Oh, well,
Perhaps when you get your Sam, you will be able to connect its serial port to the X1k and see the debug output.
New here
- tonyw
- AmigaOS Core Developer
- Posts: 1479
- Joined: Wed Mar 09, 2011 1:36 pm
- Location: Sydney, Australia
Re: New here
cheers
tony
tony
Re: New here
I have ordered this here now. https://amigakit.amiga.store/amigaone-x ... bqAmR-NvYU
I should probably be able to use a serial for usb and then a windows laptop?
AmigaX1000
Follow me on twitter @basjoo_dk
Follow me on twitter @basjoo_dk
Re: New here
@musa
I got the same (prebuild) in my x1000.
It works with windows and a software serial logger (i.e. PuTTY).
You need the correct settings though.
I'm not at home and can't post the ones I use, but maybe others can.
I got the same (prebuild) in my x1000.
It works with windows and a software serial logger (i.e. PuTTY).
You need the correct settings though.
I'm not at home and can't post the ones I use, but maybe others can.
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Re: New here
@musa
Check the part "Serial<->USB"
Of course just like i and many others do. Just correct cable + putty on the win32 side. There is an article i wrote about: https://wiki.amigaos.net/wiki/Advanced_ ... ging_GuideI should probably be able to use a serial for USB and then a windows laptop?
Check the part "Serial<->USB"
Re: New here
thanks for the good advice and info.kas1e wrote: ↑Sat Feb 12, 2022 4:10 pm @musaOf course just like i and many others do. Just correct cable + putty on the win32 side. There is an article i wrote about: https://wiki.amigaos.net/wiki/Advanced_ ... ging_GuideI should probably be able to use a serial for USB and then a windows laptop?
Check the part "Serial<->USB"
Do you know if there is anyone who sells a ready-made null modem set?
AmigaX1000
Follow me on twitter @basjoo_dk
Follow me on twitter @basjoo_dk
- nbache
- Beta Tester
- Posts: 1714
- Joined: Mon Dec 20, 2010 7:25 pm
- Location: Copenhagen, Denmark
- Contact:
Re: New here
Proshop have both the cable and the adapter.
Here's a USB/serial adapter:
https://www.proshop.dk/Parallel-Seriel- ... er/2469179
It has a male serial plug, so you'd need a female to female null-modem cable, which is here:
https://www.proshop.dk/Parallel-Seriel- ... le/2472991
- but that says they have to order it, and it can take 12-13 days.
An alternative could be to get a male to female null-modem cable like this
https://www.proshop.dk/Parallel-Seriel- ... FM/2420040
- and a gender-changer like this
https://www.proshop.dk/Parallel-Seriel- ... FF/2478520
Best regards,
Niels
Here's a USB/serial adapter:
https://www.proshop.dk/Parallel-Seriel- ... er/2469179
It has a male serial plug, so you'd need a female to female null-modem cable, which is here:
https://www.proshop.dk/Parallel-Seriel- ... le/2472991
- but that says they have to order it, and it can take 12-13 days.
An alternative could be to get a male to female null-modem cable like this
https://www.proshop.dk/Parallel-Seriel- ... FM/2420040
- and a gender-changer like this
https://www.proshop.dk/Parallel-Seriel- ... FF/2478520
Best regards,
Niels
Re: New here
Thanks for the help Niels.
We are almost neighbors, I can see (living in Nivå).
I have a lot of things I need to bring home from Proshop when I get my Sam640 board, so I buy the cables there too.
Can you not just tell me how many wat your power supply in your sam640 have ? is 450 wat ok
Regards Peter
We are almost neighbors, I can see (living in Nivå).
I have a lot of things I need to bring home from Proshop when I get my Sam640 board, so I buy the cables there too.
Can you not just tell me how many wat your power supply in your sam640 have ? is 450 wat ok
Regards Peter
AmigaX1000
Follow me on twitter @basjoo_dk
Follow me on twitter @basjoo_dk
- nbache
- Beta Tester
- Posts: 1714
- Joined: Mon Dec 20, 2010 7:25 pm
- Location: Copenhagen, Denmark
- Contact:
Re: New here
Yep, I'm in Ørholm north of Lyngby. Used to live in Nivå (Niverød) for a few years back in the seventies, actually .
I use a Corsair 450 W PSU in my Sam460ex, and that's working fine with a Radeon HD 5450, an SiI3114 SATA card, and a sound card (don't remember the exact name, but it's one of those with the coloured sockets spread over two separate backplates), plus a conventional HD and an SSD (and an internal SD card).
Best regards,
Niels
I use a Corsair 450 W PSU in my Sam460ex, and that's working fine with a Radeon HD 5450, an SiI3114 SATA card, and a sound card (don't remember the exact name, but it's one of those with the coloured sockets spread over two separate backplates), plus a conventional HD and an SSD (and an internal SD card).
Best regards,
Niels
Re: New here
Hi Niels
Ok I live in Niverød . Moved here from Fredensborg 3 years ago
Thanks for the info on power supply.
Then I will buy this one, it fits my new tower .
https://www.proshop.dk/Stroemforsyning/ ... us/2485126
And now I'm just waiting for Acube
I will return when there is news
Have a nice day
Peter
Ok I live in Niverød . Moved here from Fredensborg 3 years ago
Thanks for the info on power supply.
Then I will buy this one, it fits my new tower .
https://www.proshop.dk/Stroemforsyning/ ... us/2485126
And now I'm just waiting for Acube
I will return when there is news
Have a nice day
Peter
AmigaX1000
Follow me on twitter @basjoo_dk
Follow me on twitter @basjoo_dk
- nbache
- Beta Tester
- Posts: 1714
- Joined: Mon Dec 20, 2010 7:25 pm
- Location: Copenhagen, Denmark
- Contact:
Re: New here
Hmm, it says "Varen er udgået" (item is discontinued), so that might be difficult. But I can see several others you can choose instead if you follow their link to similar items.
Best regards,
Niels
Best regards,
Niels