Skateman wrote: ↑Tue Sep 07, 2021 8:42 pm
Kernel 5.15 Alpha 5 up and running fine on the AmigaOne X5000
Reading and Writing to and from my NTFS Formatted SSDEXT device without problems!! GREAT!
Hi Skateman,
Thanks a lot for testing the alpha 5 and many thanks for testing NTFS! Did you mount your NTFS volume with “-t ntfs3“? The old NTFS-3G which uses the FUSE file system interface is still the default NTFS driver. You can check it with “mount | grep <your NTFS partition>“.
Question... ever since the the onboard DPAA Ethernet adapter is usable, the internet speed has been capped to 100Mbps... (while my Link is 1Gbit and internal data transfers are also far above the 100mbit ) Any idea
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Skateman wrote: ↑Sun Sep 12, 2021 8:36 pm
Kernel 5.15 Alpha 6 up and running fine on my AmigaOne X5000
Question... ever since the the onboard DPAA Ethernet adapter is usable, the internet speed has been capped to 100Mbps... (while my Link is 1Gbit and internal data transfers are also far above the 100mbit ) Any idea
Thanks a lot for testing! How is the internet speed if you test it from another computer?
kilaueabart wrote: ↑Mon Sep 13, 2021 11:50 pm
Oops! I got too busy trying to get Void going and slept through the beginning of kernel 15. Now I can say that 5.15.0-rc1 boots OK here.
Skateman wrote: ↑Sun Sep 12, 2021 8:36 pm Question... ever since the the onboard DPAA Ethernet adapter is usable, the internet speed has been capped to 100Mbps... (while my Link is 1Gbit and internal data transfers are also far above the 100mbit ) Any idea
Interesting... Could this discusion be continued on it's own thread? There might be now a clue why the onboard ethernet works directly only for you, while others have to use the unplug/replug trick....
Since the RC1 of kernel 5.13, -smp 2 and -smp 4 don't work with a
virtual e5500 QEMU KVM-HV machine anymore. [1]
I see in the serial console, that the uImage doesn't load. I use the
following QEMU command for booting:
FYI
My normal speed is around 600 / 40 Mbit (as shown in the screenshot)
With the X5000 DPAA on the CLI 300+ mbit is not a problem (see Speedtest-cli output) . Using a browser...the speed is always capped with a max of 100Mbit.
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full