Audioevolution4 looks good, and it is free. Excellent.
A small donation shall be forthcoming if it works well.
HDAudio driver for X1000 onboard sound
Re: HDAudio driver for X1000 onboard sound
Audio Evolution 4, HD-Rec and SoundFX all can be had for free these days, I believe. We are very blessed! Tonight, I hope to get back to figuring out why my levels are so hot...
Re: HDAudio driver for X1000 onboard sound
In SoundFX, there is a gain slider among the AHI settings that goes from 1.0 to 100. Even slammed to the left at 1.0 the incoming signal on the blue line level input is still way too hot. But when I press the "auto" button to the right of this slider the value keeps dropping all the way down to -271. At this point the incoming level is low enough to get a clean recording.
And I am thinking (but too tired to verify at the moment) that at this point that leaves AHI in a state so that I can make a clean recording in AHIRecord as well. That would explain my one success mentioned above.
But reboot and it's back to the super high, overdriven input level.
Just can't figure out what else to try from this end. But I am certainly open to the possibility that I am going wrong somewhere.
And I am thinking (but too tired to verify at the moment) that at this point that leaves AHI in a state so that I can make a clean recording in AHIRecord as well. That would explain my one success mentioned above.
But reboot and it's back to the super high, overdriven input level.
Just can't figure out what else to try from this end. But I am certainly open to the possibility that I am going wrong somewhere.
- TSK
- Beta Tester
- Posts: 225
- Joined: Mon Dec 20, 2010 1:15 pm
- Location: Home land of Santa C., sauna, sisu and salmiakki
Re: HDAudio driver for X1000 onboard sound
I have this issue as well. Reported.
Keep the party going !
Re: HDAudio driver for X1000 onboard sound
@mbrantley
Does the "AHI Preferences/Advanced Settings/Volume Scaling" make any difference? Maybe that's only an output setting but it might be worth trying.
Does the "AHI Preferences/Advanced Settings/Volume Scaling" make any difference? Maybe that's only an output setting but it might be worth trying.
AmigaOne X1000 with 2GB memory - OS4.1 FE
- LyleHaze
- AmigaOS Core Developer
- Posts: 525
- Joined: Sat Jun 18, 2011 4:06 pm
- Location: North Florida, near the Big Bend
Re: HDAudio driver for X1000 onboard sound
The driver is distributed by AmiUpdate.Where do I find the driver for download?
The problem with input gain has been confirmed and a fix is in progress.
Re: HDAudio driver for X1000 onboard sound
Thanks for your hard work. One question: Do the AHI mode settings (16 bit, 32 bit) affect the input mode? In other words, is the input always 16bit or is it 32bit when a 32 bit mode is set in AHI?LyleHaze wrote: The problem with input gain has been confirmed and a fix is in progress.
AmigaOne X1000 with 2GB memory - OS4.1 FE
- LyleHaze
- AmigaOS Core Developer
- Posts: 525
- Joined: Sat Jun 18, 2011 4:06 pm
- Location: North Florida, near the Big Bend
Re: HDAudio driver for X1000 onboard sound
The recording mode is always set to 16 bit. The reason is these bits of document from the AHI developers archive:xenic wrote: Do the AHI mode settings (16 bit, 32 bit) affect the input mode? In other words, is the input always 16bit or is it 32bit when a 32 bit mode is set in AHI?
"bit AHISB_RECORD in flags is set"
...
"The format should always be AHIST_S16S"
...
"The message should be filled as follows:
ahirm_Type - Set to AHIST_S16S.
ahirm_Buffer - A pointer to the filled buffer.
ahirm_Samples - How many sample frames stored."
It may be possible to feed it something else, but I tend to follow the rules when the documents are that specific.
LyleHaze
Re: HDAudio driver for X1000 onboard sound
I activated AmiUpdate and got around 20 updates. None of them seemed to have anything to do with audio.LyleHaze wrote:The driver is distributed by AmiUpdate.ggw wrote:Where do I find the driver for download?
Where do I find the existing "driver" so I can look at its install date and the version #?
I'll look into why AmiUpdate isn't running automatically. I thought I had set it up that way... recently?
ggw
George Wyche