Fienix - New PowerPC Distro

AmigaOne X1000 platform specific issues related to Linux only.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Fienix - New PowerPC Distro

Post by xeno74 »

Musa,

Does SuperTuxKart work?

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
musa
Posts: 710
Joined: Tue Aug 23, 2011 7:58 pm

Re: Fienix - New PowerPC Distro

Post by musa »

xeno74 wrote:Musa,

Does SuperTuxKart work?

Cheers,
Christian
Its start with some lag and 2 to 3 min. after it break down.
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
sailorMH
Posts: 230
Joined: Wed Aug 28, 2013 6:01 pm
Location: Czech republic

Re: Fienix - New PowerPC Distro

Post by sailorMH »

xeno74 wrote:
Please post the output of dmesg if you run Fienix. Maybe there are some messages about your CF card in the dmesg output.
Hi Christian,

here is dmesg (first 10sec )- i don't finy anything regarding cfcard

Code: Select all

[    0.000000] hash-mmu: Page sizes from device-tree:
[    0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
[    0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=3
[    0.000000] hash-mmu: base_shift=20: shift=20, sllp=0x0030, avpnm=0x00000000, tlbiel=0, penc=31
[    0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
[    0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12
[    0.000000] Using 1TB segments
[    0.000000] hash-mmu: Initializing hash mmu with SLB
[    0.000000] Linux version 4.19.3_A-EON_AmigaOne_X1000_Nemo (christian@AmigaoneX1000) (gcc version 6.3.0 20170618 (Debian 6.3.0-19)) #1 SMP Thu Nov 22 06:53:32 CET 2018
[    0.000000] IOBMAP L2 allocated at: (____ptrval____)
[    0.000000] Using A-EON Amigaone X1000 machine description
[    0.000000] Found legacy serial port 0 for /pxp@0,e0000000/serial@1d
[    0.000000]   port=7f03f8, taddr=fcff03f8, irq=0, clk=133333333, speed=115200
[    0.000000] Found legacy serial port 1 for /pxp@0,e0000000/serial@1d,1
[    0.000000]   port=7f02f8, taddr=fcff02f8, irq=0, clk=133333333, speed=115200
[    0.000000] CPU maps initialized for 1 thread per core
[    0.000000]  (thread shift is 0)
[    0.000000] Allocated 2192 bytes for 2 pacas
[    0.000000] -----------------------------------------------------
[    0.000000] ppc64_pft_size    = 0x0
[    0.000000] phys_mem_size     = 0x100000000
[    0.000000] dcache_bsize      = 0x40
[    0.000000] icache_bsize      = 0x40
[    0.000000] cpu_features      = 0x00000100004011a2
[    0.000000]   possible        = 0x0000fbefffffb1af
[    0.000000]   always          = 0x00000000000001a0
[    0.000000] cpu_user_features = 0xdc000802 0x00000000
[    0.000000] mmu_features      = 0x6e000001
[    0.000000] firmware_features = 0x0000000000000000
[    0.000000] htab_address      = 0x(____ptrval____)
[    0.000000] htab_hash_mask    = 0x7ffff
[    0.000000] -----------------------------------------------------
[    0.000000] Found PA-PXP PCI host bridge.
[    0.000000] PCI host bridge /pxp@0,e0000000 (primary) ranges:
[    0.000000]   IO 0x00000000fc800000..0x00000000fcffffff -> 0x0000000000000000
[    0.000000]  MEM 0x0000000080000000..0x00000000e00fffff -> 0x0000000080000000 
[    0.000000]  MEM 0x00000000fd800000..0x00000000fd800fff -> 0x00000000fd800000 
[    0.000000]  MEM 0x0000080000000000..0x00000bffffffffff -> 0x0000080000000000 
[    0.000000] no ISA IO ranges or unexpected isa range, mapping 64k
[    0.000000] ISA bridge (early) is /pxp@0,e0000000/io-bridge@0
[    0.000000] barrier-nospec: using ORI speculation barrier
[    0.000000] barrier-nospec: patched 570 locations
[    0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
[    0.000000] Memory hole size: 2048MB
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1048576
[    0.000000]   DMA zone: 21504 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 1048576 pages, LIFO batch:63
[    0.000000] percpu: Embedded 27 pages/cpu @(____ptrval____) s73240 r0 d37352 u524288
[    0.000000] pcpu-alloc: s73240 r0 d37352 u524288 alloc=1*1048576
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027072
[    0.000000] Kernel command line: root=/dev/sdb6
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 4006360K/4194304K available (15504K kernel code, 2480K rwdata, 7104K rodata, 1004K init, 1600K bss, 187944K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 37818 entries in 223 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs
[    0.000000] mpic: ISU size: 1024, shift: 10, mask: 3ff
[    0.000000] mpic: Initializing for 1024 sources
[    0.000000] i8259 legacy interrupt controller initialized
[    0.000000] time_init: decrementer frequency = 66.666666 MHz
[    0.000000] time_init: processor frequency   = 1800.000000 MHz
[    0.000004] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns
[    0.000009] clocksource: timebase mult[f000003] shift[24] registered
[    0.000013] clockevent: decrementer mult[1111110e] shift[32] cpu[0]
[    0.000217] Console: colour dummy device 80x25
[    0.000431] console [tty0] enabled
[    0.000443] pid_max: default: 32768 minimum: 301
[    0.000562] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000596] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001055] mpic: requesting IPIs...
[    0.001400] rcu: Hierarchical SRCU implementation.
[    0.001654] smp: Bringing up secondary CPUs ...
[    0.002106] smp: Brought up 1 node, 2 CPUs
[    0.002295] Using standard scheduler topology
[    0.002561] devtmpfs: initialized
[    0.004478] random: get_random_u32 called from .bucket_table_alloc+0xa8/0x240 with crng_init=0
[    0.004814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.004831] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.004932] xor: measuring software checksum speed
[    0.014094]    8regs     :  3380.000 MB/sec
[    0.024121]    8regs_prefetch:  3112.000 MB/sec
[    0.034148]    32regs    :  3512.000 MB/sec
[    0.044176]    32regs_prefetch:  3112.000 MB/sec
[    0.054205]    altivec   :  5516.000 MB/sec
[    0.054213] xor: using function: altivec (5516.000 MB/sec)
[    0.054338] NET: Registered protocol family 16
[    0.055793] PCI: Probing PCI hardware
[    0.056043] PCI host bridge to bus 0000:00
[    0.056058] pci_bus 0000:00: root bus resource [io  0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
[    0.056070] pci_bus 0000:00: root bus resource [mem 0x80000000-0xe00fffff]
[    0.056078] pci_bus 0000:00: root bus resource [mem 0xfd800000-0xfd800fff]
[    0.056086] pci_bus 0000:00: root bus resource [mem 0x80000000000-0xbffffffffff]
[    0.056096] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.056106] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    0.056109] pci_bus 0000:00: scanning bus
[    0.056133] NEMO SB600 IOB base e0000000
[    0.056160] pci 0000:00:00.0: [1959:a001] type 00 class 0x060000
[    0.056263] ISA bridge PCI attached: 0000:00:00.0
[    0.056363] pci 0000:00:01.0: [1959:a009] type 00 class 0x058000
[    0.056561] pci 0000:00:03.0: [1959:a00c] type 00 class 0x080080
[    0.056731] pci 0000:00:04.0: [1959:a00a] type 00 class 0x050000
[    0.056903] pci 0000:00:05.0: [1959:a00a] type 00 class 0x050000
[    0.057126] pci 0000:00:08.0: [1959:a000] type 00 class 0x0b2000
[    0.057302] pci 0000:00:09.0: [1959:a000] type 00 class 0x0b2000
[    0.057590] pci 0000:00:10.0: [1959:a002] type 01 class 0x060400
[    0.057619] pci 0000:00:10.0: enabling Extended Tags
[    0.057658] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.057663] pci 0000:00:10.0: PME# disabled
[    0.057797] pci 0000:00:10.1: [1959:a002] type 01 class 0x060400
[    0.057826] pci 0000:00:10.1: enabling Extended Tags
[    0.057863] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.057867] pci 0000:00:10.1: PME# disabled
[    0.057998] pci 0000:00:10.2: [1959:a002] type 01 class 0x060400
[    0.058026] pci 0000:00:10.2: enabling Extended Tags
[    0.058062] pci 0000:00:10.2: PME# supported from D0 D3hot D3cold
[    0.058067] pci 0000:00:10.2: PME# disabled
[    0.058195] pci 0000:00:10.3: [1959:a002] type 01 class 0x060400
[    0.058233] pci 0000:00:10.3: enabling Extended Tags
[    0.058270] pci 0000:00:10.3: PME# supported from D0 D3hot D3cold
[    0.058274] pci 0000:00:10.3: PME# disabled
[    0.058429] pci 0000:00:11.0: [1959:a002] type 01 class 0x060400
[    0.058457] pci 0000:00:11.0: enabling Extended Tags
[    0.058494] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[    0.058498] pci 0000:00:11.0: PME# disabled
[    0.058629] pci 0000:00:11.1: [1959:a002] type 01 class 0x060400
[    0.058657] pci 0000:00:11.1: enabling Extended Tags
[    0.058694] pci 0000:00:11.1: PME# supported from D0 D3hot D3cold
[    0.058698] pci 0000:00:11.1: PME# disabled
[    0.058830] pci 0000:00:11.2: [1959:a002] type 01 class 0x060400
[    0.058858] pci 0000:00:11.2: enabling Extended Tags
[    0.058895] pci 0000:00:11.2: PME# supported from D0 D3hot D3cold
[    0.058899] pci 0000:00:11.2: PME# disabled
[    0.059030] pci 0000:00:11.3: [1959:a002] type 01 class 0x060400
[    0.059058] pci 0000:00:11.3: enabling Extended Tags
[    0.059093] pci 0000:00:11.3: PME# supported from D0 D3hot D3cold
[    0.059098] pci 0000:00:11.3: PME# disabled
[    0.059313] pci 0000:00:14.0: [1959:a005] type 00 class 0x020000
[    0.059454] pci 0000:00:14.1: [1959:a005] type 00 class 0x020000
[    0.059598] pci 0000:00:14.2: [1959:a005] type 00 class 0x020000
[    0.059735] pci 0000:00:14.3: [1959:a005] type 00 class 0x020000
[    0.059912] pci 0000:00:15.0: [1959:a006] type 00 class 0x020000
[    0.060054] pci 0000:00:15.1: [1959:a006] type 00 class 0x020000
[    0.060310] pci 0000:00:1a.0: [1959:a007] type 00 class 0x0801ff
[    0.060490] pci 0000:00:1b.0: [1959:a00b] type 00 class 0x088000
[    0.060670] pci 0000:00:1c.0: [1959:a003] type 00 class 0x0c0500
[    0.060684] pci 0000:00:1c.0: reg 0x10: [io  0x800200-0x80023f]
[    0.060823] pci 0000:00:1c.1: [1959:a003] type 00 class 0x0c0500
[    0.060837] pci 0000:00:1c.1: reg 0x10: [io  0x800240-0x80027f]
[    0.060975] pci 0000:00:1c.2: [1959:a003] type 00 class 0x0c0500
[    0.060989] pci 0000:00:1c.2: reg 0x10: [io  0x800280-0x8002bf]
[    0.061157] pci 0000:00:1d.0: [1959:a004] type 00 class 0x070003
[    0.061170] pci 0000:00:1d.0: reg 0x10: [io  0x8003f8-0x8003ff]
[    0.061324] pci 0000:00:1d.1: [1959:a004] type 00 class 0x070003
[    0.061338] pci 0000:00:1d.1: reg 0x10: [io  0x8002f8-0x8002ff]
[    0.061514] pci 0000:00:1e.0: [1959:a008] type 00 class 0x0601ff
[    0.061528] pci 0000:00:1e.0: reg 0x10: [io  0x800400-0x8004ff]
[    0.061536] pci 0000:00:1e.0: reg 0x14: [io  0x800500-0x8005ff]
[    0.061706] pci_bus 0000:00: fixups for bus
[    0.105428] IOMMU table initialized, virtual merging enabled
[    0.105856] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 0
[    0.105991] pci_bus 0000:01: scanning bus
[    0.106016] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
[    0.106047] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.106060] pci 0000:01:00.0: reg 0x18: [mem 0xa0000000-0xa003ffff 64bit]
[    0.106069] pci 0000:01:00.0: reg 0x20: [io  0x12000-0x120ff]
[    0.106083] pci 0000:01:00.0: reg 0x30: [mem 0xa0040000-0xa005ffff pref]
[    0.106092] pci 0000:01:00.0: enabling Extended Tags
[    0.106157] pci 0000:01:00.0: supports D1 D2
[    0.106161] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.106166] pci 0000:01:00.0: PME# disabled
[    0.106188] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:10.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.106345] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[    0.106371] pci 0000:01:00.1: reg 0x10: [mem 0xa0060000-0xa0063fff 64bit]
[    0.106404] pci 0000:01:00.1: enabling Extended Tags
[    0.106469] pci 0000:01:00.1: supports D1 D2
[    0.110147] pci_bus 0000:01: fixups for bus
[    0.110152] pci 0000:00:10.0: PCI bridge to [bus 01]
[    0.110166] pci 0000:00:10.0:   bridge window [io  0x12000-0x12fff]
[    0.110171] pci 0000:00:10.0:   bridge window [mem 0x90000000-0xa00fffff]
[    0.110228] pci_bus 0000:01: bus scan returning with max=01
[    0.110235] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 0
[    0.110328] pci_bus 0000:02: scanning bus
[    0.110989] pci_bus 0000:02: fixups for bus
[    0.110993] pci 0000:00:10.1: PCI bridge to [bus 02]
[    0.111010] pci_bus 0000:02: bus scan returning with max=02
[    0.111016] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 0
[    0.111106] pci_bus 0000:03: scanning bus
[    0.111764] pci_bus 0000:03: fixups for bus
[    0.111769] pci 0000:00:10.2: PCI bridge to [bus 03]
[    0.111785] pci_bus 0000:03: bus scan returning with max=03
[    0.111791] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 0
[    0.111880] pci_bus 0000:04: scanning bus
[    0.112537] pci_bus 0000:04: fixups for bus
[    0.112542] pci 0000:00:10.3: PCI bridge to [bus 04]
[    0.112558] pci_bus 0000:04: bus scan returning with max=04
[    0.112564] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 0
[    0.112652] pci_bus 0000:05: scanning bus
[    0.113048] pci 0000:05:12.0: [1002:4380] type 00 class 0x01018f
[    0.113074] pci 0000:05:12.0: reg 0x10: [io  0x11040-0x11047]
[    0.113085] pci 0000:05:12.0: reg 0x14: [io  0x1105c-0x1105f]
[    0.113096] pci 0000:05:12.0: reg 0x18: [io  0x11048-0x1104f]
[    0.113107] pci 0000:05:12.0: reg 0x1c: [io  0x11058-0x1105b]
[    0.113118] pci 0000:05:12.0: reg 0x20: [io  0x11010-0x1101f]
[    0.113129] pci 0000:05:12.0: reg 0x24: [mem 0xa0209400-0xa02097ff]
[    0.113152] pci 0000:05:12.0: set SATA to AHCI mode
[    0.113342] pci 0000:05:13.0: [1002:4387] type 00 class 0x0c0310
[    0.113364] pci 0000:05:13.0: reg 0x10: [mem 0xa0208000-0xa0208fff]
[    0.113549] pci 0000:05:13.1: [1002:4388] type 00 class 0x0c0310
[    0.113570] pci 0000:05:13.1: reg 0x10: [mem 0xa0207000-0xa0207fff]
[    0.113740] pci 0000:05:13.2: [1002:4389] type 00 class 0x0c0310
[    0.113762] pci 0000:05:13.2: reg 0x10: [mem 0xa0206000-0xa0206fff]
[    0.113933] pci 0000:05:13.3: [1002:438a] type 00 class 0x0c0310
[    0.113955] pci 0000:05:13.3: reg 0x10: [mem 0xa0204000-0xa0204fff]
[    0.114124] pci 0000:05:13.4: [1002:438b] type 00 class 0x0c0310
[    0.114146] pci 0000:05:13.4: reg 0x10: [mem 0xa0205000-0xa0205fff]
[    0.114320] pci 0000:05:13.5: [1002:4386] type 00 class 0x0c0320
[    0.114345] pci 0000:05:13.5: reg 0x10: [mem 0xa0209800-0xa02098ff]
[    0.114428] pci 0000:05:13.5: supports D1 D2
[    0.114431] pci 0000:05:13.5: PME# supported from D0 D1 D2 D3hot
[    0.114436] pci 0000:05:13.5: PME# disabled
[    0.114600] pci 0000:05:14.0: [1002:4385] type 00 class 0x0c0500
[    0.114620] pci 0000:05:14.0: reg 0x10: [io  0x11020-0x1102f]
[    0.114631] pci 0000:05:14.0: reg 0x14: [mem 0xa0209000-0xa02093ff]
[    0.114794] pci 0000:05:14.1: [1002:438c] type 00 class 0x010183
[    0.114815] pci 0000:05:14.1: reg 0x10: [io  0x11030-0x11037]
[    0.114826] pci 0000:05:14.1: reg 0x14: [io  0x11054-0x11057]
[    0.114837] pci 0000:05:14.1: reg 0x18: [io  0x11038-0x1103f]
[    0.114848] pci 0000:05:14.1: reg 0x1c: [io  0x11050-0x11053]
[    0.114859] pci 0000:05:14.1: reg 0x20: [io  0x11000-0x1100f]
[    0.114881] pci 0000:05:14.1: legacy IDE quirk: reg 0x18: [io  0x10170-0x10177]
[    0.114892] pci 0000:05:14.1: legacy IDE quirk: reg 0x1c: [io  0x10376]
[    0.115027] pci 0000:05:14.2: [1002:4383] type 00 class 0x040300
[    0.115056] pci 0000:05:14.2: reg 0x10: [mem 0xa0200000-0xa0203fff 64bit]
[    0.115125] pci 0000:05:14.2: PME# supported from D0 D3hot D3cold
[    0.115130] pci 0000:05:14.2: PME# disabled
[    0.115251] pci 0000:05:14.3: [1002:438d] type 00 class 0x060100
[    0.115446] pci 0000:05:14.4: [1002:4384] type 01 class 0x060400
[    0.115864] pci_bus 0000:05: fixups for bus
[    0.115869] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[    0.115882] pci 0000:00:11.0:   bridge window [io  0x10000-0x13fff]
[    0.115887] pci 0000:00:11.0:   bridge window [mem 0xa0100000-0xa03fffff]
[    0.115942] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 0
[    0.115957] pci_bus 0000:06: extended config space not accessible
[    0.116035] pci_bus 0000:06: scanning bus
[    0.116189] pci 0000:06:06.0: [10ec:8139] type 00 class 0x020000
[    0.116213] pci 0000:06:06.0: reg 0x10: [io  0x13000-0x130ff]
[    0.116227] pci 0000:06:06.0: reg 0x14: [mem 0xa0320000-0xa03200ff]
[    0.116280] pci 0000:06:06.0: reg 0x30: [mem 0xa0300000-0xa031ffff pref]
[    0.116321] pci 0000:06:06.0: supports D1 D2
[    0.116324] pci 0000:06:06.0: PME# supported from D1 D2 D3hot
[    0.116330] pci 0000:06:06.0: PME# disabled
[    0.116994] pci_bus 0000:06: fixups for bus
[    0.116998] pci 0000:05:14.4: PCI bridge to [bus 06]
[    0.117012] pci 0000:05:14.4:   bridge window [io  0x13000-0x13fff]
[    0.117018] pci 0000:05:14.4:   bridge window [mem 0xa0300000-0xa03fffff]
[    0.117030] pci_bus 0000:06: bus scan returning with max=06
[    0.117037] pci 0000:05:14.4: scanning [bus 06-06] behind bridge, pass 1
[    0.117043] pci_bus 0000:05: bus scan returning with max=06
[    0.117050] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 0
[    0.117139] pci_bus 0000:07: scanning bus
[    0.117790] pci_bus 0000:07: fixups for bus
[    0.117795] pci 0000:00:11.1: PCI bridge to [bus 07]
[    0.117811] pci_bus 0000:07: bus scan returning with max=07
[    0.117818] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 0
[    0.117911] pci_bus 0000:08: scanning bus
[    0.118550] pci_bus 0000:08: fixups for bus
[    0.118554] pci 0000:00:11.2: PCI bridge to [bus 08]
[    0.118582] pci_bus 0000:08: bus scan returning with max=08
[    0.118589] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 0
[    0.118682] pci_bus 0000:09: scanning bus
[    0.119319] pci_bus 0000:09: fixups for bus
[    0.119324] pci 0000:00:11.3: PCI bridge to [bus 09]
[    0.119340] pci_bus 0000:09: bus scan returning with max=09
[    0.119348] pci 0000:00:10.0: scanning [bus 01-01] behind bridge, pass 1
[    0.119355] pci 0000:00:10.1: scanning [bus 02-02] behind bridge, pass 1
[    0.119361] pci 0000:00:10.2: scanning [bus 03-03] behind bridge, pass 1
[    0.119367] pci 0000:00:10.3: scanning [bus 04-04] behind bridge, pass 1
[    0.119374] pci 0000:00:11.0: scanning [bus 05-06] behind bridge, pass 1
[    0.119380] pci 0000:00:11.1: scanning [bus 07-07] behind bridge, pass 1
[    0.119386] pci 0000:00:11.2: scanning [bus 08-08] behind bridge, pass 1
[    0.119393] pci 0000:00:11.3: scanning [bus 09-09] behind bridge, pass 1
[    0.119398] pci_bus 0000:00: bus scan returning with max=09
[    0.119404] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[    0.119594] PCI 0000:00 Cannot reserve Legacy IO [io  0x10000-0x10fff]
[    0.119609] pci 0000:00:10.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.119636] pci 0000:00:11.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-06] add_size 200000 add_align 100000
[    0.119645] pci 0000:00:11.1: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.119650] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[    0.119656] pci 0000:00:11.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
[    0.119664] pci 0000:00:11.2: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.119670] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
[    0.119677] pci 0000:00:11.2: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
[    0.119685] pci 0000:00:11.3: bridge window [io  0x1000-0x0fff] to [bus 09] add_size 1000
[    0.119691] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
[    0.119696] pci 0000:00:11.3: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000
[    0.119723] pci 0000:00:10.0: BAR 9: assigned [mem 0x80000000000-0x800001fffff 64bit pref]
[    0.119738] pci 0000:00:11.0: BAR 9: assigned [mem 0x80000200000-0x800003fffff 64bit pref]
[    0.119749] pci 0000:00:11.1: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.119760] pci 0000:00:11.1: BAR 9: assigned [mem 0x80000400000-0x800005fffff 64bit pref]
[    0.119771] pci 0000:00:11.2: BAR 8: assigned [mem 0x80200000-0x803fffff]
[    0.119782] pci 0000:00:11.2: BAR 9: assigned [mem 0x80000600000-0x800007fffff 64bit pref]
[    0.119792] pci 0000:00:11.3: BAR 8: assigned [mem 0x80400000-0x805fffff]
[    0.119803] pci 0000:00:11.3: BAR 9: assigned [mem 0x80000800000-0x800009fffff 64bit pref]
[    0.119813] pci 0000:00:11.1: BAR 7: assigned [io  0x14000-0x14fff]
[    0.119823] pci 0000:00:11.2: BAR 7: assigned [io  0x15000-0x15fff]
[    0.119832] pci 0000:00:11.3: BAR 7: assigned [io  0x16000-0x16fff]
[    0.119846] pci 0000:00:10.0: PCI bridge to [bus 01]
[    0.119855] pci 0000:00:10.0:   bridge window [io  0x12000-0x12fff]
[    0.119865] pci 0000:00:10.0:   bridge window [mem 0x90000000-0xa00fffff]
[    0.119874] pci 0000:00:10.0:   bridge window [mem 0x80000000000-0x800001fffff 64bit pref]
[    0.119885] pci 0000:00:10.1: PCI bridge to [bus 02]
[    0.119896] pci 0000:00:10.2: PCI bridge to [bus 03]
[    0.119907] pci 0000:00:10.3: PCI bridge to [bus 04]
[    0.119922] pci 0000:05:14.4: PCI bridge to [bus 06]
[    0.119931] pci 0000:05:14.4:   bridge window [io  0x13000-0x13fff]
[    0.119941] pci 0000:05:14.4:   bridge window [mem 0xa0300000-0xa03fffff]
[    0.119954] pci 0000:00:11.0: PCI bridge to [bus 05-06]
[    0.119963] pci 0000:00:11.0:   bridge window [io  0x10000-0x13fff]
[    0.119972] pci 0000:00:11.0:   bridge window [mem 0xa0100000-0xa03fffff]
[    0.119981] pci 0000:00:11.0:   bridge window [mem 0x80000200000-0x800003fffff 64bit pref]
[    0.119992] pci 0000:00:11.1: PCI bridge to [bus 07]
[    0.120000] pci 0000:00:11.1:   bridge window [io  0x14000-0x14fff]
[    0.120009] pci 0000:00:11.1:   bridge window [mem 0x80000000-0x801fffff]
[    0.120018] pci 0000:00:11.1:   bridge window [mem 0x80000400000-0x800005fffff 64bit pref]
[    0.120029] pci 0000:00:11.2: PCI bridge to [bus 08]
[    0.120037] pci 0000:00:11.2:   bridge window [io  0x15000-0x15fff]
[    0.120046] pci 0000:00:11.2:   bridge window [mem 0x80200000-0x803fffff]
[    0.120055] pci 0000:00:11.2:   bridge window [mem 0x80000600000-0x800007fffff 64bit pref]
[    0.120066] pci 0000:00:11.3: PCI bridge to [bus 09]
[    0.120074] pci 0000:00:11.3:   bridge window [io  0x16000-0x16fff]
[    0.120083] pci 0000:00:11.3:   bridge window [mem 0x80400000-0x805fffff]
[    0.120092] pci 0000:00:11.3:   bridge window [mem 0x80000800000-0x800009fffff 64bit pref]
[    0.120107] pci_bus 0000:00: resource 4 [io  0x10000-0x80ffff]
[    0.120111] pci_bus 0000:00: resource 5 [mem 0x80000000-0xe00fffff]
[    0.120115] pci_bus 0000:00: resource 6 [mem 0xfd800000-0xfd800fff]
[    0.120119] pci_bus 0000:00: resource 7 [mem 0x80000000000-0xbffffffffff]
[    0.120123] pci_bus 0000:01: resource 0 [io  0x12000-0x12fff]
[    0.120126] pci_bus 0000:01: resource 1 [mem 0x90000000-0xa00fffff]
[    0.120131] pci_bus 0000:01: resource 2 [mem 0x80000000000-0x800001fffff 64bit pref]
[    0.120135] pci_bus 0000:05: resource 0 [io  0x10000-0x13fff]
[    0.120139] pci_bus 0000:05: resource 1 [mem 0xa0100000-0xa03fffff]
[    0.120143] pci_bus 0000:05: resource 2 [mem 0x80000200000-0x800003fffff 64bit pref]
[    0.120147] pci_bus 0000:06: resource 0 [io  0x13000-0x13fff]
[    0.120151] pci_bus 0000:06: resource 1 [mem 0xa0300000-0xa03fffff]
[    0.120155] pci_bus 0000:07: resource 0 [io  0x14000-0x14fff]
[    0.120158] pci_bus 0000:07: resource 1 [mem 0x80000000-0x801fffff]
[    0.120162] pci_bus 0000:07: resource 2 [mem 0x80000400000-0x800005fffff 64bit pref]
[    0.120166] pci_bus 0000:08: resource 0 [io  0x15000-0x15fff]
[    0.120170] pci_bus 0000:08: resource 1 [mem 0x80200000-0x803fffff]
[    0.120174] pci_bus 0000:08: resource 2 [mem 0x80000600000-0x800007fffff 64bit pref]
[    0.120178] pci_bus 0000:09: resource 0 [io  0x16000-0x16fff]
[    0.120181] pci_bus 0000:09: resource 1 [mem 0x80400000-0x805fffff]
[    0.120185] pci_bus 0000:09: resource 2 [mem 0x80000800000-0x800009fffff 64bit pref]
[    0.120188] PCI: Probing PCI hardware done
[    0.144075] HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages
[    0.160826] raid6: altivecx1 gen()  2511 MB/s
[    0.177886] raid6: altivecx2 gen()  3085 MB/s
[    0.194970] raid6: altivecx4 gen()  3582 MB/s
[    0.212029] raid6: altivecx8 gen()  3601 MB/s
[    0.229120] raid6: int64x1  gen()  1019 MB/s
[    0.246146] raid6: int64x1  xor()   490 MB/s
[    0.263241] raid6: int64x2  gen()  1664 MB/s
[    0.280281] raid6: int64x2  xor()   902 MB/s
[    0.297337] raid6: int64x4  gen()  1941 MB/s
[    0.314411] raid6: int64x4  xor()  1166 MB/s
[    0.331494] raid6: int64x8  gen()  1394 MB/s
[    0.348523] raid6: int64x8  xor()  1072 MB/s
[    0.348529] raid6: using algorithm altivecx8 gen() 3601 MB/s
[    0.348535] raid6: using intx1 recovery algorithm
[    0.348960] SCSI subsystem initialized
[    0.349194] libata version 3.00 loaded.
[    0.349563] usbcore: registered new interface driver usbfs
[    0.349639] usbcore: registered new interface driver hub
[    0.349685] usbcore: registered new device driver usb
[    0.350075] EDAC MC: Ver: 3.0.0
[    0.350708] Advanced Linux Sound Architecture Driver Initialized.
[    0.351285] clocksource: Switched to clocksource timebase
[    0.387539] NET: Registered protocol family 2
[    0.387839] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.387876] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.388025] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.388250] TCP: Hash tables configured (established 32768 bind 32768)
[    0.388344] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.388398] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.388524] NET: Registered protocol family 1
[    0.388735] RPC: Registered named UNIX socket transport module.
[    0.388744] RPC: Registered udp transport module.
[    0.388749] RPC: Registered tcp transport module.
[    0.388755] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.389123] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.440315] pci 0000:05:13.0: .quirk_usb_early_handoff+0x0/0x9d0 took 49962 usecs
[    0.492301] pci 0000:05:13.1: .quirk_usb_early_handoff+0x0/0x9d0 took 50745 usecs
[    0.544304] pci 0000:05:13.2: .quirk_usb_early_handoff+0x0/0x9d0 took 50765 usecs
[    0.596299] pci 0000:05:13.3: .quirk_usb_early_handoff+0x0/0x9d0 took 50756 usecs
[    0.648301] pci 0000:05:13.4: .quirk_usb_early_handoff+0x0/0x9d0 took 50763 usecs
[    0.648859] PCI: CLS 64 bytes, default 128
[    0.650016] libphy: pasemi gpio mdio bus: probed
[    0.650374] mdio_bus 0: MDIO device at address 0 is missing.
[    0.650844] Initialise system trusted keyrings
[    0.651089] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[    0.651572] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.651870] ntfs: driver 2.1.32 [Flags: R/W].
[    0.651978] fuse init (API version 7.27)
[    0.654788] Key type asymmetric registered
[    0.654797] Asymmetric key parser 'x509' registered
[    0.654829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.654838] io scheduler noop registered
[    0.654844] io scheduler deadline registered
[    0.654870] io scheduler cfq registered (default)
[    0.654877] io scheduler mq-deadline registered
[    0.654882] io scheduler kyber registered
[    0.654910] io scheduler bfq registered
[    0.655123] pcieport 0000:00:10.0: runtime IRQ mapping not provided by arch
[    0.655356] pcieport 0000:00:10.1: runtime IRQ mapping not provided by arch
[    0.655500] pcieport 0000:00:10.2: runtime IRQ mapping not provided by arch
[    0.655643] pcieport 0000:00:10.3: runtime IRQ mapping not provided by arch
[    0.655779] pcieport 0000:00:11.0: runtime IRQ mapping not provided by arch
[    0.655977] pcieport 0000:00:11.1: runtime IRQ mapping not provided by arch
[    0.656177] pcieport 0000:00:11.2: runtime IRQ mapping not provided by arch
[    0.656397] pcieport 0000:00:11.3: runtime IRQ mapping not provided by arch
[    0.656613] pcieport 0000:05:14.4: runtime IRQ mapping not provided by arch
[    0.657201] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.677608] serial8250.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud = 8333333) is a 16550A
[    0.697767] serial8250.0: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud = 8333333) is a 16550A
[    0.698078] serial 0000:00:1d.0: runtime IRQ mapping not provided by arch
[    0.718077] 0000:00:1d.0: ttyS0 at I/O 0x8003f8 (irq = 73, base_baud = 8333333) is a 16550A
[    0.718258] serial 0000:00:1d.1: runtime IRQ mapping not provided by arch
[    0.738269] 0000:00:1d.1: ttyS1 at I/O 0x8002f8 (irq = 74, base_baud = 8333333) is a 16550A
[    0.738837] Registering PA Semi RNG
[    0.738935] Linux agpgart interface v0.103
[    0.739082] [drm] radeon kernel modesetting enabled.
[    0.739202] radeon 0000:01:00.0: runtime IRQ mapping not provided by arch
[    0.739532] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x174B:0xE208 0x00).
[    0.910274] ATOM BIOS: Tahiti
[    0.910360] [drm] Changing default dispclk from 500Mhz to 600Mhz
[    0.910385] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
[    0.910397] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
[    0.910404] [drm] Detected VRAM RAM=3072M, BAR=256M
[    0.910410] [drm] RAM width 384bits DDR
[    0.910502] [TTM] Zone  kernel: Available graphics memory: 2003690 kiB
[    0.910512] [TTM] Initializing pool allocator
[    0.910553] [drm] radeon: 3072M of VRAM memory ready
[    0.910560] [drm] radeon: 2048M of GTT memory ready.
[    0.910584] [drm] Loading tahiti Microcode
[    0.910635] [drm] Internal thermal controller with fan control
[    0.923208] [drm] radeon: dpm initialized
[    0.924331] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    0.924356] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    0.929668] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[    2.230606] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[    2.230793] radeon 0000:01:00.0: WB enabled
[    2.230804] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0x(____ptrval____)
[    2.230816] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0x(____ptrval____)
[    2.230829] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0x(____ptrval____)
[    2.230841] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0x(____ptrval____)
[    2.230853] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0x(____ptrval____)
[    2.237582] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x(____ptrval____)
[    2.260512] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0x(____ptrval____)
[    2.260528] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0x(____ptrval____)
[    2.260539] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.260546] [drm] Driver supports precise vblank timestamp query.
[    2.260553] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    2.260594] [drm] radeon: irq initialized.
[    2.365060] [drm] ring test on 0 succeeded in 1 usecs
[    2.365073] [drm] ring test on 1 succeeded in 1 usecs
[    2.365082] [drm] ring test on 2 succeeded in 1 usecs
[    2.365095] [drm] ring test on 3 succeeded in 3 usecs
[    2.365108] [drm] ring test on 4 succeeded in 3 usecs
[    2.550489] [drm] ring test on 5 succeeded in 2 usecs
[    2.550499] [drm] UVD initialized successfully.
[    2.659481] [drm] ring test on 6 succeeded in 32 usecs
[    2.659499] [drm] ring test on 7 succeeded in 5 usecs
[    2.659504] [drm] VCE initialized successfully.
[    2.659882] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.659925] [drm] ib test on ring 1 succeeded in 0 usecs
[    2.659975] [drm] ib test on ring 2 succeeded in 0 usecs
[    2.660016] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.660054] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.829705] [drm] ib test on ring 5 succeeded
[    3.330315] [drm] ib test on ring 6 succeeded
[    3.834311] [drm] ib test on ring 7 succeeded
[    3.835744] [drm] Radeon Display Connectors
[    3.835753] [drm] Connector 0:
[    3.835757] [drm]   DP-1
[    3.835761] [drm]   HPD5
[    3.835767] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    3.835773] [drm]   Encoders:
[    3.835777] [drm]     DFP1: INTERNAL_UNIPHY2
[    3.835782] [drm] Connector 1:
[    3.835786] [drm]   DP-2
[    3.835790] [drm]   HPD4
[    3.835796] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    3.835801] [drm]   Encoders:
[    3.835805] [drm]     DFP2: INTERNAL_UNIPHY2
[    3.835810] [drm] Connector 2:
[    3.835814] [drm]   HDMI-A-1
[    3.835818] [drm]   HPD1
[    3.835823] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    3.835829] [drm]   Encoders:
[    3.835833] [drm]     DFP3: INTERNAL_UNIPHY1
[    3.835838] [drm] Connector 3:
[    3.835841] [drm]   DVI-I-1
[    3.835845] [drm]   HPD3
[    3.835851] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[    3.835857] [drm]   Encoders:
[    3.835861] [drm]     DFP4: INTERNAL_UNIPHY
[    3.835865] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.048586] [drm] fb mappable at 0x905D8000
[    4.048596] [drm] vram apper at 0x90000000
[    4.048601] [drm] size 8294400
[    4.048606] [drm] fb depth is 24
[    4.048610] [drm]    pitch is 7680
[    4.149613] [drm:.si_dpm_set_power_state] *ERROR* si_restrict_performance_levels_before_switch failed
[    4.369450] Console: switching to colour frame buffer device 240x67
[    4.472816] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    4.473347] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    4.477393] loop: module loaded
[    4.477809] ahci 0000:05:12.0: runtime IRQ mapping not provided by arch
[    4.477815] ahci 0000:05:12.0: version 3.0
[    4.477858] ahci 0000:05:12.0: controller can't do 64bit DMA, forcing 32bit
[    4.478430] ahci 0000:05:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    4.479001] ahci 0000:05:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
[    4.480814] scsi host0: ahci
[    4.481169] scsi host1: ahci
[    4.481535] scsi host2: ahci
[    4.481880] scsi host3: ahci
[    4.482096] ata1: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209500 irq 9
[    4.482612] ata2: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209580 irq 9
[    4.483116] ata3: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209600 irq 9
[    4.483622] ata4: SATA max UDMA/133 abar m1024@0xa0209400 port 0xa0209680 irq 9
[    4.484328] pata_atiixp 0000:05:14.1: runtime IRQ mapping not provided by arch
[    4.484988] scsi host4: pata_atiixp
[    4.485385] scsi host5: pata_atiixp
[    4.485642] ata5: PATA max UDMA/100 cmd 0x11030 ctl 0x11054 bmdma 0x11000 irq 9
[    4.486146] ata6: DUMMY
[    4.486751] libphy: Fixed MDIO Bus: probed
[    4.487430] random: fast init done
[    4.487861] PA Semi PWRficient DMA library initialized (20 tx, 64 rx channels)
[    4.488424] pasemi_mac 0000:00:14.0: runtime IRQ mapping not provided by arch
[    4.488493] pasemi_mac 0000:00:14.1: runtime IRQ mapping not provided by arch
[    4.488540] pasemi_mac 0000:00:14.2: runtime IRQ mapping not provided by arch
[    4.488584] pasemi_mac 0000:00:14.3: runtime IRQ mapping not provided by arch
[    4.488823] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[    4.489257] pasemi_mac 0000:00:15.0: runtime IRQ mapping not provided by arch
[    4.489291] pasemi_mac 0000:00:15.0: no mac address in device tree, not configuring
[    4.489854] pasemi_mac 0000:00:15.1: runtime IRQ mapping not provided by arch
[    4.489952] 8139cp 0000:06:06.0: runtime IRQ mapping not provided by arch
[    4.489956] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    4.490440] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    4.491193] 8139too 0000:06:06.0: runtime IRQ mapping not provided by arch
[    4.491195] 8139too: 8139too Fast Ethernet driver 0.9.28
[    4.492500] 8139too 0000:06:06.0 eth1: RealTek RTL8139 at 0x(____ptrval____), f8:1a:67:02:3c:52, IRQ 5
[    4.493260] PPP generic driver version 2.4.2
[    4.493713] PPP BSD Compression module registered
[    4.493996] PPP Deflate Compression module registered
[    4.494319] NET: Registered protocol family 24
[    4.494594] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[    4.494597] orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
[    4.494642] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[    4.494977] electra-cf f0000000.cf: at mem 0xf0000000 io 0xf1000000 irq 17
[    4.495583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.496049] ehci-pci: EHCI PCI platform driver
[    4.496361] ehci-pci 0000:05:13.5: runtime IRQ mapping not provided by arch
[    4.496391] ehci-pci 0000:05:13.5: enabling bus mastering
[    4.496427] ehci-pci 0000:05:13.5: EHCI Host Controller
[    4.496828] ehci-pci 0000:05:13.5: new USB bus registered, assigned bus number 1
[    4.514398] ehci-pci 0000:05:13.5: applying AMD SB600/SB700 USB freeze workaround
[    4.532173] ehci-pci 0000:05:13.5: debug port 1
[    4.549925] ehci-pci 0000:05:13.5: irq 12, io mem 0xa0209800
[    4.574291] ehci-pci 0000:05:13.5: USB 2.0 started, EHCI 1.00
[    4.591825] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    4.609873] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.628019] usb usb1: Product: EHCI Host Controller
[    4.646206] usb usb1: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ehci_hcd
[    4.665028] usb usb1: SerialNumber: 0000:05:13.5
[    4.683798] hub 1-0:1.0: USB hub found
[    4.702209] hub 1-0:1.0: 10 ports detected
[    4.720957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.739772] ohci-pci: OHCI PCI platform driver
[    4.758659] ohci-pci 0000:05:13.0: runtime IRQ mapping not provided by arch
[    4.758677] ohci-pci 0000:05:13.0: enabling bus mastering
[    4.758682] ohci-pci 0000:05:13.0: OHCI PCI host controller
[    4.777927] ohci-pci 0000:05:13.0: new USB bus registered, assigned bus number 2
[    4.791566] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.803323] ohci-pci 0000:05:13.0: irq 9, io mem 0xa0208000
[    4.813334] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.848240] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.867725] ata3.00: ATAPI: TSSTcorp CDDVDW SH-224BB, SB00, max UDMA/100
[    4.884844] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    4.889369] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    4.902167] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.921087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.959875] ata1.00: ATA-10: TS256GSSD230S, R0427BNR, max UDMA/133
[    4.959879] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    4.978864] usb usb2: Product: OHCI PCI host controller
[    4.978868] usb usb2: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[    4.997243] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.015971] usb usb2: SerialNumber: 0000:05:13.0
[    5.033673] ata3.00: configured for UDMA/100
[    5.033717] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.052908] hub 2-0:1.0: USB hub found
[    5.070784] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.089115] hub 2-0:1.0: 2 ports detected
[    5.106558] ata1.00: configured for UDMA/133
[    5.106758] scsi 0:0:0:0: Direct-Access     ATA      TS256GSSD230S    7BNR PQ: 0 ANSI: 5
[    5.125385] ata4.00: ATA-8: ST1000DM003-1CH162, CC44, max UDMA/133
[    5.143903] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    5.162775] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.162784] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.181556] sd 0:0:0:0: [sda] Write Protect is off
[    5.201528] ohci-pci 0000:05:13.1: runtime IRQ mapping not provided by arch
[    5.219916] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.240447] ohci-pci 0000:05:13.1: enabling bus mastering
[    5.259798] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.280492] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.299950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.320397] ohci-pci 0000:05:13.1: OHCI PCI host controller
[    5.340650] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.361372] ohci-pci 0000:05:13.1: new USB bus registered, assigned bus number 3
[    5.381147] ata4.00: configured for UDMA/133
[    5.382412]  sda: RDSK (512) sda1 (DOS^A)(res 2 spb 2) sda2 (SFS^B)(res 2 spb 2) sda3 (SFS^B)(res 2 spb 2) sda4 (SFS^B)(res 2 spb 2) sda5 (SFS^B)(res 2 spb 2)
[    5.402544] ohci-pci 0000:05:13.1: irq 10, io mem 0xa0207000
[    5.442292] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[    5.469171] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.488079] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 17)
[    5.514378] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    5.529527] ata2.00: ATA-9: ST1000DM003-1ER162, CC45, max UDMA/133
[    5.551088] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.572214] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.594297] usb usb3: Product: OHCI PCI host controller
[    5.655011] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.663027] usb usb3: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[    5.663031] usb usb3: SerialNumber: 0000:05:13.1
[    5.663426] hub 3-0:1.0: USB hub found
[    5.757202] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.757338] hub 3-0:1.0: 2 ports detected
[    5.778547] ata2.00: configured for UDMA/133
[    5.778702] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC45 PQ: 0 ANSI: 5
[    5.801445] ohci-pci 0000:05:13.2: runtime IRQ mapping not provided by arch
[    5.822753] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.845074] ohci-pci 0000:05:13.2: enabling bus mastering
[    5.866288] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    5.866301] ohci-pci 0000:05:13.2: OHCI PCI host controller
[    5.887618] sd 1:0:0:0: [sdb] Write Protect is off
[    5.909972] ohci-pci 0000:05:13.2: new USB bus registered, assigned bus number 4
[    5.930868] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.930932] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.954058] ohci-pci 0000:05:13.2: irq 11, io mem 0xa0206000
[    5.975556] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.999047] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63
[    6.046011] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.071484] usb 1-1: Product: USB2.0 Hub
[    6.071524]  sdb: RDSK (512) sdb1 (SWP^@)(res 2 spb 2) sdb2 ((res 2 spb 2) sdb3 ((res 2 spb 2) sdb4 ((res 2 spb 2) sdb5 (EXT^B)(res 2 spb 2) sdb6 ((res 2 spb 2)
[    6.098888] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    6.118849] sd 1:0:0:0: [sdb] Attached SCSI disk
[    6.142634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.165869] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224BB  SB00 PQ: 0 ANSI: 5
[    6.190549] usb usb4: Product: OHCI PCI host controller
[    6.190553] usb usb4: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[    6.190556] usb usb4: SerialNumber: 0000:05:13.2
[    6.216511] hub 4-0:1.0: USB hub found
[    6.318882] hub 4-0:1.0: 2 ports detected
[    6.318924] hub 1-1:1.0: USB hub found
[    6.341764] ohci-pci 0000:05:13.3: runtime IRQ mapping not provided by arch
[    6.365254] ohci-pci 0000:05:13.3: enabling bus mastering
[    6.365260] ohci-pci 0000:05:13.3: OHCI PCI host controller
[    6.389226] ohci-pci 0000:05:13.3: new USB bus registered, assigned bus number 5
[    6.411614] hub 1-1:1.0: 4 ports detected
[    6.411987] ohci-pci 0000:05:13.3: irq 10, io mem 0xa0204000
[    6.461387] sr 2:0:0:0: [sr0] scsi3-mmc drive: 47x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.486110] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.512136] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    6.512388] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    6.515043] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    6.561980] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.562519] scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC44 PQ: 0 ANSI: 5
[    6.585065] usb usb5: Product: OHCI PCI host controller
[    6.585068] usb usb5: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[    6.585071] usb usb5: SerialNumber: 0000:05:13.3
[    6.613442] hub 5-0:1.0: USB hub found
[    6.637006] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    6.659668] hub 5-0:1.0: 2 ports detected
[    6.683951] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[    6.706938] ohci-pci 0000:05:13.4: runtime IRQ mapping not provided by arch
[    6.731957] sd 3:0:0:0: [sdc] Write Protect is off
[    6.754734] ohci-pci 0000:05:13.4: enabling bus mastering
[    6.779028] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    6.801538] ohci-pci 0000:05:13.4: OHCI PCI host controller
[    6.801570] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    6.824315] ohci-pci 0000:05:13.4: new USB bus registered, assigned bus number 6
[    6.848466] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.871023] ohci-pci 0000:05:13.4: irq 11, io mem 0xa0205000
[    6.939011]  sdc: RDSK (512) sdc1 (DOS^G)(res 2 spb 2) sdc2 (SFS^B)(res 2 spb 1) sdc3 (SFS^B)(res 2 spb 1) sdc4 (SFS^B)(res 2 spb 2) sdc5 (EXT^B)(res 2 spb 2) sdc6 (EXT^B)(res 2 spb 2)
[    6.966964] sd 3:0:0:0: [sdc] Attached SCSI disk
[    6.974370] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    7.017201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.042483] usb usb6: Product: OHCI PCI host controller
[    7.067437] usb usb6: Manufacturer: Linux 4.19.3_A-EON_AmigaOne_X1000_Nemo ohci_hcd
[    7.068298] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    7.090450] usb usb6: SerialNumber: 0000:05:13.4
[    7.139645] hub 6-0:1.0: USB hub found
[    7.163678] hub 6-0:1.0: 2 ports detected
[    7.187370] usbcore: registered new interface driver usblp
[    7.211754] usbcore: registered new interface driver usb-storage
[    7.235916] usbcore: registered new interface driver usbserial_generic
[    7.259939] usbserial: USB Serial support registered for generic
[    7.284024] usbcore: registered new interface driver ftdi_sio
[    7.308207] usbserial: USB Serial support registered for FTDI USB Serial Device
[    7.332603] usbcore: registered new interface driver option
[    7.356672] usbserial: USB Serial support registered for GSM modem (1-port)
[    7.381252] mousedev: PS/2 mouse device common for all mice
[    7.405510] usbcore: registered new interface driver synaptics_usb
[    7.430076] usbcore: registered new interface driver iforce
[    7.454397] usbcore: registered new interface driver xpad
[    7.477996] usbcore: registered new interface driver usb_acecad
[    7.501322] usbcore: registered new interface driver aiptek
[    7.524234] usbcore: registered new interface driver gtco
[    7.524311] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[    7.544670] usbcore: registered new interface driver hanwang
[    7.544696] usbcore: registered new interface driver kbtab
[    7.588886] usb 3-2: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[    7.588891] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.588894] usb 3-2: Product: USB-PS/2 Optical Mouse
[    7.588897] usb 3-2: Manufacturer: Logitech
[    7.695082] rtc_cmos rtc_cmos: registered as rtc0
[    7.715669] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    7.736177] i2c /dev entries driver
[    7.757178] i2c-pasemi 0000:00:1c.0: runtime IRQ mapping not provided by arch
[    7.757318] i2c-pasemi 0000:00:1c.1: runtime IRQ mapping not provided by arch
[    7.757458] i2c-pasemi 0000:00:1c.2: runtime IRQ mapping not provided by arch
[    7.757624] IR NEC protocol handler initialized
[    7.777920] IR RC5(x/sz) protocol handler initialized
[    7.798405] IR RC6 protocol handler initialized
[    7.819020] IR JVC protocol handler initialized
[    7.839302] IR Sony protocol handler initialized
[    7.859573] IR SANYO protocol handler initialized
[    7.879652] IR Sharp protocol handler initialized
[    7.899488] IR MCE Keyboard/mouse protocol handler initialized
[    7.919246] IR XMP protocol handler initialized
[    7.919262] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[    7.954296] i2c i2c-10: Detected TI TMP423 chip at 0x4c
[    7.957577] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.996494] usb 1-1.1: Product: Ultra USB 3.0
[    8.017109] usb 1-1.1: Manufacturer: SanDisk
[    8.037443] usb 1-1.1: SerialNumber: 4C530001230914112545
[    8.039349] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    8.075837] pasemi_edac 0000:00:04.0: runtime IRQ mapping not provided by arch
[    8.076172] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    8.076333] EDAC MC0: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:04.0 (POLLED)
[    8.095602] scsi host6: usb-storage 1-1.1:1.0
[    8.114076] pasemi_edac 0000:00:05.0: runtime IRQ mapping not provided by arch
[    8.133792] EDAC MC1: Giving out device to module pasemi_edac controller pasemi,pwrficient-mc: DEV 0000:00:05.0 (POLLED)
[    8.161167] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:11.0/0000:05:13.1/usb3/3-2/3-2:1.0/0003:046D:C050.0001/input/input0
[    8.183269] hid-generic 0003:046D:C050.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:05:13.1-2/input0
[    8.205834] usbcore: registered new interface driver usbhid
[    8.228184] usbhid: USB HID core driver
[    8.250538] no UART detected at 0x1
[    8.272314] usb 1-1.3: new low-speed USB device number 5 using ehci-pci
[    8.273111] snd_hda_intel 0000:01:00.1: runtime IRQ mapping not provided by arch
[    8.293761] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
[    8.315146] snd_hda_intel 0000:05:14.2: runtime IRQ mapping not provided by arch
[    8.315170] snd_hda_intel 0000:05:14.2: Force to snoop mode by module option
[    8.335781] usbcore: registered new interface driver snd-usb-audio
[    8.356592] usbcore: registered new interface driver snd-ua101
[    8.376119] usbcore: registered new interface driver snd-usb-usx2y
[    8.395347] usbcore: registered new interface driver snd-usb-caiaq
[    8.414208] usbcore: registered new interface driver snd-usb-6fire
[    8.432647] usbcore: registered new interface driver snd-usb-hiface
[    8.450825] usbcore: registered new interface driver snd-bcd2000
[    8.468883] usbcore: registered new interface driver snd_usb_pod
[    8.486852] usbcore: registered new interface driver snd_usb_podhd
[    8.504646] usbcore: registered new interface driver snd_usb_toneport
[    8.522469] usbcore: registered new interface driver snd_usb_variax
[    8.540026] oprofile: using ppc64/pa6t performance monitoring.
[    8.540240] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    8.540768] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input1
[    8.558388] Initializing XFRM netlink socket
[    8.593051] NET: Registered protocol family 10
[    8.609411] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input2
[    8.610996] usb 1-1.3: New USB device found, idVendor=1c4f, idProduct=0026, bcdDevice= 1.10
[    8.647039] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.647402] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input3
[    8.665684] usb 1-1.3: Product: USB Keyboard
[    8.703312] usb 1-1.3: Manufacturer: SIGMACHIP
[    8.720472] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input4
[    8.744572] Segment Routing with IPv6
[    8.767054] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:11.0/0000:05:13.5/usb1/1-1/1-1.3/1-1.3:1.0/0003:1C4F:0026.0002/input/input7
[    8.782326] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    8.812847] NET: Registered protocol family 17
[    8.835042] NET: Registered protocol family 15
[    8.856771] drmem: No dynamic reconfiguration memory found
[    8.878457] No cpufreq driver, powersavings modes disabled
[    8.900090] Using PA6T idle loop (spin)
[    8.921967] hid-generic 0003:1C4F:0026.0002: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:05:13.5-1.3/input0
[    8.944797] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input5
[    8.945213] Loading compiled-in X.509 certificates
[    8.966815] snd_hda_codec_idt hdaudioC1D3: autoconfig for STAC92HD700: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[    8.990021] Btrfs loaded, crc32c=crc32c-generic
[    9.011965] snd_hda_codec_idt hdaudioC1D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.058516] rtc_cmos rtc_cmos: setting system clock to 2019-04-09 18:29:20 UTC (1554834560)
[    9.058520] snd_hda_codec_idt hdaudioC1D3:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[    9.058523] snd_hda_codec_idt hdaudioC1D3:    mono: mono_out=0x0
[    9.084403] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:11.0/0000:05:13.5/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0026.0003/input/input8
[    9.106753] snd_hda_codec_idt hdaudioC1D3:    dig-out=0x21/0x0
[    9.131735] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.156487] snd_hda_codec_idt hdaudioC1D3:    inputs:
[    9.184036] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.208277] snd_hda_codec_idt hdaudioC1D3:      Front Mic=0xb
[    9.208284] snd_hda_codec_idt hdaudioC1D3:      Rear Mic=0xe
[    9.208288] snd_hda_codec_idt hdaudioC1D3:      Line=0xc
[    9.208291] snd_hda_codec_idt hdaudioC1D3:      CD=0x12
[    9.235083] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:11.0/0000:05:13.5/usb1/1-1/1-1.3/1-1.3:1.1/0003:1C4F:0026.0003/input/input9
[    9.265874] ALSA device list:
[    9.288170] scsi 6:0:0:0: Direct-Access     SanDisk  Ultra USB 3.0    1.00 PQ: 0 ANSI: 6
[    9.311991]   No soundcards found.
[    9.312123] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:10.0/0000:01:00.1/sound/card0/input6
[    9.338337] hid-generic 0003:1C4F:0026.0003: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:05:13.5-1.3/input1
[    9.362956] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    9.390564] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    9.414971] cfg80211: failed to load regulatory.db
[    9.531317] sd 6:0:0:0: [sdd] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
[    9.638071] sd 6:0:0:0: [sdd] Write Protect is off
[    9.664630] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
[    9.665696] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    9.700452]  sdd: sdd1
[    9.730456] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[   10.086439] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input10
[   10.114472] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input11
[   10.142807] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input12
[   10.171423] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input13
[   10.200497] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input14
[   10.229980] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input15
[   10.244777] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[   10.258199] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input16
[   10.287863] VFS: Mounted root (ext4 filesystem) readonly on device 8:22.
[   10.316446] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:11.0/0000:05:14.2/sound/card1/input17
[   10.400907] devtmpfs: mounted
[   10.436407] Freeing unused kernel memory: 1004K
[   10.469809] This architecture does not have kernel memory protection.
[   10.503083] Run /sbin/init as init process
[   10.825276] random: crng init done
I also try resize ext2 filesysytem to 3.9G - no change, not visible in fienix/5.1
and then format to fat16, 3.9G * also not visible in fienix/5.1. But this time during boot to AmigaOS I recieve the message - "distorted filesystem". I comment the cfide.device.kmod now.

Next I try again prepare the cfcard from linux side, maybe its corrupted.
Last edited by sailorMH on Wed Apr 10, 2019 7:11 am, edited 1 time in total.
Micro A1-C (G3/1.2 GHz), AmigaOne XE (G4/1.4 GHz), Pegasos II (G4/1.33 GHz), Sam440ep, Sam440ep-flex, AmigaOne X1000
Efika 5200b, Pegasos I, Powerbook, Mac Mini (1.83 GHz), iMac, Powermac Quad

AmigaOS, MorphOS, linux, MacOS X
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Fienix - New PowerPC Distro

Post by xeno74 »

musa wrote: Its start with some lag and 2 to 3 min. after it break down.
Hi Musa,

Could you please post the output of glxinfo | grep -i opengl?

Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Fienix - New PowerPC Distro

Post by xeno74 »

sailorMH wrote: Hi Christian,

here is dmesg - i don't finy anything regarding cfcard

I also try resize ext2 filesysytem to 3.9G - no change, not visible in fienix/5.1
and then format to fat16, 3.9G * also not visible in fienix/5.1. But this time during boot to AmigaOS I recieve the message - "distorted filesystem". I comment the cfide.device.kmod now.

Next I try again prepare the cfcard from linux side, maybe its corrupted.
Please try a msdos partition table. You can create it with GParted.

Instructions:

Open gparted

Use the menu on the right side of the toolbar to select the CF card

Click the Device menu, then click Create Partition Table

Select new partition table type: msdos

Click Apply

Choose the Partition menu, then New

Enter the following options: Free space preceding: 1; New size: 128; File system: fat16; Label: NEMOBOOT

Click Add button

In the toolbar, click the check mark for “Apply All Operations”

Click the Apply button

After all operations have completed, click the Close button

— Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
sailorMH
Posts: 230
Joined: Wed Aug 28, 2013 6:01 pm
Location: Czech republic

Re: Fienix - New PowerPC Distro

Post by sailorMH »

there is second part od dmesg (11 sec and above). First part is in the post above. Sorry it exceeds max message length.

Code: Select all

[   11.718567] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   11.753692] systemd[1]: Detected architecture ppc64.
[   11.914955] systemd[1]: Set hostname to <Fienix>.
[   12.667162] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   12.701668] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   13.295597] systemd[1]: Listening on udev Kernel Socket.
[   13.364308] systemd[1]: Listening on Syslog Socket.
[   13.432233] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   13.500857] systemd[1]: Listening on Journal Socket.
[   13.567804] systemd[1]: Reached target Swap.
[   16.802840] sr 2:0:0:0: [sr0] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   16.826241] sr 2:0:0:0: [sr0] tag#0 Sense Key : 0x5 [current] 
[   16.848506] sr 2:0:0:0: [sr0] tag#0 ASC=0x6f ASCQ=0x3 
[   16.869591] sr 2:0:0:0: [sr0] tag#0 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[   16.890834] print_req_error: I/O error, dev sr0, sector 2048
[   16.967848] sr 2:0:0:0: [sr0] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   16.989871] sr 2:0:0:0: [sr0] tag#1 Sense Key : 0x5 [current] 
[   17.011805] sr 2:0:0:0: [sr0] tag#1 ASC=0x6f ASCQ=0x3 
[   17.032805] sr 2:0:0:0: [sr0] tag#1 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[   17.053244] print_req_error: I/O error, dev sr0, sector 2048
[   17.073243] Buffer I/O error on dev sr0, logical block 256, async page read
[   17.688839] sr 2:0:0:0: [sr0] tag#15 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   17.709420] sr 2:0:0:0: [sr0] tag#15 Sense Key : 0x5 [current] 
[   17.729847] sr 2:0:0:0: [sr0] tag#15 ASC=0x6f ASCQ=0x3 
[   17.749980] sr 2:0:0:0: [sr0] tag#15 CDB: opcode=0x28 28 00 00 37 f3 be 00 00 3e 00
[   17.770193] print_req_error: I/O error, dev sr0, sector 14667512
[   17.912746] sr 2:0:0:0: [sr0] tag#14 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   17.933317] sr 2:0:0:0: [sr0] tag#14 Sense Key : 0x5 [current] 
[   17.953808] sr 2:0:0:0: [sr0] tag#14 ASC=0x6f ASCQ=0x3 
[   17.974129] sr 2:0:0:0: [sr0] tag#14 CDB: opcode=0x28 28 00 00 37 f3 fa 00 00 02 00
[   17.994657] print_req_error: I/O error, dev sr0, sector 14667752
[   18.015137] Buffer I/O error on dev sr0, logical block 1833469, async page read
[   18.661797] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[   18.938359] systemd-journald[1638]: Received request to flush runtime journal from PID 1
[   21.257898] sr 2:0:0:0: [sr0] tag#25 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   21.257906] sr 2:0:0:0: [sr0] tag#25 Sense Key : 0x5 [current] 
[   21.257911] sr 2:0:0:0: [sr0] tag#25 ASC=0x6f ASCQ=0x3 
[   21.257917] sr 2:0:0:0: [sr0] tag#25 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[   21.257921] print_req_error: I/O error, dev sr0, sector 2048
[   21.380837] sr 2:0:0:0: [sr0] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   21.380844] sr 2:0:0:0: [sr0] tag#26 Sense Key : 0x5 [current] 
[   21.380849] sr 2:0:0:0: [sr0] tag#26 ASC=0x6f ASCQ=0x3 
[   21.380855] sr 2:0:0:0: [sr0] tag#26 CDB: opcode=0x28 28 00 00 00 02 00 00 00 02 00
[   21.380859] print_req_error: I/O error, dev sr0, sector 2048
[   21.380863] Buffer I/O error on dev sr0, logical block 256, async page read
[   21.648810] 8139too 0000:06:06.0 enp6s6: renamed from eth1
[   21.682078] pasemi_mac 0000:00:14.3 enp0s20f3: renamed from eth0
[   21.954855] sr 2:0:0:0: [sr0] tag#8 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   21.971766] sr 2:0:0:0: [sr0] tag#8 Sense Key : 0x5 [current] 
[   21.988145] sr 2:0:0:0: [sr0] tag#8 ASC=0x6f ASCQ=0x3 
[   22.004825] sr 2:0:0:0: [sr0] tag#8 CDB: opcode=0x28 28 00 00 37 f3 be 00 00 3e 00
[   22.021359] print_req_error: I/O error, dev sr0, sector 14667512
[   22.173333] sr 2:0:0:0: [sr0] tag#7 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[   22.190508] sr 2:0:0:0: [sr0] tag#7 Sense Key : 0x5 [current] 
[   22.207400] sr 2:0:0:0: [sr0] tag#7 ASC=0x6f ASCQ=0x3 
[   22.224126] sr 2:0:0:0: [sr0] tag#7 CDB: opcode=0x28 28 00 00 37 f3 fa 00 00 02 00
[   22.240838] print_req_error: I/O error, dev sr0, sector 14667752
[   22.257595] Buffer I/O error on dev sr0, logical block 1833469, async page read
[   28.006847] IPv6: ADDRCONF(NETDEV_UP): enp0s20f3: link is not ready
[   28.030690] enp0s20f3: Could not attach to phy
[   28.051059] pasemi_mac 0000:00:14.3: PHY init failed: -19.
[   28.071480] pasemi_mac 0000:00:14.3: Defaulting to 1Gbit full duplex
[   28.168434] IPv6: ADDRCONF(NETDEV_UP): enp6s6: link is not ready
[   28.168644] 8139too 0000:06:06.0 enp6s6: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   35.290315] radeon_dp_aux_transfer_native: 158 callbacks suppressed
[  188.495442] radeon_dp_aux_transfer_native: 158 callbacks suppressed
[  199.162637] EXT2-fs (sdd1): warning: mounting unchecked fs, running e2fsck is recommended
[  200.513862] UDF-fs: INFO Mounting volume 'HOBBIT_AN_UNEXPECTED_JOURNEY', timestamp 2013/01/22 21:32 (1000)
@xeno74
Hi Christian
Original preparation of cfcard for the first time I made with gparted (only I don't touch preceeding space and leave it default).
Every other change ( resize, format to fat16 ) was done with gparted. Only other operation was fsck.ext2. I don't touch the card from AmigaOS.

Now I will do it again, with gparted, very small fat16 partition. And if it will not works, I'll prepare it in PC, and let you know.
Micro A1-C (G3/1.2 GHz), AmigaOne XE (G4/1.4 GHz), Pegasos II (G4/1.33 GHz), Sam440ep, Sam440ep-flex, AmigaOne X1000
Efika 5200b, Pegasos I, Powerbook, Mac Mini (1.83 GHz), iMac, Powermac Quad

AmigaOS, MorphOS, linux, MacOS X
User avatar
musa
Posts: 710
Joined: Tue Aug 23, 2011 7:58 pm

Re: Fienix - New PowerPC Distro

Post by musa »

xeno74 wrote:
musa wrote: Its start with some lag and 2 to 3 min. after it break down.
Hi Musa,

Could you please post the output of glxinfo | grep -i opengl?

Thanks,
Christian
Hi Christian
Here is the output
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: llvmpipe (LLVM 7.0, 128 bits)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 18.3.4
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.1 Mesa 18.3.4
OpenGL shading language version string: 1.40
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 18.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00
OpenGL ES profile extensions:
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Fienix - New PowerPC Distro

Post by xeno74 »

Musa,

Unfortunately, the hardware 3D acceleration doesn’t work with your current configuration.

You need a xorg.conf for your Radeon HD6870.

Please run the "lspci" command to get the BusID of your Radeon HD6870.

After that create a /etc/X11/xorg.conf with the following content:

Code: Select all

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Device"
Identifier "Device0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth	24
Modes "1920x1080_75.00"
EndSubSection
EndSection
Then modify the entry BusID with the value you got with the lspci command for example BusID "PCI:1:0:0". Maybe you have to change the display mode.

Good luck!

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
musa
Posts: 710
Joined: Tue Aug 23, 2011 7:58 pm

Re: Fienix - New PowerPC Distro

Post by musa »

xeno74 wrote:Musa,

Unfortunately, the hardware 3D acceleration doesn’t work with your current configuration.

You need a xorg.conf for your Radeon HD6870.

Please run the "lspci" command to get the BusID of your Radeon HD6870.

After that create a /etc/X11/xorg.conf with the following content:

Code: Select all

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Device"
Identifier "Device0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth	24
Modes "1920x1080_75.00"
EndSubSection
EndSection
Then modify the entry BusID with the value you got with the lspci command for example BusID "PCI:1:0:0". Maybe you have to change the display mode.

Good luck!

Cheers,
Christian
Hi Christian
Thanks for your help
I do as you say and glsgears is running with this output
306 frames in 5.0 seconds = 61.139 FPS
300 frames in 5.0 seconds = 59.884 FPS
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 869 requests (653 known processed) with 0 events remaining.

Supertuxkart is running with a nice speed.
Very nice.
Do you think you can add Worker to Fienix?
Cheers,
Peter (Musa)
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Fienix - New PowerPC Distro

Post by xeno74 »

Hi Musa,

Fantastic news! Well done! :-)

Could you please post the output of the following commands?

Code: Select all

vblank_mode=0 glxgears

Code: Select all

glxinfo | grep -i opengl
BTW, here are some downloads of worker: supertuxkart-amiga.de

Installation instructions for Worker

Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Post Reply