Spectre660's Linux downloads for the Sam440/460

Linux only discussion for the AmigaOne 500 and Sam series
User avatar
xeno74
Posts: 6812
Joined: Fri Mar 23, 2012 7:58 am

Re: Spectre660's Linux downloads for the Sam440/460

Post by xeno74 »

Spectre660 wrote:@Xeno74

Could you please replace this
http://www.xenosoft.de/Sam_Lubuntu_14.0 ... tall-2.iso
with
https://dl.dropboxusercontent.com/u/542 ... all-2b.iso

Just tested the initial boot and realized that the bootmenu leaves out the Sam460 install option
I have replaced it with the same file name recently.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Spectre660
Posts: 1502
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Thank you .
xeno74 wrote:
Spectre660 wrote:@Xeno74

Could you please replace this
http://www.xenosoft.de/Sam_Lubuntu_14.0 ... tall-2.iso
with
https://dl.dropboxusercontent.com/u/542 ... all-2b.iso

Just tested the initial boot and realized that the bootmenu leaves out the Sam460 install option
I have replaced it with the same file name recently.
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Spectre660
Posts: 1502
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

3.14.25 Kernels
Back to the latest long term branch that is working for both machines.

Sam460ex (Tested and is working)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz

Sam440ep (Untested)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
User avatar
xeno74
Posts: 6812
Joined: Fri Mar 23, 2012 7:58 am

Re: Spectre660's Linux downloads for the Sam440/460

Post by xeno74 »

Spectre660 wrote:3.14.25 Kernels
Back to the latest long term branch that is working for both machines.

Sam460ex (Tested and is working)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz

Sam440ep (Untested)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz
Thank you and have a lot of fun with your new Sam460ex. :D

Kernel 3.14.25 for the Sam440ep( Flex): Sam440ep-3.14.25.tar.gz
Kernel 3.14.25 for the Sam460ex( Lite): Sam460ex-3.14.25.tar.gz
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Spectre660
Posts: 1502
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Thank you.
xeno74 wrote:
Spectre660 wrote:3.14.25 Kernels
Back to the latest long term branch that is working for both machines.

Sam460ex (Tested and is working)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz

Sam440ep (Untested)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz
Thank you and have a lot of fun with your new Sam460ex. :D

Kernel 3.14.25 for the Sam440ep( Flex): Sam440ep-3.14.25.tar.gz
Kernel 3.14.25 for the Sam460ex( Lite): Sam460ex-3.14.25.tar.gz
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
seventhwonder
Beta Tester
Beta Tester
Posts: 219
Joined: Sat Jun 18, 2011 7:08 am

Re: Spectre660's Linux downloads for the Sam440/460

Post by seventhwonder »

Spectre660 wrote:3.14.25 Kernels
Back to the latest long term branch that is working for both machines.

Sam460ex (Tested and is working)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz
Dear Spectre

I can't boot with 3.14.25 kernel...When I try to boot it, it resets the machine with nothing on serial (I can see some register dump on the screen for a fraction of a second)
Is the kernel parameters same with 3.16.x ?
AmigaOS4 Beta-Tester
**AmigaOne X5000 + 8GB RAM + Radeon RX 560 4GB
**Tabor A1222 + 2GB RAM + Radeon RX 550 2GB **
**Sam460 + 2GB RAM + Radeon RX 550 2GB **
Spectre660
Posts: 1502
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

That is strange. wonder if your download or unpacking of the kernel could have been corrupted.
I have It working with Debian Jessie,Debian Wheezy,Lubuntu 14.04 and Lubuntu 14.10 on my new Sam460ex.

uname -r
3.14.25-Sam460ex

This is my boot menu . Using the same format.

title Lubuntu 14.10 For Sam460ex Kernel 3.14.25
kernel /uImage-3.14.25 root=/dev/sda15 console=ttyS0,115200 console=tty0
dtb /canyonlands-3.14.25.dtb

seventhwonder wrote:
Spectre660 wrote:3.14.25 Kernels
Back to the latest long term branch that is working for both machines.

Sam460ex (Tested and is working)
https://dl.dropboxusercontent.com/u/542 ... .25.tar.gz
Dear Spectre

I can't boot with 3.14.25 kernel...When I try to boot it, it resets the machine with nothing on serial (I can see some register dump on the screen for a fraction of a second)
Is the kernel parameters same with 3.16.x ?
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Spectre660
Posts: 1502
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

@xeno74

I am stuck.
No Kernels after the 3.16 branch boot on the Sam460ex.
Debug output from 3.18-rc7 looks interesting as it may pass the radeon ring test.
I wonder if a kernel expert could help.
I am not on the Linux Kernel mailing lists though.

Code: Select all

U-Boot 2010.06.05a (Jan 30 2012 - 16:06:56)

CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Sam460ex, PCIe 4x + PCIe 1x
I2C: ready
DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4)
PCI: Bus Dev VenId DevId Class Int
00 04 1095 3512 0104 00
00 06 126f 0501 0380 00
PCIE0: successfully set as root-complex
03 00 13f6 0111 0401 60
02 00 1b21 1080 0604 00
PCIE1: successfully set as root-complex
05 00 1002 6758 0300 ff
Net: ppc_4xx_eth0
FPGA: Revision 03 (2010-10-07)
SM502: found
VGA: 1
VESA: OK
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc7-Sam460ex (root@julian-VirtualBox) (gcc v ersion 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Dec 1 06:49:45 AST 2014
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x2fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x30000000-0x7fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x7fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 522752
[ 0.000000] Kernel command line: root=/dev/sda12 console=ttyS0,115200 console =tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2004600K/2097152K available (5960K kernel code, 232K rwda ta, 1492K rodata, 240K init, 1338K bss, 92552K reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000013] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000137] Console: colour dummy device 80x25
[ 0.000585] console [tty0] enabled
[ 0.000613] pid_max: default: 32768 minimum: 301
[ 0.000719] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000742] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002892] devtmpfs: initialized
[ 0.004080] xor: measuring software checksum speed
[ 0.013366] 8regs : 856.000 MB/sec
[ 0.023270] 8regs_prefetch: 780.000 MB/sec
[ 0.033301] 32regs : 1116.000 MB/sec
[ 0.043360] 32regs_prefetch: 996.000 MB/sec
[ 0.043390] xor: using function: 32regs (1116.000 MB/sec)
[ 0.045164] NET: Registered protocol family 16
[ 0.046973] 256k L2-cache enabled
[ 0.047091] PCIE0: Checking link...
[ 0.047104] PCIE0: Device detected, waiting for link...
[ 0.047118] PCIE0: link is up !
[ 0.149203] PCI host bridge /plb/pciex@d00000000 (primary) ranges:
[ 0.149247] MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000
[ 0.149273] MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000
[ 0.149295] IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000
[ 0.149323] OF: no ranges; cannot translate
[ 0.149337] 4xx PCI DMA offset set to 0x00000000
[ 0.149351] 4xx PCI DMA window base to 0x0000000000000000
[ 0.149365] DMA window size 0x0000000080000000
[ 0.149394] PCIE0: successfully set as root-complex
[ 0.149434] PCIE1: Checking link...
[ 0.149446] PCIE1: Device detected, waiting for link...
[ 0.149460] PCIE1: link is up !
[ 0.251472] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.251506] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.251531] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.251553] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.251576] OF: no ranges; cannot translate
[ 0.251589] 4xx PCI DMA offset set to 0x00000000
[ 0.251603] 4xx PCI DMA window base to 0x0000000000000000
[ 0.251617] DMA window size 0x0000000080000000
[ 0.251643] PCIE1: successfully set as root-complex
[ 0.251725] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.251748] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.251773] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.251796] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.251818] OF: no ranges; cannot translate
[ 0.251831] 4xx PCI DMA offset set to 0x00000000
[ 0.251844] 4xx PCI DMA window base to 0x0000000000000000
[ 0.251859] DMA window size 0x0000000080000000
[ 0.261298] PCI: Probing PCI hardware
[ 0.261629] PCI host bridge to bus 0000:40
[ 0.261664] pci_bus 0000:40: root bus resource [io 0xfffc0000-0xfffcffff] (b us address [0x0000-0xffff])
[ 0.261693] pci_bus 0000:40: root bus resource [mem 0xe00000000-0xe7fffffff] (bus address [0x80000000-0xffffffff])
[ 0.261723] pci_bus 0000:40: root bus resource [mem 0xf00000000-0xf000fffff] (bus address [0x00000000-0x000fffff])
[ 0.261753] pci_bus 0000:40: root bus resource [bus 40-ff]
[ 0.261869] PCI: Hiding 4xx host bridge resources 0000:40:00.0
[ 0.264227] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
[ 0.264329] pci 0000:41:00.0: bridge configuration invalid ([bus 02-02]), rec onfiguring
[ 0.264913] pci 0000:41:00.0: PCI bridge to [bus 42-ff]
[ 0.265129] PCI host bridge to bus 0001:80
[ 0.265153] pci_bus 0001:80: root bus resource [io 0xfffe0000-0xfffeffff] (b us address [0x0000-0xffff])
[ 0.265183] pci_bus 0001:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.265233] pci_bus 0001:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.265261] pci_bus 0001:80: root bus resource [bus 80-ff]
[ 0.265358] PCI: Hiding 4xx host bridge resources 0001:80:00.0
[ 0.268290] pci 0001:80:00.0: PCI bridge to [bus 81-bf]
[ 0.268582] PCI host bridge to bus 0002:00
[ 0.268606] pci_bus 0002:00: root bus resource [io 0x0000-0xffff]
[ 0.268629] pci_bus 0002:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.268659] pci_bus 0002:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.268688] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.269444] pci 0000:40:00.0: BAR 13: assigned [io 0xfffc1000-0xfffc1fff]
[ 0.269480] pci 0000:41:00.0: BAR 13: assigned [io 0xfffc1000-0xfffc1fff]
[ 0.269503] pci 0000:42:00.0: BAR 0: assigned [io 0xfffc1000-0xfffc10ff]
[ 0.269528] pci 0000:41:00.0: PCI bridge to [bus 42]
[ 0.269548] pci 0000:41:00.0: bridge window [io 0xfffc1000-0xfffc1fff]
[ 0.269576] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
[ 0.269594] pci 0000:40:00.0: bridge window [io 0xfffc1000-0xfffc1fff]
[ 0.269681] pci 0001:80:00.0: BAR 15: assigned [mem 0xe80000000-0xe8fffffff 6 4bit pref]
[ 0.269706] pci 0001:80:00.0: BAR 14: assigned [mem 0xe90000000-0xe900fffff]
[ 0.269728] pci 0001:80:00.0: BAR 13: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.269754] pci 0001:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64 bit pref]
[ 0.269786] pci 0001:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9001ffff 64 bit]
[ 0.269817] pci 0001:81:00.0: BAR 6: assigned [mem 0xe90020000-0xe9003ffff pr ef]
[ 0.269843] pci 0001:81:00.1: BAR 0: assigned [mem 0xe90040000-0xe90043fff 64 bit]
[ 0.269873] pci 0001:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.269896] pci 0001:80:00.0: PCI bridge to [bus 81-bf]
[ 0.269914] pci 0001:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.269936] pci 0001:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.269957] pci 0001:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64 bit pref]
[ 0.270049] pci 0002:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.270072] pci 0002:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.270095] pci 0002:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pr ef]
[ 0.270120] pci 0002:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.270142] pci 0002:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.270163] pci 0002:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.270184] pci 0002:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.270205] pci 0002:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.270226] pci 0002:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.301427] raid6: int32x1 296 MB/s
[ 0.317839] raid6: int32x2 425 MB/s
[ 0.334967] raid6: int32x4 468 MB/s
[ 0.352097] raid6: int32x8 234 MB/s
[ 0.352120] raid6: using algorithm int32x4 (468 MB/s)
[ 0.352135] raid6: using intx1 recovery algorithm
[ 0.352497] vgaarb: device added: PCI:0001:81:00.0,decodes=io+mem,owns=none,l ocks=none
[ 0.352529] vgaarb: loaded
[ 0.352540] vgaarb: bridge control possible 0001:81:00.0
[ 0.352887] SCSI subsystem initialized
[ 0.353550] usbcore: registered new interface driver usbfs
[ 0.353633] usbcore: registered new interface driver hub
[ 0.353705] usbcore: registered new device driver usb
[ 0.354221] Advanced Linux Sound Architecture Driver Initialized.
[ 0.355004] Switched to clocksource timebase
[ 0.365116] NET: Registered protocol family 2
[ 0.365854] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.365953] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.366093] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.366200] TCP: reno registered
[ 0.366221] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.366253] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.366432] NET: Registered protocol family 1
[ 0.366838] RPC: Registered named UNIX socket transport module.
[ 0.366865] RPC: Registered udp transport module.
[ 0.366879] RPC: Registered tcp transport module.
[ 0.366893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.367606] Could not remap bcsr
[ 0.371640] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_typ e+0x0/0x184)
[ 0.379740] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.392604] ntfs: driver 2.1.31 [Flags: R/W].
[ 0.393213] fuse init (API version 7.23)
[ 0.393779] msgmni has been set to 1486
[ 0.396160] bounce: pool size: 64 pages
[ 0.396256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53)
[ 0.396283] io scheduler noop registered
[ 0.396323] io scheduler cfq registered (default)
[ 0.397061] aer: probe of 0000:40:00.0:pcie02 failed with error -22
[ 0.397116] aer: probe of 0001:80:00.0:pcie02 failed with error -22
[ 0.397191] pcie_pme: probe of 0000:40:00.0:pcie01 failed with error -22
[ 0.397229] pcie_pme: probe of 0001:80:00.0:pcie01 failed with error -22
[ 0.398178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.399131] console [ttyS0] disabled
[ 0.420409] serial8250 serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 23, bas e_baud = 691200) is a U6_16550A
[ 1.436789] console [ttyS0] enabled
[ 1.461000] serial8250 serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 24, bas e_baud = 691200) is a U6_16550A
[ 1.471681] console [ttyS0] disabled
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc7-Sam460ex (root@julian-VirtualBox) (gcc v ersion 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #1 PREEMPT Mon Dec 1 06:49:45 AST 2014
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00000000-0x2fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x30000000-0x7fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x7fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 522752
[ 0.000000] Kernel command line: root=/dev/sda12 console=ttyS0,115200 console =tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2004600K/2097152K available (5960K kernel code, 232K rwda ta, 1492K rodata, 240K init, 1338K bss, 92552K reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000013] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000137] Console: colour dummy device 80x25
[ 0.000585] console [tty0] enabled
[ 0.000613] pid_max: default: 32768 minimum: 301
[ 0.000719] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000742] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002892] devtmpfs: initialized
[ 0.004080] xor: measuring software checksum speed
[ 0.013366] 8regs : 856.000 MB/sec
[ 0.023270] 8regs_prefetch: 780.000 MB/sec
[ 0.033301] 32regs : 1116.000 MB/sec
[ 0.043360] 32regs_prefetch: 996.000 MB/sec
[ 0.043390] xor: using function: 32regs (1116.000 MB/sec)
[ 0.045164] NET: Registered protocol family 16
[ 0.046973] 256k L2-cache enabled
[ 0.047091] PCIE0: Checking link...
[ 0.047104] PCIE0: Device detected, waiting for link...
[ 0.047118] PCIE0: link is up !
[ 0.149203] PCI host bridge /plb/pciex@d00000000 (primary) ranges:
[ 0.149247] MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000
[ 0.149273] MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000
[ 0.149295] IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000
[ 0.149323] OF: no ranges; cannot translate
[ 0.149337] 4xx PCI DMA offset set to 0x00000000
[ 0.149351] 4xx PCI DMA window base to 0x0000000000000000
[ 0.149365] DMA window size 0x0000000080000000
[ 0.149394] PCIE0: successfully set as root-complex
[ 0.149434] PCIE1: Checking link...
[ 0.149446] PCIE1: Device detected, waiting for link...
[ 0.149460] PCIE1: link is up !
[ 0.251472] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.251506] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.251531] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.251553] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.251576] OF: no ranges; cannot translate
[ 0.251589] 4xx PCI DMA offset set to 0x00000000
[ 0.251603] 4xx PCI DMA window base to 0x0000000000000000
[ 0.251617] DMA window size 0x0000000080000000
[ 0.251643] PCIE1: successfully set as root-complex
[ 0.251725] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.251748] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.251773] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.251796] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.251818] OF: no ranges; cannot translate
[ 0.251831] 4xx PCI DMA offset set to 0x00000000
[ 0.251844] 4xx PCI DMA window base to 0x0000000000000000
[ 0.251859] DMA window size 0x0000000080000000
[ 0.261298] PCI: Probing PCI hardware
[ 0.261629] PCI host bridge to bus 0000:40
[ 0.261664] pci_bus 0000:40: root bus resource [io 0xfffc0000-0xfffcffff] (b us address [0x0000-0xffff])
[ 0.261693] pci_bus 0000:40: root bus resource [mem 0xe00000000-0xe7fffffff] (bus address [0x80000000-0xffffffff])
[ 0.261723] pci_bus 0000:40: root bus resource [mem 0xf00000000-0xf000fffff] (bus address [0x00000000-0x000fffff])
[ 0.261753] pci_bus 0000:40: root bus resource [bus 40-ff]
[ 0.261869] PCI: Hiding 4xx host bridge resources 0000:40:00.0
[ 0.264227] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
[ 0.264329] pci 0000:41:00.0: bridge configuration invalid ([bus 02-02]), rec onfiguring
[ 0.264913] pci 0000:41:00.0: PCI bridge to [bus 42-ff]
[ 0.265129] PCI host bridge to bus 0001:80
[ 0.265153] pci_bus 0001:80: root bus resource [io 0xfffe0000-0xfffeffff] (b us address [0x0000-0xffff])
[ 0.265183] pci_bus 0001:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.265233] pci_bus 0001:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.265261] pci_bus 0001:80: root bus resource [bus 80-ff]
[ 0.265358] PCI: Hiding 4xx host bridge resources 0001:80:00.0
[ 0.268290] pci 0001:80:00.0: PCI bridge to [bus 81-bf]
[ 0.268582] PCI host bridge to bus 0002:00
[ 0.268606] pci_bus 0002:00: root bus resource [io 0x0000-0xffff]
[ 0.268629] pci_bus 0002:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.268659] pci_bus 0002:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.268688] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.269444] pci 0000:40:00.0: BAR 13: assigned [io 0xfffc1000-0xfffc1fff]
[ 0.269480] pci 0000:41:00.0: BAR 13: assigned [io 0xfffc1000-0xfffc1fff]
[ 0.269503] pci 0000:42:00.0: BAR 0: assigned [io 0xfffc1000-0xfffc10ff]
[ 0.269528] pci 0000:41:00.0: PCI bridge to [bus 42]
[ 0.269548] pci 0000:41:00.0: bridge window [io 0xfffc1000-0xfffc1fff]
[ 0.269576] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
[ 0.269594] pci 0000:40:00.0: bridge window [io 0xfffc1000-0xfffc1fff]
[ 0.269681] pci 0001:80:00.0: BAR 15: assigned [mem 0xe80000000-0xe8fffffff 6 4bit pref]
[ 0.269706] pci 0001:80:00.0: BAR 14: assigned [mem 0xe90000000-0xe900fffff]
[ 0.269728] pci 0001:80:00.0: BAR 13: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.269754] pci 0001:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64 bit pref]
[ 0.269786] pci 0001:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9001ffff 64 bit]
[ 0.269817] pci 0001:81:00.0: BAR 6: assigned [mem 0xe90020000-0xe9003ffff pr ef]
[ 0.269843] pci 0001:81:00.1: BAR 0: assigned [mem 0xe90040000-0xe90043fff 64 bit]
[ 0.269873] pci 0001:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.269896] pci 0001:80:00.0: PCI bridge to [bus 81-bf]
[ 0.269914] pci 0001:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.269936] pci 0001:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.269957] pci 0001:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64 bit pref]
[ 0.270049] pci 0002:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.270072] pci 0002:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.270095] pci 0002:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pr ef]
[ 0.270120] pci 0002:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.270142] pci 0002:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.270163] pci 0002:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.270184] pci 0002:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.270205] pci 0002:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.270226] pci 0002:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.301427] raid6: int32x1 296 MB/s
[ 0.317839] raid6: int32x2 425 MB/s
[ 0.334967] raid6: int32x4 468 MB/s
[ 0.352097] raid6: int32x8 234 MB/s
[ 0.352120] raid6: using algorithm int32x4 (468 MB/s)
[ 0.352135] raid6: using intx1 recovery algorithm
[ 0.352497] vgaarb: device added: PCI:0001:81:00.0,decodes=io+mem,owns=none,l ocks=none
[ 0.352529] vgaarb: loaded
[ 0.352540] vgaarb: bridge control possible 0001:81:00.0
[ 0.352887] SCSI subsystem initialized
[ 0.353550] usbcore: registered new interface driver usbfs
[ 0.353633] usbcore: registered new interface driver hub
[ 0.353705] usbcore: registered new device driver usb
[ 0.354221] Advanced Linux Sound Architecture Driver Initialized.
[ 0.355004] Switched to clocksource timebase
[ 0.365116] NET: Registered protocol family 2
[ 0.365854] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.365953] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.366093] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.366200] TCP: reno registered
[ 0.366221] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.366253] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.366432] NET: Registered protocol family 1
[ 0.366838] RPC: Registered named UNIX socket transport module.
[ 0.366865] RPC: Registered udp transport module.
[ 0.366879] RPC: Registered tcp transport module.
[ 0.366893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.367606] Could not remap bcsr
[ 0.371640] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_typ e+0x0/0x184)
[ 0.379740] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.392604] ntfs: driver 2.1.31 [Flags: R/W].
[ 0.393213] fuse init (API version 7.23)
[ 0.393779] msgmni has been set to 1486
[ 0.396160] bounce: pool size: 64 pages
[ 0.396256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 53)
[ 0.396283] io scheduler noop registered
[ 0.396323] io scheduler cfq registered (default)
[ 0.397061] aer: probe of 0000:40:00.0:pcie02 failed with error -22
[ 0.397116] aer: probe of 0001:80:00.0:pcie02 failed with error -22
[ 0.397191] pcie_pme: probe of 0000:40:00.0:pcie01 failed with error -22
[ 0.397229] pcie_pme: probe of 0001:80:00.0:pcie01 failed with error -22
[ 0.398178] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.399131] console [ttyS0] disabled
[ 0.420409] serial8250 serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 23, bas e_baud = 691200) is a U6_16550A
[ 1.436789] console [ttyS0] enabled
[ 1.461000] serial8250 serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 24, bas e_baud = 691200) is a U6_16550A
[ 1.471681] console [ttyS0] disabled
[ 1.475559] of_serial 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 23, base_baud = 691200) is a 16550
[ 2.499838] console [ttyS0] enabled
[ 2.503830] of_serial 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 24, base_baud = 691200) is a 16550
[ 2.514362] Generic non-volatile memory driver v1.1
[ 2.525455] brd: module loaded
[ 2.531735] loop: module loaded
[ 2.536123] sata_sil 0002:00:04.0: Applying R_ERR on DMA activate FIS errata fix
[ 2.545163] scsi host0: sata_sil
[ 2.549171] scsi host1: sata_sil
[ 2.552671] ata1: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd84280080 irq 22
[ 2.560451] ata2: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd842800c0 irq 22
[ 2.569729] PPC 4xx OCP EMAC driver, version 3.54
[ 2.575376] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 2.581596] ZMII /plb/opb/emac-zmii@ef600d00 initialized
[ 2.587415] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
[ 2.595066] TAH /plb/opb/emac-tah@ef601350 initialized
[ 2.600590] TAH /plb/opb/emac-tah@ef601450 initialized
[ 2.606339] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
[ 2.614000] eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d5:c5
[ 2.621281] eth0: found Generic MII PHY (0x00)
[ 2.626218] /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
[ 2.633833] eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00
[ 2.641181] eth1: found Generic MII PHY (0x01)
[ 2.646208] PPP generic driver version 2.4.2
[ 2.650969] PPP BSD Compression module registered
[ 2.656054] PPP Deflate Compression module registered
[ 2.661378] NET: Registered protocol family 24
[ 2.666599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.673616] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 2.678672] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 2.687100] ppc-of-ehci 4bffd0400.ehci: irq 32, io mem 0x4bffd0400
[ 2.699019] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 2.705375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.712270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.719543] usb usb1: Product: OF EHCI
[ 2.723336] usb usb1: Manufacturer: Linux 3.18.0-rc7-Sam460ex ehci_hcd
[ 2.729913] usb usb1: SerialNumber: PPC-OF USB
[ 2.734866] hub 1-0:1.0: USB hub found
[ 2.738848] hub 1-0:1.0: 1 port detected
[ 2.743256] ehci-pci: EHCI PCI platform driver
[ 2.747951] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.754384] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 2.759130] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus n umber 2
[ 2.767059] ppc-of-ohci 4bffd0000.usb: irq 33, io mem 0x4bffd0000
[ 2.884031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.897141] ata1.00: ATAPI: ASUS DRW-24B3ST c, 1.01, max UDMA/100
[ 2.914121] ata1.00: configured for UDMA/100
[ 2.924118] scsi 0:0:0:0: CD-ROM ASUS DRW-24B3ST c 1.01 PQ : 0 ANSI: 5
[ 2.969875] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw x a/form2 cdda tray
[ 2.985006] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.997914] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.044049] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 3.172385] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 3.183008] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.200120] hub 1-1:1.0: USB hub found
[ 3.207132] hub 1-1:1.0: 7 ports detected
[ 3.315030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.358907] ata2.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 3.370007] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.389278] ata2.00: configured for UDMA/100
[ 3.408267] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ : 0 ANSI: 5
[ 3.425273] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.433157] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.442240] sd 1:0:0:0: [sda] Write Protect is off
[ 3.452375] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
[ 3.461570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.468482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 3.476790] usb usb2: Product: OF OHCI
[ 3.480614] usb usb2: Manufacturer: Linux 3.18.0-rc7-Sam460ex ohci_hcd
[ 3.487374] usb usb2: SerialNumber: PPC-OF USB
[ 3.492515] sda: RDSK (512) sda1 (SFS^@)(res 2 spb 1) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^B)(res 2 spb 1) sda4 (NTFS)(res 2 spb 2) sda5 (LNX^@)(res 2 spb 1) sda6 ((res 2 spb 1) sda7 (SWP^@)(res 2 spb 1) sda8 (LNX^@)(res 2 spb 1) sda9 (E XT^C)(res 2 spb 1) sda10 (SWP^@)(res 2 spb 1) sda11 (LNX^@)(res 2 spb 1) sda12 ( EXT^C)(res 2 spb 1) sda13 (SWP^@)(res 2 spb 1) sda14 (LNX^@)(res 2 spb 1) sda15 ((res 2 spb 1) sda16 (SWP^@)(res 2 spb 1)
[ 3.531255] usb 1-1.1: new low-speed USB device number 3 using ppc-of-ehci
[ 3.538443] hub 2-0:1.0: USB hub found
[ 3.542474] hub 2-0:1.0: 1 port detected
[ 3.546939] ohci-pci: OHCI PCI platform driver
[ 3.551804] usbcore: registered new interface driver usb-storage
[ 3.558359] usbcore: registered new interface driver usbserial
[ 3.564475] usbcore: registered new interface driver usbserial_generic
[ 3.571264] usbserial: USB Serial support registered for generic
[ 3.580381] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.585558] mousedev: PS/2 mouse device common for all mice
[ 3.591710] i2c /dev entries driver
[ 3.598532] rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
[ 3.606142] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 3.612661] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 3.619544] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-d evel@redhat.com
[ 3.628542] sdhci: Secure Digital Host Controller Interface driver
[ 3.634899] sdhci: Copyright(c) Pierre Ossman
[ 3.639495] usbcore: registered new interface driver ushc
[ 3.645179] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.651517] usbcore: registered new interface driver usbhid
[ 3.657493] usbhid: USB HID core driver
[ 3.662209] no UART detected at 0x1
[ 3.666533] ipip: IPv4 over IPv4 tunneling driver
[ 3.672181] TCP: cubic registered
[ 3.675600] usb 1-1.1: New USB device found, idVendor=04f2, idProduct=0116
[ 3.682810] Initializing XFRM netlink socket
[ 3.687266] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber =0
[ 3.695636] NET: Registered protocol family 10
[ 3.700383] usb 1-1.1: Product: USB Keyboard
[ 3.705827] sit: IPv6 over IPv4 tunneling driver
[ 3.710632] usb 1-1.1: Manufacturer: CHICONY
[ 3.715574] NET: Registered protocol family 17
[ 3.720746] NET: Registered protocol family 15
[ 3.728514] Btrfs loaded
[ 3.733768] input: CHICONY USB Keyboard as /devices/plb/4bffd0400.ehci/usb1/1 -1/1-1.1/1-1.1:1.0/0003:04F2:0116.0001/input/input0
[ 3.747186] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Key board [CHICONY USB Keyboard] on usb-PPC-OF USB-1.1/input0
[ 3.759382] rtc-m41t80 0-0068: setting system clock to 2014-12-01 07:05:19 UT C (1417417519)
[ 3.768227] ALSA device list:
[ 3.771398] No soundcards found.
[ 3.819797] EXT3-fs (sda12): mounted filesystem with ordered data mode
[ 3.826387] kjournald starting. Commit interval 5 seconds
[ 3.831927] VFS: Mounted root (ext3 filesystem) readonly on device 8:12.
[ 3.848122] usb 1-1.2: new full-speed USB device number 4 using ppc-of-ehci
[ 3.866899] devtmpfs: mounted
[ 3.870441] Freeing unused kernel memory: 240K (c074a000 - c0786000)
[ 3.943652] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 3.950830] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0
[ 3.958468] usb 1-1.2: Product: USB Receiver
[ 3.962979] usb 1-1.2: Manufacturer: Logitech
[ 3.972852] input: Logitech USB Receiver as /devices/plb/4bffd0400.ehci/usb1/ 1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0002/input/input1
[ 3.985533] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Key board [Logitech USB Receiver] on usb-PPC-OF USB-1.2/input0
[ 4.006658] input: Logitech USB Receiver as /devices/plb/4bffd0400.ehci/usb1/ 1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0003/input/input2
[ 4.019953] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Mou se [Logitech USB Receiver] on usb-PPC-OF USB-1.2/input1
[ 4.042168] hid-generic 0003:046D:C52B.0004: hidraw3: USB HID v1.11 Device [L ogitech USB Receiver] on usb-PPC-OF USB-1.2/input2
[ 4.127251] usb 1-1.7: new high-speed USB device number 5 using ppc-of-ehci
[ 4.226613] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 4.233748] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[ 4.241097] usb 1-1.7: Product: Ultra Fast Media
[ 4.246109] usb 1-1.7: Manufacturer: Generic
[ 4.250417] usb 1-1.7: SerialNumber: 000000225001
[ 4.255932] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 4.263208] scsi host2: usb-storage 1-1.7:1.0
[ 4.370246] random: nonblocking pool is initialized
[ 5.170617] udevd[910]: starting version 175
[ 5.271192] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ : 0 ANSI: 0
[ 5.284524] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.292346] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5.771523] sm501 0002:00:06.0: enabling device (0004 -> 0006)
[ 5.805233] Linux agpgart interface v0.103
[ 5.818152] sm501 0002:00:06.0: incorrect device id c0000105
[ 6.214218] [drm] Initialized drm 1.1.0 20060810
[ 7.327765] [drm] radeon kernel modesetting enabled.
[ 7.387464] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1682 :0x318B).
[ 7.443057] [drm] register mmio base: 0xe90000000
[ 7.452135] [drm] register mmio size: 131072
[ 7.675661] ATOM BIOS: TURKS
[ 7.678842] radeon 0001:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003 FFFFFFF (1024M used)
[ 7.687949] radeon 0001:81:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007F FFFFFF
[ 7.695790] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 7.700682] [drm] RAM width 128bits DDR
[ 7.704719] [TTM] Zone kernel: Available graphics memory: 380546 kiB
[ 7.711458] [TTM] Zone highmem: Available graphics memory: 1035906 kiB
[ 7.718214] [TTM] Initializing pool allocator
[ 7.722780] [TTM] Initializing DMA pool allocator
[ 7.727954] [drm] radeon: 1024M of VRAM memory ready
[ 7.733145] [drm] radeon: 1024M of GTT memory ready.
[ 7.738197] [drm] Loading TURKS Microcode
[ 7.988401] [drm] Internal thermal controller with fan control
[ 8.011376] [drm] radeon: dpm initialized
[ 8.050089] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 8.074202] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 8.081588] radeon 0001:81:00.0: WB enabled
[ 8.085818] radeon 0001:81:00.0: fence driver on ring 0 use gpu addr 0x000000 0040000c00 and cpu addr 0xffca7c00
[ 8.099161] radeon 0001:81:00.0: fence driver on ring 3 use gpu addr 0x000000 0040000c0c and cpu addr 0xffca7c0c
[ 8.131969] radeon 0001:81:00.0: fence driver on ring 5 use gpu addr 0x000000 0000072118 and cpu addr 0xf9832118
[ 8.142338] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.149721] [drm] Driver supports precise vblank timestamp query.
[ 8.156138] radeon 0001:81:00.0: radeon: MSI limited to 32-bit
[ 8.162234] radeon 0001:81:00.0: ppc4xx_setup_msi_irqs: fail mapping irq
[ 8.169182] Unable to handle kernel paging request for data at address 0x0f9a 109c
[ 8.176690] Faulting instruction address: 0xc0328d78
[ 8.181670] Vector: 300 (Data Access) at [c5cebac0]
[ 8.186560] pc: c0328d78: bitmap_clear+0x6c/0x7c
[ 8.191585] lr: c0015340: msi_bitmap_free_hwirqs+0x3c/0x80
[ 8.197489] sp: c5cebb70
[ 8.200379] msr: 21000
[ 8.203010] dar: f9a109c
[ 8.205813] dsisr: 0
[ 8.208088] current = 0xef8bcb40
[ 8.211500] pid = 974, comm = modprobe
[ 8.215799] enter ? for help
[ 8.218691] [link register ] c0015340 msi_bitmap_free_hwirqs+0x3c/0x80
[ 8.225448] [c5cebb70] c0015330 msi_bitmap_free_hwirqs+0x2c/0x80 (unreliable)
[ 8.232637] [c5cebb90] c001b298 ppc4xx_setup_msi_irqs+0xac/0xf4
[ 8.238609] [c5cebbd0] c0357a44 pci_enable_msi_range+0x1b8/0x264
[ 8.244677] [c5cebc10] f958cb7c radeon_irq_kms_init+0x180/0x1ac [radeon]
[ 8.251787] [c5cebc20] f95dca00 evergreen_startup+0x1da8/0x228c [radeon]
[ 8.258705] [c5cebc50] f95dd1e8 evergreen_init+0x260/0x328 [radeon]
[ 8.265180] [c5cebc60] f955bd94 radeon_device_init+0x8c4/0xa70 [radeon]
[ 8.271986] [c5cebc80] f955df3c radeon_driver_load_kms+0xa4/0x174 [radeon]
[ 8.279052] [c5cebca0] f92650bc drm_dev_register+0x9c/0x120 [drm]
[ 8.285259] [c5cebcc0] f92678b8 drm_get_pci_dev+0xf4/0x190 [drm]
[ 8.291353] [c5cebce0] c034855c pci_device_probe+0x78/0xd0
[ 8.296890] [c5cebd00] c039b8f4 driver_probe_device+0xdc/0x208
[ 8.302785] [c5cebd30] c039bafc __driver_attach+0x78/0xa0
[ 8.308236] [c5cebd50] c0399e3c bus_for_each_dev+0x8c/0x9c
[ 8.313774] [c5cebd80] c039b024 bus_add_driver+0xf8/0x1d4
[ 8.319226] [c5cebda0] c039bfec driver_register+0xb4/0xf8
[ 8.324677] [c5cebdc0] c00016f0 do_one_initcall+0x114/0x198
[ 8.330302] [c5cebe30] c006dfd8 load_module+0x1500/0x1b2c
[ 8.335753] [c5cebee0] c006e6e4 SyS_init_module+0xe0/0xf8
[ 8.341205] [c5cebf40] c000ad0c ret_from_syscall+0x0/0x3c
[ 8.346663] --- Exception: c01 (System Call) at 2000cc88
[ 8.352012] SP (bfcaf4e0) is in userspace
[ 8.356030] mon>
[ 10.359325] Oops: Kernel access of bad area, sig: 11 [#1]
[ 10.364736] PREEMPT Canyonlands
[ 10.367896] Modules linked in: radeon(+) cfbfillrect cfbimgblt cfbcopyarea i2 c_algo_bit drm_kms_helper ttm drm snd_cmipci snd_mpu401_uart snd_opl3_lib snd_hw dep snd_seq_device agpgart sm501
[ 10.385037] CPU: 0 PID: 974 Comm: modprobe Not tainted 3.18.0-rc7-Sam460ex #1
[ 10.392187] task: ef8bcb40 ti: c5cea000 task.ti: c5cea000
[ 10.397593] NIP: c0328d78 LR: c0015340 CTR: c0043968
[ 10.402568] REGS: c5cebac0 TRAP: 0300 Not tainted (3.18.0-rc7-Sam460ex)
[ 10.409450] MSR: 00021000 CR: 44228424 XER: 20000000
[ 10.415354] DEAR: 0f9a109c ESR: 00000000
GPR00: c0015330 c5cebb70 ef8bcb40 0f9a109c fffffff5 00000001 00000001 fffffff5
GPR08: 00000015 001fffff ffefffff c5cebb70 24ff3382 20114278 00000000 c071f974
GPR16: 200c50ec c078dcf0 c05e5c78 c078dcd4 f96a91b8 00000000 00000124 c006b8fc
GPR24: ef842d38 00000000 c08c1024 ef842800 fffffff4 ef842d38 c08c1024 00029000
[ 10.448135] NIP [c0328d78] bitmap_clear+0x6c/0x7c
[ 10.452850] LR [c0015340] msi_bitmap_free_hwirqs+0x3c/0x80
[ 10.458347] Call Trace:
[ 10.460800] [c5cebb70] [c0015330] msi_bitmap_free_hwirqs+0x2c/0x80 (unreliabl e)
[ 10.468151] [c5cebb90] [c001b298] ppc4xx_setup_msi_irqs+0xac/0xf4
[ 10.474273] [c5cebbd0] [c0357a44] pci_enable_msi_range+0x1b8/0x264
[ 10.480615] [c5cebc10] [f958cb7c] radeon_irq_kms_init+0x180/0x1ac [radeon]
[ 10.487657] [c5cebc20] [f95dca00] evergreen_startup+0x1da8/0x228c [radeon]
[ 10.494697] [c5cebc50] [f95dd1e8] evergreen_init+0x260/0x328 [radeon]
[ 10.501285] [c5cebc60] [f955bd94] radeon_device_init+0x8c4/0xa70 [radeon]
[ 10.508222] [c5cebc80] [f955df3c] radeon_driver_load_kms+0xa4/0x174 [radeon]
[ 10.515314] [c5cebca0] [f92650bc] drm_dev_register+0x9c/0x120 [drm]
[ 10.521618] [c5cebcc0] [f92678b8] drm_get_pci_dev+0xf4/0x190 [drm]
[ 10.527822] [c5cebce0] [c034855c] pci_device_probe+0x78/0xd0
[ 10.533511] [c5cebd00] [c039b8f4] driver_probe_device+0xdc/0x208
[ 10.539541] [c5cebd30] [c039bafc] __driver_attach+0x78/0xa0
[ 10.545140] [c5cebd50] [c0399e3c] bus_for_each_dev+0x8c/0x9c
[ 10.550826] [c5cebd80] [c039b024] bus_add_driver+0xf8/0x1d4
[ 10.556424] [c5cebda0] [c039bfec] driver_register+0xb4/0xf8
[ 10.562023] [c5cebdc0] [c00016f0] do_one_initcall+0x114/0x198
[ 10.567795] [c5cebe30] [c006dfd8] load_module+0x1500/0x1b2c
[ 10.573394] [c5cebee0] [c006e6e4] SyS_init_module+0xe0/0xf8
[ 10.578993] [c5cebf40] [c000ad0c] ret_from_syscall+0x0/0x3c
[ 10.584593] --- interrupt: c01 at 0x2000cc88
[ 10.584593] LR = 0x200ba7e0
[ 10.592002] Instruction dump:
[ 10.594989] 3940ffff 4bffffdc 2f890000 4d9e0020 7c842a14 3920ffff 7088001f 41 820010
[ 10.602870] 39200001 7d294030 3929ffff 7d2a53b8 7d295038 91230000 4e800020
[ 10.610929] ---[ end trace e06932fd243d02c8 ]---
[ 10.615552]
[ 10.617049] note: modprobe[974] exited with preempt_count 1
[ 12.904436] Adding 62828k swap on /dev/sda13. Priority:-1 extents:1 across:6 2828k FS
[ 13.493696] EXT3-fs (sda12): using internal journal
[ 17.218057] eth0: link is up, 100 FDX, pause enabled
[ 22.290760] Program Xorg tried to access /dev/mem between 8000000->8020000.
[ 22.537489] Bluetooth: Core ver 2.19
[ 22.542706] NET: Registered protocol family 31
[ 22.547218] Bluetooth: HCI device and connection manager initialized
[ 22.553944] Bluetooth: HCI socket layer initialized
[ 22.558879] Bluetooth: L2CAP socket layer initialized
[ 22.564312] Bluetooth: SCO socket layer initialized
[ 22.588112] Bluetooth: RFCOMM TTY layer initialized
[ 22.596654] Bluetooth: RFCOMM socket layer initialized
[ 22.602714] Bluetooth: RFCOMM ver 1.11
[ 22.609283] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.616327] Bluetooth: BNEP filters: protocol multicast
[ 22.624478] Bluetooth: BNEP socket layer initialized
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
User avatar
xeno74
Posts: 6812
Joined: Fri Mar 23, 2012 7:58 am

Re: Spectre660's Linux downloads for the Sam440/460

Post by xeno74 »

@Spectre660

Could you add the support and firmwares for radeon graphics cards to the kernel, please? I think there is problem with loading the radeon kernel module.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Spectre660
Posts: 1502
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Thanks. Will try.
xeno74 wrote:@Spectre660

Could you add the support and firmwares for radeon graphics cards to the kernel, please? I think there is problem with loading the radeon kernel module.
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Post Reply