Kernel 5.12
Re: Kernel 5.12
Hi Peter,
Many thanks for your nice screenshot!
It’s good to know that the RC6 works on your X1000.
Cheers,
Christian
Many thanks for your nice screenshot!
It’s good to know that the RC6 works on your X1000.
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.12
Hi All,
I released the RC7 of kernel 5.12 for testing today.
New:
Please test the kernels.
Thanks,
Christian
I released the RC7 of kernel 5.12 for testing today.
New:
- Linux 5.12-rc7 Kernel Released - It's Big And Causing Some Concern -- phoronix.com
- PowerPC fixes 5.12-6
- Radeon ttm overflow fix (ttm = memory management)
- Linux 5.12-rc7 announcement
- Linux Git log
- Phoronix articles, reviews and news stories covering Linux 5.12
Please test the kernels.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.12
Hi Christian
I have tried to boot kernel 5.12 rc7 but the kernel can not identify sata 4 (my linux hard drive).
Have new formatted my usbdisk with Fat 16. no luck. When I afterwards start the same partition with kernel 5.11 all errors are gone. Therefore, I believe that it is the kernel that is the problem.
Have a nice day
Peter
I have tried to boot kernel 5.12 rc7 but the kernel can not identify sata 4 (my linux hard drive).
Have new formatted my usbdisk with Fat 16. no luck. When I afterwards start the same partition with kernel 5.11 all errors are gone. Therefore, I believe that it is the kernel that is the problem.
Have a nice day
Peter
AmigaX1000
Re: Kernel 5.12
Does sata 4 work with the RC6?
Could you please post some error messages?
Strange, I don't have sata 4. I have sata 0 - 3. Do you mean sata 3? Maybe you mean ata4 because sata 3 on the Nemo board is ata4 on Linux. I can boot from ata4.
dmesg | grep -i sata
Code: Select all
[ 0.066651] pci 0000:05:12.0: set SATA to AHCI mode
[ 2.520150] ahci 0000:05:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.524245] ata1: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209100 irq 9
[ 2.524741] ata2: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209180 irq 9
[ 2.525216] ata3: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209200 irq 9
[ 2.525702] ata4: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209280 irq 9
[ 2.834800] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.872168] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.910367] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.948957] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Please post the output of dmesg | grep sdc.
Thanks a lot for testing!
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.12
xeno74 wrote: ↑Tue Apr 13, 2021 8:05 am
Does sata 4 work with the RC6?
yes
Could you please post some error messages?
Sorry cat inset pic.
Strange, I don't have sata 4. I have sata 0 - 3. Do you mean sata 3? Maybe you mean ata4 because sata 3 on the Nemo board is ata4 on Linux. I can boot from ata4.
yes I mean ata
dmesg | grep -i sata
I think your Linux partitions are on sdc.Code: Select all
[ 0.066651] pci 0000:05:12.0: set SATA to AHCI mode [ 2.520150] ahci 0000:05:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.524245] ata1: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209100 irq 9 [ 2.524741] ata2: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209180 irq 9 [ 2.525216] ata3: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209200 irq 9 [ 2.525702] ata4: SATA max UDMA/133 abar m1024@0xa0209000 port 0xa0209280 irq 9 [ 2.834800] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.872168] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.910367] ata2: SATA link down (SStatus 0 SControl 300) [ 2.948957] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Please post the output of dmesg | grep sdc.
Thanks a lot for testing!
Code: Select all
root@debian:~# dmesg | grep sdc
[ 0.000000] Kernel command line: root=/dev/sdc5
[ 4.334604] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 4.354140] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 4.436481] sd 3:0:0:0: [sdc] Write Protect is off
[ 4.553894] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.573968] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.690494] sdc: RDSK (512) sdc1 ((res 2 spb 2) sdc2 ((res 2 spb 2) sdc3 ((res 2 spb 2) sdc4 ((res 2 spb 2) sdc5 ((res 2 spb 2) sdc6 ((res 2 spb 2) sdc7 (NTFS)(res 2 spb 2) sdc8 (SFS^B)(res 2 spb 1) sdc9 (SFS^B)(res 2 spb 1) sdc10 (SWP^@)(res 2 spb 2)
[ 4.791075] sdc: p10 start 18446744073267761040 is beyond EOD, enabling native capacity
[ 4.831730] sdc: RDSK (512) sdc1 ((res 2 spb 2) sdc2 ((res 2 spb 2) sdc3 ((res 2 spb 2) sdc4 ((res 2 spb 2) sdc5 ((res 2 spb 2) sdc6 ((res 2 spb 2) sdc7 (NTFS)(res 2 spb 2) sdc8 (SFS^B)(res 2 spb 1) sdc9 (SFS^B)(res 2 spb 1) sdc10 (SWP^@)(res 2 spb 2)
[ 4.874087] sdc: p10 start 18446744073267761040 is beyond EOD, truncated
[ 4.913055] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 6.778143] EXT4-fs (sdc5): INFO: recovery required on readonly filesystem
[ 6.807189] EXT4-fs (sdc5): write access will be enabled during recovery
[ 7.231566] EXT4-fs (sdc5): recovery complete
[ 7.300683] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 14.685793] EXT4-fs (sdc5): re-mounted. Opts: errors=remount-ro. Quota mode: disabled.
root@debian:~#
Peter
AmigaX1000
Re: Kernel 5.12
Hi Peter,
Strange because I can boot from sata 3 (ata 4). I need some error messages for solving the issue.
Please boot with the RC7. After that with the RC6.
Please post the outputs of the following commands:
Thanks,
Christian
Strange because I can boot from sata 3 (ata 4). I need some error messages for solving the issue.
Please boot with the RC7. After that with the RC6.
Please post the outputs of the following commands:
Code: Select all
# grep -i "Linux version" /var/log/kern.log
# grep -i sata /var/log/kern.log
# grep -i sdc /var/log/kern.log
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.12
Hi Christianxeno74 wrote: ↑Tue Apr 13, 2021 9:52 am Hi Peter,
Strange because I can boot from sata 3 (ata 4). I need some error messages for solving the issue.
Please boot with the RC7. After that with the RC6.
Please post the outputs of the following commands:
Thanks,Code: Select all
# grep -i "Linux version" /var/log/kern.log # grep -i sata /var/log/kern.log # grep -i sdc /var/log/kern.log
Christian
Just a question. Is it the disk sdc or the partition sdc5
AmigaX1000
Re: Kernel 5.12
Disk sdc for the grep command. For the boot args you need "root=/dev/sdc5".
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.12
Hi Christian
yes right now i am in the strange situation that both mint and fedora boot on 5.12 / rc7 completely without error.
I have some time ago made the discovery that my power cables to my hard drive have periodic problems supplying power.
I have tried to change the cables and have not had those problems since but there could be a connection.
Just weird for the error was not there when I used my kernel 5.11.
But as it is now Mintppc boot and Fedora boot without any problems
Have a nice day
yes right now i am in the strange situation that both mint and fedora boot on 5.12 / rc7 completely without error.
I have some time ago made the discovery that my power cables to my hard drive have periodic problems supplying power.
I have tried to change the cables and have not had those problems since but there could be a connection.
Just weird for the error was not there when I used my kernel 5.11.
But as it is now Mintppc boot and Fedora boot without any problems
Have a nice day
AmigaX1000
Re: Kernel 5.12
Good to know. What about to buy a new power supply?musa wrote: ↑Tue Apr 13, 2021 10:47 am Hi Christian
yes right now i am in the strange situation that both mint and fedora boot on 5.12 / rc7 completely without error.
I have some time ago made the discovery that my power cables to my hard drive have periodic problems supplying power.
I have tried to change the cables and have not had those problems since but there could be a connection.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.