(X)(L)ubuntu (MATE) 16.04 LTS

[papaoskar]

Here I am again: See the last screen reached with kernel 4.20 an the Mate-image from spectre with NI-suffix.
How to put pictures in here?

With the "Upload-attachent" beside the Options. You will see if you write an Posting

How blind I am! Thank you very much to enlighten me! Here comes the screen shot:

[xeno74]

Here I am again: See the last screen reached with kernel 4.20 an the Mate-image from spectre with NI-suffix.

I think there is something wrong with the USB flash drive. Would you mind coping the NI img to another USB flash drive?

[papaoskar]

My next question: How has the structure of the CF-Card to look like?
My card looks as this : Is this okay?

[papaoskar]

Hi Xeno,
Taken your advice and did another dd for the 8GB stick. Took around 48 minutes!

What about copying the stick content to a HDD partition? And then boot the HDD partition?

[zappa2009]

What about copying the stick content to a HDD partition? And then boot the HDD partition?

Yes this is possible.
But you need the right /dev/sdx argument for dd.
After dd you need to update/change the /etc/fstab with the new UUID for the rootfs there.
Because the UUID is different.

I test this with the Opensuse13.2 and fedora17 images bevor. I must update /etc/fstab otherwise the boot hangs at "Cant find an rootfs ...."

[xeno74]

My next question: How has the structure of the CF-Card to look like?
My card looks as this : Is this okay?

Hi Papaoskar,

Well, you only need the kernels and initrds on your CF card.

Cheers,

Christian

[papaoskar]

My next question: How has the structure of the CF-Card to look like?
My card looks as this : Is this okay?

Hi Papaoskar,

Well, you only need the kernels and initrds on your CF card.

Cheers,

Christian

Hi Christian,
but where do the kernel modules go? As every kernel seems to have different modules it is important question. Up to now I copied the kernel modules directory on to the target drive /lib

[xeno74]

Hi Christian,
but where do the kernel modules go?

You could copy some kernel modules directories to /lib/modules if you like.

For example the kernel modules directory for the stable longterm kernel 4.1.20:

Code: Select all

sudo cp -R 4.1.20_A-EON_AmigaONE_X1000_Nemo /lib/modules/

[papaoskar]

I always get the message: Failed to load modules. They were not found. This was the reason why I asked, where the modules belong.

[xeno74]

I always get the message: Failed to load modules. They were not found. This was the reason why I asked, where the modules belong.

I have this message too and nevertheless all my kernel modules are working.

@All

ubuntu MATE 16.04 Final Beta is out!



Julian has recently released a new image of the final beta for the AmigaONE X1000 with Radeon HD Northern Islands graphics cards.

Download: Ubuntu-Mate_16.04-X1000-NI-2.img.7z