X5000 supported PCIe x1 - SATA controller (SEDNA)?
Posted: Thu Aug 02, 2018 10:31 pm
I already posted this on Amigaworld.net - maybe this forum has any comments?
I acquired a SEDNA - PCI Express (PCIe) SATA III (6G) SSD/HDD Adapter with 1 SATA III port
(https://www.amazon.co.uk/dp/B00FVXMGTY/ ... 41_TE_dp_1)
The HDD is recognized by AOS4.1 if I plug it into an external USB-SATA II adapter but is not recognized when installed on the internal SEDNA adapter card.
Does anyone have experience with this type of adapter (various posts say that SIL3512 and VANTEC is supported but I can't find anything on SEDNA)
Ranger recognizes it as Serial ATA from ASMedia Technology Inc.
Any help is appreciated!
/FRANDSEN
I acquired a SEDNA - PCI Express (PCIe) SATA III (6G) SSD/HDD Adapter with 1 SATA III port
(https://www.amazon.co.uk/dp/B00FVXMGTY/ ... 41_TE_dp_1)
The HDD is recognized by AOS4.1 if I plug it into an external USB-SATA II adapter but is not recognized when installed on the internal SEDNA adapter card.
Does anyone have experience with this type of adapter (various posts say that SIL3512 and VANTEC is supported but I can't find anything on SEDNA)
Ranger recognizes it as Serial ATA from ASMedia Technology Inc.
Any help is appreciated!
/FRANDSEN