acefnq wrote:Hi Casey
Tried to install using Xeno's instructions but no luck. Stuck on 18.0.0 (obviously changed files to copy in his instructions). Any ideas of what I might be doing wrong?
Cheers
Allan
Mesa & DRI for PPC
- caseycullen
- Posts: 521
- Joined: Sat Dec 17, 2016 7:12 am
- Location: Madison, WI USA
- Contact:
Re: Mesa & DRI for PPC
Are you using Ubuntu, Debian, or Christian’s release of MATE PowerPC Remix?
Re: Mesa & DRI for PPC
caseycullen wrote:Are you using Ubuntu, Debian, or Christian’s release of MATE PowerPC Remix?
acefnq wrote:Hi Casey
Tried to install using Xeno's instructions but no luck. Stuck on 18.0.0 (obviously changed files to copy in his instructions). Any ideas of what I might be doing wrong?
Cheers
Allan
Ubuntu 16.04, I updated to 18.0.0 ok a while back and again followed those instructions with no luck.
Cheers
Allan
Re: Mesa & DRI for PPC
Allan,
Please post the output of ls -l /usr/lib/powerpc-linux-gnu/mesa/.
Cheers,
Christian
Please post the output of ls -l /usr/lib/powerpc-linux-gnu/mesa/.
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
- caseycullen
- Posts: 521
- Joined: Sat Dec 17, 2016 7:12 am
- Location: Madison, WI USA
- Contact:
Re: Mesa & DRI for PPC
I think there is a problem with the download. I'll fix it this afternoon.
---Casey
---Casey
acefnq wrote:Ubuntu 16.04, I updated to 18.0.0 ok a while back and again followed those instructions with no luck.
Cheers
Allan
- caseycullen
- Posts: 521
- Joined: Sat Dec 17, 2016 7:12 am
- Location: Madison, WI USA
- Contact:
Re: Mesa & DRI for PPC
My apologies! I uploaded the incorrect files, please try again.
http://ppcutopia.ddns.net/html/mesa-18.1.1.tar.gz
---Casey
http://ppcutopia.ddns.net/html/mesa-18.1.1.tar.gz
---Casey
Re: Mesa & DRI for PPC
Caseycaseycullen wrote:My apologies! I uploaded the incorrect files, please try again.
http://ppcutopia.ddns.net/html/mesa-18.1.1.tar.gz
---Casey
No need to apologise, your theone doing the hard lifting here. I re-downloaded and copied over using Xeno's instructions, of course using 18.1.1, no go. All appears to copy ok but I get this output;
allan@ubuntu-mate:~$ glxinfo | grep "OpenGL version"
libGL error: unable to load driver: r600_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: r600
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
X Error of failed request: GLXBadContext
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 6 (X_GLXIsDirect)
Serial number of failed request: 49
Current serial number in output stream: 48
I then backtracked to 18.0.0rc4 worked fine. then 18.0.0 works fine I the tried your 18.03 once again no luck with similar or same output as above. Hope this helps.
Allan
Re: Mesa & DRI for PPC
Hi Casey,
Did you compile your Mesa versions on Debian PPC64?
Cheers,
Christian
Did you compile your Mesa versions on Debian PPC64?
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
- caseycullen
- Posts: 521
- Joined: Sat Dec 17, 2016 7:12 am
- Location: Madison, WI USA
- Contact:
Re: Mesa & DRI for PPC
No; 32-bit Debian.
Allan could you please post the output of
Christian have you tried to upgrade from the Mesa I compiled?
Allan could you please post the output of
Code: Select all
ls -l /usr/lib/powerpc-linux-gnu/mesa/
xeno74 wrote:Hi Casey,
Did you compile your Mesa versions on Debian PPC64?
Cheers,
Christian
Re: Mesa & DRI for PPC
Hi Casey,caseycullen wrote:No; 32-bit Debian.
Allan could you please post the output ofChristian have you tried to upgrade from the Mesa I compiled?Code: Select all
ls -l /usr/lib/powerpc-linux-gnu/mesa/
No, I haven’t upgraded it yet because I don’t have any AmigaOnes here (business trip). Currently, I cross compile the kernels on my PC and test them in virtual QEMU machines. If you compile Mesa on a new Debian version then it could be that it doesn’t work on ubuntu MATE 16.04 LTS.
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Mesa & DRI for PPC
[quote="caseycullen"]No; 32-bit Debian.
Allan could you please post the output of
Christian have you tried to upgrade from the Mesa I compiled?
Casey
I have reverted back to 18.0.0. Do you want me to try again to get the output?
Cheers
Allan
Allan could you please post the output of
Code: Select all
ls -l /usr/lib/powerpc-linux-gnu/mesa/
Casey
I have reverted back to 18.0.0. Do you want me to try again to get the output?
Cheers
Allan