@tommysammy:
Sent privately a new beta (shouldn't make any difference).
Are you using hdaudio.audio V6.22?
To set te sliders volume to default, use menu option 'Edit->Reset to default' and then click on save.
Silly question: Without using Mixer sound volume control is ok with AmigaAMP?
@tommysammy and @zzd10h:
Can you post your AHI prefs (maybe there is something different)?
Mixer/Mixer.docky BETA supporting hdaudio V6.22
- tommysammy
- Posts: 946
- Joined: Mon Dec 20, 2010 9:03 pm
- Location: Isselburg,Germany
- Contact:
Re: Mixer.docky BETA supporting hdaudio V6.22
Tested the latest beta . No luck again.
I hope this screenshots give you all answer that you need
I hope this screenshots give you all answer that you need
AmigaOne X1000 Betatester A1-X1090
AmigaOne X1000/4GB Ram/Saphire Radeon 7850 1GB/256GB SSD HD/2GB CF Card/RTL8169Network
AmigaOne X1000/4GB Ram/Saphire Radeon 7850 1GB/256GB SSD HD/2GB CF Card/RTL8169Network
Re: Mixer.docky BETA supporting hdaudio V6.22
Hello Javier,
It works for me too. On Tommy's screenshot, it seems to test with mute button on (at top of the masterslider) maybe it's why it does not work for him. I know it's a beta version, but find the sound decrease when using the master slider or the docky is a bit fast IMHO compared to applicatons internal sound controller. Other sliders seem to react differently when moving them (slower)!
Thanks again for your work!
Regards,
Xavier.
It works for me too. On Tommy's screenshot, it seems to test with mute button on (at top of the masterslider) maybe it's why it does not work for him. I know it's a beta version, but find the sound decrease when using the master slider or the docky is a bit fast IMHO compared to applicatons internal sound controller. Other sliders seem to react differently when moving them (slower)!
Thanks again for your work!
Regards,
Xavier.
Re: Mixer.docky BETA supporting hdaudio V6.22
@Thomas
http://forum.hyperion-entertainment.biz ... =30#p29046
@Javier
I can't post my settings this week-end
http://forum.hyperion-entertainment.biz ... =30#p29046
@Javier
I can't post my settings this week-end
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
- LyleHaze
- AmigaOS Core Developer
- Posts: 525
- Joined: Sat Jun 18, 2011 4:06 pm
- Location: North Florida, near the Big Bend
Re: Mixer.docky BETA supporting hdaudio V6.22
The 2 leftmost sliders are recording gain and recording volume.zzd10h wrote:Why are the 2 leftmost sliders at minimum ?
These will have no effect unless you are recording.
- javierdlr
- Beta Tester
- Posts: 389
- Joined: Sun Jun 19, 2011 10:13 pm
- Location: Donostia (GUIPUZCOA) - Spain
- Contact:
Re: Mixer.docky BETA supporting hdaudio V6.22
@tommysammy:
What happens if you use menu option 'Edit->Reset to default'?
Does Master MUTE work? Can you set it On/Off?
IIRC it should set hdaudio values/mutes to (left to right):
0.0dB 22.5dB 0.0dB and all mutes off (not selected)
Try to quit/exit MIXER and delete 'ENVARC:Mixer.prefs' and 'ENV:Mixer.prefs' , restart Mixer and show here slider/mutes values.
BTW: can anyone with a X1000 set AHI prefs like tommysammy has and try Mixer?
TIA
What happens if you use menu option 'Edit->Reset to default'?
Does Master MUTE work? Can you set it On/Off?
IIRC it should set hdaudio values/mutes to (left to right):
0.0dB 22.5dB 0.0dB and all mutes off (not selected)
Try to quit/exit MIXER and delete 'ENVARC:Mixer.prefs' and 'ENV:Mixer.prefs' , restart Mixer and show here slider/mutes values.
BTW: can anyone with a X1000 set AHI prefs like tommysammy has and try Mixer?
TIA
- AlfredOne
- Beta Tester
- Posts: 135
- Joined: Wed Dec 22, 2010 11:45 pm
- Location: Terlizzi (BA) , Italy
- Contact:
Re: Mixer.docky BETA supporting hdaudio V6.22
I will try on next monday.javierdlr wrote:@tommysammy:
BTW: can anyone with a X1000 set AHI prefs like tommysammy has and try Mixer?
TIA
Amiga500 Kickstart1.3
AmigaONE XE G4 833MHz - 2GB RAM - Radeon9200 256MB
AmigaONE X1000 - 2GB RAM
AmigaONE XE G4 833MHz - 2GB RAM - Radeon9200 256MB
AmigaONE X1000 - 2GB RAM
- Radeon R9-280X 3GB
- Radeon HIS4670 1GB DDR3
- Radeon RX550
- javierdlr
- Beta Tester
- Posts: 389
- Joined: Sun Jun 19, 2011 10:13 pm
- Location: Donostia (GUIPUZCOA) - Spain
- Contact:
Re: Mixer.docky BETA supporting hdaudio V6.22
The "speed" of the slider movement is internally configured (some kind of step/jump value) some sliders has 16 steps/jumps other 32 other 127,... more steps/jumps means more "accurate" (it jumps +/-0.2dB instead of +/-2dB), but you need to move the slider more sometimes to reach some values.Petrol wrote:Hello Javier,
It works for me too. On Tommy's screenshot, it seems to test with mute button on (at top of the masterslider) maybe it's why it does not work for him. I know it's a beta version, but find the sound decrease when using the master slider or the docky is a bit fast IMHO compared to applicatons internal sound controller. Other sliders seem to react differently when moving them (slower)!
Thanks again for your work!
Regards,
Xavier.
- tommysammy
- Posts: 946
- Joined: Mon Dec 20, 2010 9:03 pm
- Location: Isselburg,Germany
- Contact:
Re: Mixer.docky BETA supporting hdaudio V6.22
This happens when i delete ENV:Mixer.prefsjavierdlr wrote:@tommysammy:
What happens if you use menu option 'Edit->Reset to default'?
Does Master MUTE work? Can you set it On/Off?
IIRC it should set hdaudio values/mutes to (left to right):
0.0dB 22.5dB 0.0dB and all mutes off (not selected)
Try to quit/exit MIXER and delete 'ENVARC:Mixer.prefs' and 'ENV:Mixer.prefs' , restart Mixer and show here slider/mutes values.
BTW: can anyone with a X1000 set AHI prefs like tommysammy has and try Mixer?
TIA
Now i doesn`t see the X1000 soundchip
Master Mute works i can set it on/off but has no effect to my sound output
AmigaOne X1000 Betatester A1-X1090
AmigaOne X1000/4GB Ram/Saphire Radeon 7850 1GB/256GB SSD HD/2GB CF Card/RTL8169Network
AmigaOne X1000/4GB Ram/Saphire Radeon 7850 1GB/256GB SSD HD/2GB CF Card/RTL8169Network
- javierdlr
- Beta Tester
- Posts: 389
- Joined: Sun Jun 19, 2011 10:13 pm
- Location: Donostia (GUIPUZCOA) - Spain
- Contact:
Re: Mixer.docky BETA supporting hdaudio V6.22
Ok. Out of ideas now.tommysammy wrote:This happens when i delete ENV:Mixer.prefsjavierdlr wrote:@tommysammy:
What happens if you use menu option 'Edit->Reset to default'?
Does Master MUTE work? Can you set it On/Off?
IIRC it should set hdaudio values/mutes to (left to right):
0.0dB 22.5dB 0.0dB and all mutes off (not selected)
Try to quit/exit MIXER and delete 'ENVARC:Mixer.prefs' and 'ENV:Mixer.prefs' , restart Mixer and show here slider/mutes values.
BTW: can anyone with a X1000 set AHI prefs like tommysammy has and try Mixer?
TIA
Now i doesn`t see the X1000 soundchip
Master Mute works i can set it on/off but has no effect to my sound output
Just do the same (delete mixer.prefs, reboot sustem, unarchive BETA6 and try again) but with original BETA6 from previous post.
Will send you another test versipn ASAP, aka tomorrow.