Kernel 5.14

AmigaOne X5000 platform specific issues related to Linux only.
User avatar
Skateman
Posts: 861
Joined: Thu Aug 10, 2017 8:36 pm
Location: The Netherlands

Re: Kernel 5.14

Post by Skateman »

Kernel 5.14 RC3 and latest Interweb browser up and running fine on my AmigaOne X5000

Image

Big picture http://www.skateman.nl/wp-content/uploa ... 152032.png
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.14

Post by xeno74 »

Skateman wrote: Mon Aug 02, 2021 2:39 pm Kernel 5.14 RC3 and latest Interweb browser up and running fine on my AmigaOne X5000
Hi Skateman,

Thanks a lot for testing the RC3 and for testing the new InterWeb browser.

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.14

Post by xeno74 »

http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
kilaueabart
Posts: 1070
Joined: Mon Mar 05, 2012 2:36 am

Re: Kernel 5.14

Post by kilaueabart »

Not much of a test, but I can report that RC4 boots to Fienix
rc4.png
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.14

Post by xeno74 »

kilaueabart wrote: Thu Aug 05, 2021 9:29 pm Not much of a test, but I can report that RC4 boots to Fienix
Thanks for testing!
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
acefnq
Posts: 236
Joined: Fri Sep 09, 2011 9:58 am

Re: Kernel 5.14

Post by acefnq »

I finally have my Linux systems up and running again on various partitions. In the past I tested new kernel versions by simply replacing the new version number in the bootargs and off course placing the .dtb, kernel and modules in the correct places. When doing this in the past I used a uRamdisk image which let do this no problems. Now if I use a uRamdisk or uInitrd images I seem to be locked to the kernel version on my system (at this time 5.7). If I try to boot pointing to a new kernel the boot simply fails. I have tried to read up on initrd and get the concept but I don't understand how you can make a new initrd image of the new kernel is not already loaded on the system?

How is everyone else booting their systems with Christian's new kernel images?

ace
Roland
Posts: 825
Joined: Tue May 02, 2017 7:23 am

Re: Kernel 5.14

Post by Roland »

acefnq wrote: Sun Aug 08, 2021 8:14 am How is everyone else booting their systems with Christian's new kernel images?
I run it with these commands (uInitrd-5.10 is new enough to work also with uImage-5.14; I have not installed the kernel modules):

setenv bootargs root=LABEL=FIENIX
load mmc 0:1 1000000 uImage-5.14;load mmc 0:1 1c00000 cyrus_5020.dtb;load mmc 0:1 2000000 uInitrd-5.10
bootm 1000000 2000000 1c00000
- Roland -
acefnq
Posts: 236
Joined: Fri Sep 09, 2011 9:58 am

Re: Kernel 5.14

Post by acefnq »

Thanks Roland. My args are almost identical but I will try with an uinitrd-5.10 image.

cheers

ace
acefnq
Posts: 236
Joined: Fri Sep 09, 2011 9:58 am

Re: Kernel 5.14

Post by acefnq »

Roland
Using a backup of Uinitrd-5.10 failed to boot. I got a message similar to the one below:
mount: mounting /dev/disk/by-uuid/***************************** on /root
failed: Invalid argument
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory

Target file system doesn't have /sbin/init
No init found. Try passing init= bootarg

Busybox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built-in shell (ash)
Enter 'help' for a list of built-in commands
(initramfs) _

Any ideas? I can boot with uInitrd-5.10 and kernel image 5.7. I'll look around for another download of uInitrd-5.10 in case mine is corrupt. I basically get the same message trying to boot Fienix or MintPPC32.

ace
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.14

Post by xeno74 »

acefnq wrote: Sun Aug 08, 2021 11:42 am Roland
Using a backup of Uinitrd-5.10 failed to boot. I got a message similar to the one below:
mount: mounting /dev/disk/by-uuid/***************************** on /root
failed: Invalid argument
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory

Target file system doesn't have /sbin/init
No init found. Try passing init= bootarg

Busybox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built-in shell (ash)
Enter 'help' for a list of built-in commands
(initramfs) _

Any ideas? I can boot with uInitrd-5.10 and kernel image 5.7. I'll look around for another download of uInitrd-5.10 in case mine is corrupt. I basically get the same message trying to boot Fienix or MintPPC32.

ace
Could you please boot without an initial ramdisk?
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Post Reply