Welcome aboard lucaricossa
Great Stuff!
Welcome First Contact customers
Re: Welcome First Contact customers
~Yes I am a Kiwi, No, I did not appear as an extra in 'Lord of the Rings'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
- nbache
- Beta Tester
- Posts: 1716
- Joined: Mon Dec 20, 2010 7:25 pm
- Location: Copenhagen, Denmark
- Contact:
Re: Welcome First Contact customers
Welcome Luca!
I use AmigaNetFS (found on Aminet) between all my AmigaOS machines, that usually works nicely for transferring files - the advantage over FTP (which Lyle suggests) being that the files keep their timestamps and protection bits.
But if you have really large amounts to transfer, hooking up your drive directly is probably preferable. And yes, both the IDE and the SATA interfaces should be fully compatible with those on your A1. You don't mention whether you SiI card is an IDE (0680) or a SATA (3112/3114/3512) one, but all should be bog standard and let you move the disks over to the X1000.
Best regards,
Niels
I use AmigaNetFS (found on Aminet) between all my AmigaOS machines, that usually works nicely for transferring files - the advantage over FTP (which Lyle suggests) being that the files keep their timestamps and protection bits.
But if you have really large amounts to transfer, hooking up your drive directly is probably preferable. And yes, both the IDE and the SATA interfaces should be fully compatible with those on your A1. You don't mention whether you SiI card is an IDE (0680) or a SATA (3112/3114/3512) one, but all should be bog standard and let you move the disks over to the X1000.
Best regards,
Niels
- lucaricossa
- Posts: 21
- Joined: Mon Jun 20, 2011 1:12 pm
- Location: Geneva CH
- Contact:
Re: Welcome First Contact customers
thank you all. I tried to configure different ftp servers on my A1 and could not acces them from my SAM. Unable to configure the server correctly.
BTW, the Sil is IDE
BTW, the Sil is IDE
- nbache
- Beta Tester
- Posts: 1716
- Joined: Mon Dec 20, 2010 7:25 pm
- Location: Copenhagen, Denmark
- Contact:
Re: Welcome First Contact customers
Right, so all your old disks will be IDE.lucaricossa wrote:BTW, the Sil is IDE
They should hook up just fine to the IDE port on the X1000 motherboard, where they will be seen by the sb600ide.device.
Just make sure you set the master/slave jumpers on the drives correctly depending on which of the plugs on the cable each one uses. And do use proper 80-lead PATA cables.
Best regards,
Niels
- trevordick
- A-Eon Technology
- Posts: 1385
- Joined: Mon Dec 20, 2010 1:28 pm
Re: Welcome First Contact customers
Welcome from french X1000 owners
Content de vous trouver là !
Jacques Vanhove
Content de vous trouver là !
Jacques Vanhove
AmigaOne XE, µA1, Sam 440ep, Sam Flex 800 MHz, Sam 460 ex, X1000 and more...
Re: Welcome First Contact customers
Welcome aboard, you must be the first in Geneva and can be in Switzerland.
Bienvenue à bord, vous devez être le première à Genève et peut être en Suisse.
Regards.
Lisardo R. ( Amiga -NG user forum )
Bienvenue à bord, vous devez être le première à Genève et peut être en Suisse.
Regards.
Lisardo R. ( Amiga -NG user forum )
Amiga 1200 / Blizzard 1260 / Mediator 1200 / Voodoo 3000 / 64 Mb / AmigaOS 3.9
Sam Flex 440ep 733 Mhz / AmigaOS 4.1 u 4
AmigaONE X1000
Sam Flex 440ep 733 Mhz / AmigaOS 4.1 u 4
AmigaONE X1000
- lucaricossa
- Posts: 21
- Joined: Mon Jun 20, 2011 1:12 pm
- Location: Geneva CH
- Contact:
Re: Welcome First Contact customers
Je sais que le patron de RELEC en a un, donc je ne suis pas le premier en Suisse!
Re: Welcome First Contact customers
OK, en tout cas, félicitations pour votre acquisition.
OK, anyway, congratulations on your acquisition.
OK, anyway, congratulations on your acquisition.
Amiga 1200 / Blizzard 1260 / Mediator 1200 / Voodoo 3000 / 64 Mb / AmigaOS 3.9
Sam Flex 440ep 733 Mhz / AmigaOS 4.1 u 4
AmigaONE X1000
Sam Flex 440ep 733 Mhz / AmigaOS 4.1 u 4
AmigaONE X1000
- lucaricossa
- Posts: 21
- Joined: Mon Jun 20, 2011 1:12 pm
- Location: Geneva CH
- Contact:
Re: Welcome First Contact customers
Thanks (everybody). Btw, I am still unable to log into the secure part of aeon site. What did I miss ?trevordick wrote:Welcome from me too!
Trevor
Luca