I tested it today and I can find them in the directory /home/amigaone.kilaueabart wrote: ↑Thu Dec 30, 2021 12:01 am Made and saved some screenshots in void today but I can't find them anywhere!
Void Linux
Re: Void Linux
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Void Linux
Kernel 5.16 RC8 up and running using Voidlinux (for the first time)
Big picture.. https://www.skateman.nl/wp-content/uplo ... -46-49.png
Still solving some issues with Voidlinux at the moment!..
UPDATE... after updating Voidlinux....its broken... My screen is pixelated and unreadable... might need to fiddle with an Xorg.conf again..
Big picture.. https://www.skateman.nl/wp-content/uplo ... -46-49.png
Still solving some issues with Voidlinux at the moment!..
UPDATE... after updating Voidlinux....its broken... My screen is pixelated and unreadable... might need to fiddle with an Xorg.conf again..
Last edited by Skateman on Sun Feb 27, 2022 9:24 am, edited 1 time in total.
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: Void Linux
Many thanks for testing! Maybe it is the issue with libglamoregl.so. If yes then please rename the libglamoregl.so to libglamoregl.so.bak. You can find it in the directory /usr/lib/xorg/modules/.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Void Linux
Yeah, back online with VoidLinux....
You were correct with the solution "please rename the libglamoregl.so to libglamoregl.so.bak. You can find it in the directory /usr/lib/xorg/modules/."
Still have some other strange issues... the nm-network-applet does not seem to work. (enable networking is also grayed out).. but i have a working internet connection...the onboard eth is working fine.
I did uninstall and reinstalled the network applet but no luck yet..
You were correct with the solution "please rename the libglamoregl.so to libglamoregl.so.bak. You can find it in the directory /usr/lib/xorg/modules/."
Still have some other strange issues... the nm-network-applet does not seem to work. (enable networking is also grayed out).. but i have a working internet connection...the onboard eth is working fine.
I did uninstall and reinstalled the network applet but no luck yet..
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: Void Linux
I configured my network with the command "dhcpcd".
If it works then "ln -s /etc/sv/dhcpcd /var/service/dhcpcd".
If it works then "ln -s /etc/sv/dhcpcd /var/service/dhcpcd".
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Void Linux
A simple way to configure a static network configuration is to add the necessary ip commands to the "/etc/rc.local" file. With "ip a", you can figure out which name your network interface has. You can configure your desktop firewall as well in this file. I added the ssh service to the firewall configuration additionally.
For example for the network interface eth0:
After that disable the service "dhcpcd" with the command "rm /var/service/dhcpcd".
Desktop firewall:
For example for the network interface eth0:
Code: Select all
ip link set dev eth0 up
ip addr add 192.168.1.2/24 brd + dev eth0
ip route add default via 192.168.1.1
iptables -t filter -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -t filter -A INPUT -p tcp --dport 22 -j ACCEPT
iptables -t filter -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -t filter -A INPUT -i lo -j ACCEPT
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP
Desktop firewall:
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Void Linux
Nope.. network manager is not running. But Onboard interace ETH0 is up and functional...
[amigaone@void-live ~]$ sudo dhcpcd
Password:
sending commands to dhcpcd process
Seems to do nothing...
As i DD`d the partition of the void-live image to my sdb1 partition...could this be a problem ? All seems to function well.
Big picture: https://www.skateman.nl/wp-content/uplo ... -08-46.png
[amigaone@void-live ~]$ sudo dhcpcd
Password:
sending commands to dhcpcd process
Seems to do nothing...
As i DD`d the partition of the void-live image to my sdb1 partition...could this be a problem ? All seems to function well.
Big picture: https://www.skateman.nl/wp-content/uplo ... -08-46.png
Last edited by Skateman on Sun Feb 27, 2022 9:24 am, edited 1 time in total.
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: Void Linux
Unfortunately, I don't use NetworkManager on Void. I use dhcpcd and sometimes the manual configuration in the file /etc/rc.local.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Void Linux
No problem, since the Network interface is working fine i will try to get rid of the nm-network-applet.
Thanks.
Thanks.
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: Void Linux
I was able to install the NetworkManager on Void PPC today.
Instructions:
Instructions:
- # xbps-install -Sv NetworkManager python3-dbus network-manager-applet
- # rm /var/service/dhcpcd
- # ln -s /etc/sv/NetworkManager /var/service/
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.