Void Linux

AmigaOne X5000 platform specific issues related to Linux only.
Roland
Posts: 824
Joined: Tue May 02, 2017 7:23 am

Re: Void Linux

Post by Roland »

xeno74 wrote: Wed Sep 01, 2021 10:18 am I installed and tested the Eolie WebKit web browser on Void Linux today and it works better than Epiphany. It loads websites very fast. You don't need to start it with the activated variable "WEBKIT_DISABLE_COMPOSITING_MODE".
Thank you for the tip... It indeed works much better than Epihany! Have you found a way to import bookmarks into it? There seemed to be only the options 'Chrome' and 'Chromium', which are not present.

For some reason Eolie did not appear in the 'Internet' menu but I had to start it from terminal. Is that normal for it....?

How do you manage those variables in Eolie? The usual 'about:config' did not work with it.
- Roland -
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

Roland wrote: Wed Sep 01, 2021 4:26 pm Thank you for the tip... It indeed works much better than Epihany! Have you found a way to import bookmarks into it?
I successfully added some bookmarks but I didn't try to import them.
Roland wrote: Wed Sep 01, 2021 4:26 pm For some reason Eolie did not appear in the 'Internet' menu but I had to start it from terminal. Is that normal for it....?
Yes, it's normal. I created a launcher on the desktop.
Roland wrote: Wed Sep 01, 2021 4:26 pm How do you manage those variables in Eolie? The usual 'about:config' did not work with it.
I don't need to manage any variables in Eolie currently.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

Another screenshot of Eolie on the X1000:

Image
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

xeno74 wrote: Sun Aug 22, 2021 7:46 am Date and Time with NTP

Install the package NTP:

Code: Select all

sudo xbps-install -S ntp
Enable the service:

Code: Select all

sudo ln -s /etc/sv/ntpd /var/service
Reboot and check if the NTP service works:

Code: Select all

sudo sv status ntpd
Output: run: ntpd: (pid 2296) 493497782s
It seems, it takes longer to get the correct date and time with NTP on Void Linux so all SSL certifcates aren't valid. I solved it with modifying the NTP runit script:

sudo vi /etc/sv/ntpd/run

Code: Select all

#!/bin/sh
# exec isc-ntpd -g -u ntpd:ntpd -n >/dev/null 2>&1
exec ntpdate pool.ntp.org
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

Timezone

The default system timezone can be set by linking the timezone file to /etc/localtime:

For example for Berlin:

Code: Select all

sudo ln -sf /usr/share/zoneinfo/Europe/Berlin /etc/localtime
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

Installation of the new Arctic Fox 27.12.0 deb package on Void PPC Linux:

Image
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
kilaueabart
Posts: 1070
Joined: Mon Mar 05, 2012 2:36 am

Re: Void Linux

Post by kilaueabart »

xeno74 wrote: Tue Aug 31, 2021 7:57 pm Maybe glamor is the problem. Please rename the libglamoregl.so to libglamoregl.so.bak as root.

Code: Select all

mv /usr/lib/xorg/modules/libglamoregl.so /usr/lib/xorg/modules/libglamoregl.so.bak
That didn't work, and then I found something that made me think my install was incomplete, so I reformatted /dev/sd8 and unarchived VOID in it again. But I had the same problem as the first time, so I added xorg.conf and tried again. Again, the same as before. So I followed the above suggestion from you.

Here is something really weird, that I don't understand at all.

Code: Select all

root@Fienix:/media/fienix/VOID# mv usr/lib/xorg/modules/libglamoregl.so /usr/lib/xorg/modules/libglamoregl.so.bak
root@Fienix:/media/fienix/VOID# ls usr/lib/xorg/modules/                       
drivers     input      libfb.so       libshadow.so    libvgahw.so
extensions  libexa.so  libfbdevhw.so  libshadowfb.so  libwfb.so
The mv instruction seemed to work. No error message. As I understand mv, usr/lib/xorg/modules should now contain two versions of libglamoregl, but in fact there are none! What gives?

I should give up on VOID. My mind is getting way too old for this.
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

kilaueabart wrote: Sun Sep 05, 2021 10:43 pm

Code: Select all

root@Fienix:/media/fienix/VOID# mv usr/lib/xorg/modules/libglamoregl.so /usr/lib/xorg/modules/libglamoregl.so.bak
You moved libglamoregl from your Void partition to your Fienix partition.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
kilaueabart
Posts: 1070
Joined: Mon Mar 05, 2012 2:36 am

Re: Void Linux

Post by kilaueabart »

I told you! "My mind is getting way too old for this." I took me a long time to find that evil "/."

I put the libglamoregl.so.bak into VOID/usr/lib/xorg/modules and ran it again. A change from before in what comes up in the upper left corner of the dark screen. Instead of the line I reported earlier, now there are seven lines that appear for about a second at various time intervals. I doubt that they mean anything as far as my problem is concerned, but they say something like

Code: Select all

hub 2-1.4: new high-speed USB device number 4 using fsl-ehci
hub 2-1.4: New USB device found, idVendor=05c3, idProduct=0610, bcdDevice=6.55
hub 2-1.4: New USB device strings: mfr=1, Product=2, SerialNumber=0
hub 2-1.4: Product: USB2.1 Hub
hub 2-1.4: Manufacturer: GenesysLogic
hub 2-1.4:1.0  USB hub found
hub 2-1.4:1.0 4 ports detected
The blue rectangle with Out Of Range continues to flash screen center at intervals.
I think USB2 might be where I have the kernel, but not sure how to verify it from here.
User avatar
xeno74
Posts: 9319
Joined: Fri Mar 23, 2012 7:58 am

Re: Void Linux

Post by xeno74 »

Do you still use the following xorg.conf?

Code: Select all

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Device"
Identifier "Device0"
Driver "fbdev"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Post Reply