I downloaded it from here:
https://fienixppc.blogspot.com/p/cfe.html?m=1
1) Instead of an USB stick I used an USB HDD
2) I took all the steps (switching around the keyboard to another port after entering CFE)
It starts to load all the stuff with many green OKs on the left side, but ends up with a black screen when it probably should load in the Fienix GUI.
Anyone have a fix for that behaviour?
Do I maybe need the keyboard back in port 1 to make fienix boot?
...
Thank you, looking for an alternative to use the x1000 hardware...
Anyone got Fienix to run?
Anyone got Fienix to run?
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
- MichaelMerkel
- Beta Tester
- Posts: 355
- Joined: Mon Dec 20, 2010 2:08 pm
- Location: Germany
- Contact:
Re: Anyone got Fienix to run?
Michael Merkel
(Member of Amiga Freunde Pfalz)
(Member of Amiga Freunde Pfalz)
Re: Anyone got Fienix to run?
You are not authorised to read this forum.
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
- nbache
- Beta Tester
- Posts: 1716
- Joined: Mon Dec 20, 2010 7:25 pm
- Location: Copenhagen, Denmark
- Contact:
Re: Anyone got Fienix to run?
It leads to a thread in the forum "Platform: AmigaOne X1000 - Linux Only”.
IIRC, the "... Linux only" forums are only shown if you haven't deselected them. In the infancy of those forums, a lot of people complained that they weren't interested in all the Linux material, so some form of preference was deviced to let you deselect them.
But I can't find anything in my settings that deals with that.
Does anyone remember how it can be manipulated?
Best regards,
Niels
IIRC, the "... Linux only" forums are only shown if you haven't deselected them. In the infancy of those forums, a lot of people complained that they weren't interested in all the Linux material, so some form of preference was deviced to let you deselect them.
But I can't find anything in my settings that deals with that.
Does anyone remember how it can be manipulated?
Best regards,
Niels
- MichaelMerkel
- Beta Tester
- Posts: 355
- Joined: Mon Dec 20, 2010 2:08 pm
- Location: Germany
- Contact:
Re: Anyone got Fienix to run?
afaik you need to contact the moderator of this site. you cannot dis-/enable it on your own.nbache wrote: ↑Wed Oct 14, 2020 3:54 pm It leads to a thread in the forum "Platform: AmigaOne X1000 - Linux Only”.
IIRC, the "... Linux only" forums are only shown if you haven't deselected them. In the infancy of those forums, a lot of people complained that they weren't interested in all the Linux material, so some form of preference was deviced to let you deselect them.
But I can't find anything in my settings that deals with that.
Does anyone remember how it can be manipulated?
regards...
michael
Michael Merkel
(Member of Amiga Freunde Pfalz)
(Member of Amiga Freunde Pfalz)
- MichaelMerkel
- Beta Tester
- Posts: 355
- Joined: Mon Dec 20, 2010 2:08 pm
- Location: Germany
- Contact:
Re: Anyone got Fienix to run?
quick quote from there until you get access:
but it did not work for me. i used my old card and then installed/executed the bandage tool. after that also the newer card booted.Please try using Fienix-GPU-Bandage:
- Boot up your system, when the black screen appears press CTRL + ALT + F1 to switch to console
- Log in as su
- Enter "apt-get install fienix-gpu-bandage"
- Enter "fienix-gpu-bandage"
- Press 1 for Yes
- Reboot
regards...
michael
Michael Merkel
(Member of Amiga Freunde Pfalz)
(Member of Amiga Freunde Pfalz)
Re: Anyone got Fienix to run?
@MichaelMerkel
Thanks for the quote.
Will try, but I dont think I'll go through adding an older card just to be able to boot.
Isn't there possibility to use that bandage by default and ask the user on startup if he/she wants to use it or not?
Thanks for the quote.
Will try, but I dont think I'll go through adding an older card just to be able to boot.
Isn't there possibility to use that bandage by default and ask the user on startup if he/she wants to use it or not?
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Re: Anyone got Fienix to run?
Is there anyone capable of de-locking me from the linux forums?
Tia
Tia
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Re: Anyone got Fienix to run?
Since i'm still locked out of the linux forums and no one seems to care, i'll post here again
I got it to run a little further, but after some short time of massive text scrolling i get
Begin: Running /scripts/local-block ... done.
over and over again, until after some time i get
Gave up waiting for root device.
...
ALERT! LABEL=FIENIX-DISK does not exist!
Dropping to a shell
Any hints on how to fix that?
I have, of course, tried to drop the whole "LABEL=" part from the CFE line, but that didn't help.
FIENIX-DISK does not exist!
I'm out of ideas.
I got it to run a little further, but after some short time of massive text scrolling i get
Begin: Running /scripts/local-block ... done.
over and over again, until after some time i get
Gave up waiting for root device.
...
ALERT! LABEL=FIENIX-DISK does not exist!
Dropping to a shell
Any hints on how to fix that?
I have, of course, tried to drop the whole "LABEL=" part from the CFE line, but that didn't help.
FIENIX-DISK does not exist!
I'm out of ideas.
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Re: Anyone got Fienix to run?
I dont'know, if I remember it exactly, it is some time ago when I istalled Fienix. Please, take it like advice and not exact manual.
I do not boot from image on usb.
First, I boot to other linux (Debian i my case), prepare HDD and create ext4 partition ( for example/dev/sdb6 ) for fienix.
Then I mount fienix image ( maybe something like # mount -o loop fienix.img /mnt/image ) and fienix partition # mount /dev/sdb6 /mnt/sdx
and then # rsync -vrlAogt /mnt/image /mnt/sdx ( sorry, don't remember exact params)
then I use last stable kernel from xeno74 ( unfortunatelly is on AmigaOne X1000 - Linux Only ) and copy it to my usb stick (or cfcard)
and booting via:
setenv bootargs "root=/dev/sdb6 rootdelay=5"
boot -elf -noints -fs=ext2 usbdisk0:vmlinux
Micro A1-C (G3/1.2 GHz), AmigaOne XE (G4/1.4 GHz), Pegasos II (G4/1.33 GHz), Sam440ep, Sam440ep-flex, AmigaOne X1000
Efika 5200b, Pegasos I, Powerbook, Mac Mini (1.83 GHz), iMac, Powermac Quad
AmigaOS, MorphOS, linux, MacOS X
Efika 5200b, Pegasos I, Powerbook, Mac Mini (1.83 GHz), iMac, Powermac Quad
AmigaOS, MorphOS, linux, MacOS X