset
-
Code: Select all
X5000> setenv bootargs root=LABEL=void rootdelay=5
-
Code: Select all
X5000> fatload usb 0:1 1000000 uImage-6.2
-
Code: Select all
X5000> fatload usb 0:1 2000000 cyrus_p5020.dtb
-
Code: Select all
X5000> fatload usb 0:1 4000000 uinitrd-5.10
-
Code: Select all
X5000> iminfo
-
Code: Select all
X5000> bootm 1000000 4000000 2000000
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: New kernels
Thats correct, but the DTB will not be loaded correctly and the onboard NIC will not be adressed correctly and is disabled.caseycullen wrote: ↑Wed Dec 28, 2022 9:48 pm I also receive the "Bad CRC" error in U-Boot when trying to load kernel 6.2 alpha 2 on my X5000/20. However, setting the address to 4000000 as Christian described worked.
-Casey
There still is something wong....
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: New kernels
Could you please test the following commands?
-
Code: Select all
X5000> fatload mmc 0:1 1000000 uImage-6.2
-
Code: Select all
X5000> fatload mmc 0:1 2000000 cyrus_p5020.dtb
-
Code: Select all
X5000> bootm 1000000 - 2000000
-
Code: Select all
X5000> fatload mmc 0:1 1000000 uImage-6.2
-
Code: Select all
X5000> fatload mmc 0:1 2000000 cyrus_p5020.dtb
-
Code: Select all
X5000> fatload mmc 0:1 4000000 uinitrd-5.10
-
Code: Select all
X5000> iminfo
-
Code: Select all
X5000> bootm 1000000 4000000 2000000
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: New kernels
Hi All,
Here is the RC1 of kernel 6.2 for testing.
New:
Please test the kernels.
Thanks,
Christian
Here is the RC1 of kernel 6.2 for testing.
New:
- Linux 6.2-rc1 Brings Stable Intel Arc Graphics, Call Depth Tracking & Many More Features -- phoronix.com
- 6.2-rc1 announcement
- dma-mapping fixes
- 9p updates
- Sound updates
- Linux Git log
- Phoronix articles, reviews and news stories covering Linux 6.2
- linux-image-6.2-rc1-X1000_X5000.tar.gz
- uImage-6.2-rc1-dpaa (with dpaa patch)
Please test the kernels.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: New kernels
OK, I have a hint because of the CRC error and DPAA issue.
Kernel 6.1 final. No CRC error and no DPAA issue:
Kernel 6.2-rc1 with CRC error and DPAA issue:
I don't know what the reason is but I think the kernel 6.1 output is the correct one. With these outputs I can try a bisect. I would like to know which commit is responsible for the second output.
Kernel 6.1 final. No CRC error and no DPAA issue:
Code: Select all
[ 3.016487] fsl_dpaa_mac ffe4e8000.ethernet: FMan dTSEC version: 0x08240101
[ 3.016862] fsl_dpaa_mac ffe4e8000.ethernet: FMan MAC address: 00:04:a3:6b:41:65
[ 3.017133] fsl_dpaa_mac ffe4f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@f0000) failed
[ 3.017346] fsl_dpaa_mac ffe4f0000.ethernet: of_get_phy_mode() for /soc@ffe000000/fman@400000/ethernet@f0000 failed. Defaulting to SGMII
[ 3.017570] fsl_dpaa_mac: 10G MAC driver only support 10G speed
[ 3.017668] fsl_dpaa_mac ffe4f0000.ethernet: mac_dev->init() = -22
[ 3.017767] fsl_dpaa_mac: probe of ffe4f0000.ethernet failed with error -22
[ 3.017975] fsl_dpaa_mac ffe5e8000.ethernet: FMan dTSEC version: 0x08240101
[ 3.018316] fsl_dpaa_mac ffe5e8000.ethernet: FMan MAC address: 00:1e:c0:f8:01:59
[ 3.018566] fsl_dpaa_mac ffe5f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@500000/ethernet@f0000) failed
[ 3.018785] fsl_dpaa_mac ffe5f0000.ethernet: of_get_phy_mode() for /soc@ffe000000/fman@500000/ethernet@f0000 failed. Defaulting to SGMII
[ 3.019016] fsl_dpaa_mac: 10G MAC driver only support 10G speed
[ 3.019113] fsl_dpaa_mac ffe5f0000.ethernet: mac_dev->init() = -22
[ 3.019212] fsl_dpaa_mac: probe of ffe5f0000.ethernet failed with error -22
[ 3.021614] fsl_dpaa_mac ffe4e8000.ethernet eth0: Probed interface eth0
[ 3.023900] fsl_dpaa_mac ffe5e8000.ethernet eth1: Probed interface eth1
Code: Select all
[ 3.016644] fsl_dpaa_mac ffe4e8000.ethernet: error -EINVAL: TBI PCS node is not available
[ 3.016804] fsl_dpaa_mac: probe of ffe4e8000.ethernet failed with error -22
[ 3.016989] fsl_dpaa_mac ffe4f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@f0000) failed
[ 3.017210] fsl_dpaa_mac ffe4f0000.ethernet: of_get_phy_mode() for /soc@ffe000000/fman@400000/ethernet@f0000 failed. Defaulting to SGMII
[ 3.017442] fsl_dpaa_mac: FMan XGEC version: 0x00010330
[ 3.017706] fsl_dpaa_mac ffe5e8000.ethernet: error -EINVAL: TBI PCS node is not available
[ 3.017844] fsl_dpaa_mac: probe of ffe5e8000.ethernet failed with error -22
[ 3.018026] fsl_dpaa_mac ffe5f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@500000/ethernet@f0000) failed
[ 3.018248] fsl_dpaa_mac ffe5f0000.ethernet: of_get_phy_mode() for /soc@ffe000000/fman@500000/ethernet@f0000 failed. Defaulting to SGMII
[ 3.018476] fsl_dpaa_mac: FMan XGEC version: 0x00010330
[ 3.020561] fsl_dpaa_mac ffe4f0000.ethernet: Using random MAC address: 6e:06:f4:54:9f:bf
[ 3.021882] fsl_dpaa_mac ffe4f0000.ethernet eth0: Probed interface eth0
[ 3.023828] fsl_dpaa_mac ffe5f0000.ethernet: Using random MAC address: ea:96:eb:45:0a:a2
[ 3.025153] fsl_dpaa_mac ffe5f0000.ethernet eth1: Probed interface eth1
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: New kernels
Let me know if you want to bisect so i can help you testing the kernels needed.
Dave
Dave
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full