Sata3 controllers

[Roland]

What Sata3 controllers people here have used succesfully with X5000...?

[xeno74]

What Sata3 controllers people here have used succesfully with X5000...?

Spectre660 uses a SATA 3 controller (Marvel 88SE9215 chipset) Link.

[Roland]

Spectre660 uses a SATA 3 controller (Marvel 88SE9215 chipset) Link.

Thanks for the tip! @Sepctre, if you are reading this, what model are you using? Is it pci-e x1?

I am also considering this model from Delock:

https://www.delock.com/produkte/S_89389/merkmale.html

Has anyone tested it? It has both Sata3 and USB3, which would spare space, and it is pci-e x1. There is also a x4 version from Delock, but due to the location of x4 slot in X5000 there might be heat problems as the graphics board would be just beside.

[xeno74]

@Sepctre, if you are reading this, what model are you using? Is it pci-e x1?

Yes, he uses the pci-e x1 model.

PCIEX1 = SATA 3 Controller (Marvel 88SE9215 chipset) for Linux Hard Drive

[Roland]

Yes, he uses the pci-e x1 model.

Ok - sorry, I read carelessly the link... But I'm surpriced if you self don't use a Sata3 controller?! As a maintainer of this Amiga Linux/Kernel business, you must do a lot of testing and reboot your machine continuously... Do you have the nerves for waiting the 'slow' Sata2 disks to boot ?-)

[Spectre660]

For the record it is the past tense . Used.
I no longer have an X5000.

The SATA III card model that I used was this one :
https://www.amazon.com/gp/product/B01ID ... UTF8&psc=1

[Roland]

For the record it is the past tense . Used.
I no longer have an X5000.

I remember that incident... I'm very sorry for it .

The SATA III card model that I used was this one :
https://www.amazon.com/gp/product/B01ID ... UTF8&psc=1

Thanks! Was it working without any issues...?

[Spectre660]

@ Roland

Yes it was working without any issues .
Was using a Samsung 250GB Sata drive connected to it for Linux .