Page 10 of 11
Re: Kernel 5.7
Posted: Sun May 31, 2020 3:27 am
by xeno74
daz wrote: ↑Sat May 30, 2020 8:18 pm
I use a 5 port hub now, and that doesn't cause problems. Do you have a different router you could try? Or can you connect through a Hub device first?
Darren
I will buy a hub and test.
Thanks
Christian
Re: Kernel 5.7
Posted: Tue Jun 02, 2020 4:57 pm
by xeno74
Hi All,
The final kernel
5.7 is available for our AmigaOnes. Many thanks to all for helping me with testing, reporting, and fixing problems during the kernel 5.7 test time.
New:
Download:
linux-image-5.7-X1000_X5000.tar.gz
Cheers,
Christian
Re: Kernel 5.7
Posted: Tue Jun 02, 2020 7:30 pm
by Roland
daz wrote: ↑Sat May 30, 2020 8:18 pm
I used to have this when I first got my X5000. I'm told it's due to the ports your X5000 is connected to, apparently some 100Mbit ports don't fully comply and upset the DPAA. I use a 5 port hub now, and that doesn't cause problems. Do you have a different router you could try? Or can you connect through a Hub device first?
I have a Sagemcom modem with gigagabit ethernet ports, so the '100M' is not a valid explanation for this issue. Tested also with an A-Link WNAP router - no difference.
Re: Kernel 5.7
Posted: Wed Jun 03, 2020 7:47 am
by Skateman
Final Kernel 5.7 up and running on the AmigaOne X5000
Big picture
http://www.skateman.nl/wp-content/uploa ... -41-32.png
@All
Thanks so much for all the hard work!
Re: Kernel 5.7
Posted: Wed Jun 03, 2020 11:15 am
by acefnq
Christian
Kernel 5.7 up and running. Many thanks for your ongoing dedication and hard work.
ace
Re: Kernel 5.7
Posted: Thu Jun 04, 2020 8:50 am
by xeno74
Skateman wrote: ↑Wed Jun 03, 2020 7:47 am
Final Kernel 5.7 up and running on the AmigaOne X5000
@All
Thanks so much for all the hard work!
Many thanks for testing the final kernel 5.7!
acefnq wrote: ↑Wed Jun 03, 2020 11:15 am
Christian
Kernel 5.7 up and running. Many thanks for your ongoing dedication and hard work.
ace
Thanks a lot for testing!
Re: Kernel 5.7
Posted: Tue Jun 23, 2020 2:17 pm
by xeno74
The KVM issue has been fixed in the stable kernel 5.7.
Code: Select all
This is a note to let you know that I've just added the patch titled
powerpc/64s: Fix KVM interrupt using wrong save area
to the 5.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
powerpc-64s-fix-kvm-interrupt-using-wrong-save-area.patch
and it can be found in the queue-5.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 0bdcfa182506526fbe4e088ff9ca86a31b81828d Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Mon, 15 Jun 2020 16:12:47 +1000
Subject: powerpc/64s: Fix KVM interrupt using wrong save area
From: Nicholas Piggin <npiggin@gmail.com>
commit 0bdcfa182506526fbe4e088ff9ca86a31b81828d upstream.
The CTR register reload in the KVM interrupt path used the wrong save
area for SLB (and NMI) interrupts.
Fixes: 9600f261acaa ("powerpc/64s/exception: Move KVM test to common code")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200615061247.1310763-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/exceptions-64s.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -270,7 +270,7 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
.endif
- ld r10,PACA_EXGEN+EX_CTR(r13)
+ ld r10,IAREA+EX_CTR(r13)
mtctr r10
BEGIN_FTR_SECTION
ld r10,IAREA+EX_PPR(r13)
@@ -298,7 +298,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
.if IKVM_SKIP
89: mtocrf 0x80,r9
- ld r10,PACA_EXGEN+EX_CTR(r13)
+ ld r10,IAREA+EX_CTR(r13)
mtctr r10
ld r9,IAREA+EX_R9(r13)
ld r10,IAREA+EX_R10(r13)
Patches currently in stable-queue which might be from npiggin@gmail.com are
queue-5.7/powerpc-64s-kuap-add-missing-isync-to-kuap-restore-p.patch
queue-5.7/powerpc-64s-exceptions-machine-check-reconcile-irq-s.patch
queue-5.7/powerpc-64s-fix-kvm-interrupt-using-wrong-save-area.patch
queue-5.7/powerpc-book3s64-radix-tlb-determine-hugepage-flush-.patch
queue-5.7/powerpc-64s-exception-fix-machine-check-no-loss-idle.patch
queue-5.7/powerpc-pseries-ras-fix-fwnmi_valid-off-by-one.patch
Re: Kernel 5.7
Posted: Thu Jun 25, 2020 2:14 pm
by xeno74
Hi All,
I released the
stable kernel
5.7.6 today.
New:
Download:
linux-image-5.7.6-X1000_X5000.tar.gz
The stable kernel
5.7.6 works with an ATi Radeon X1950 PRO Extreme:
Cheers,
Christian
Re: Kernel 5.7
Posted: Sat Jul 18, 2020 10:09 am
by Roland
xeno74 wrote: ↑Sun May 31, 2020 3:27 am
daz wrote: ↑Sat May 30, 2020 8:18 pm
I use a 5 port hub now, and that doesn't cause problems. Do you have a different router you could try? Or can you connect through a Hub device first?
I will buy a hub and test.
Christian, did you already get and test a hub...? Did that solve the problem?
I have not yet found any solution to the 'uplug/replug' problem. I tested in Network settings all the different options of 'Link negotiation' (ignore/automatic/manual -> 10M/100M/1G full/halfduplex), but that did not help. Tested also different ethernet cables, no difference.
I just found a working SoundBlaster Live! board and would now like to free a PCI slot for it. Are there any PCIe ethernet boards which would work with PPC Linux? (USB-ethernet dongle does not sound a good solution as the USB ports of X5000 are only v. 2.0).
Re: Kernel 5.7
Posted: Sat Jul 18, 2020 1:16 pm
by xeno74
Roland wrote: ↑Sat Jul 18, 2020 10:09 am
Christian, did you already get and test a hub...? Did that solve the problem?
No, I haven’t test it with a hub yet.
