Keyboard randomly (not)recognized by AmigaOS
Posted: Mon Apr 06, 2020 10:49 pm
Hi,
I have a Sam460ex motherboard, with Amiga OS 4.1 installed on a SSD connected via SATA.
And I'm having problems with a keyboard connected to the internal USB ports of the motherboard.
When AmigaOS 4.1 boots, the keyboard is (almost always) not (completely)recognized. If I disconnect and reconnect the keyboard a couple of times it's finally recognized, numlock lights up and the keystrokes are recognized. If after the keyboard works, I disconnect and reconnect it again, it's not recognized again.
Here is what usb.log says. I've highlighted in red the 'keyboard events' when I'm disconnecting and reconnecting on various ports (J13a and J13b) it until it works.
I: [20:41:18] USB stack | | ==========
I: [20:41:18] USB stack | | USB System Software Task started
I: [20:41:18] USB stack | | Starting HCDs...
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FD20 at level -1
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FDC0 at level 0
I: [20:41:19] EHCI Controller Task Unit 0 | EHCI | Another driver seems to use the PPC460ex USB hardware. Sending shut down notification.
W: [20:41:19] OHCI Controller Task Unit 0 | OHCI | Received request to shutdown unit 0.
W: [20:41:19] OHCI Controller Task Unit 0 | OHCI | Releasing lock for unit 0.
I: [20:41:19] EHCI Controller Task Unit 0 | EHCI | Successfully locked PPC460ex USB hardware.
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FE60 at level -1
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FF00 at level 0
I: [20:41:19] USB stack | | ...HCDs started.
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FDC0 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FF00 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FDC0 initialized
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FF00 initialized
I: [20:41:19] hub.usbfd | HUB | Hub "Rear Roothub (ohci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [20:41:19] hub.usbfd | HUB | Hub "Rear Roothub (ehci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [20:41:19] hub.usbfd | HUB | All ports are empty
I: [20:41:19] hub.usbfd | HUB | All ports are empty
I: [20:41:19] hub.usbfd | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [20:41:19] hub.usbfd | HUB | Device found on port 1 of hub "Rear Roothub (ehci.usbhcd/0)".
I: [20:41:19] hub.usbfd | Hub port | Device at port 1 of hub "Rear Roothub (ehci.usbhcd/0)" is high-speed.
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FDA1150 at level 1
I: [20:41:19] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [20:41:19] EHCI Controller Task Unit 0 | EHCI | Port 0 is not in reset state.
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FDA1150 is {Vendor: 0x0424, Product: 0x2517, Class: 09.00}
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FDA1150 initialized
I: [20:41:19] hub.usbfd | HUB | Now configured to use multiple TTs
I: [20:41:19] hub.usbfd | HUB | Hub "" has TT thinktime of 8 full speed bittimes and protocol 2
I: [20:41:20] hub.usbfd | HUB | Device found on port 2 of hub "".
I: [20:41:21] hub.usbfd | Hub port | Device at port 2 of hub "" is low-speed.
I: [20:41:21] USB stack | New Fkt | Fkt 0x6FDA1290 at level 2
I: [20:41:21] hub.usbfd | HUB | Device on hub port 2 successfully added.
I: [20:41:21] hub.usbfd | HUB | Device found on port 7 of hub "".
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1290 is {Vendor: 0x1241, Product: 0x1177, Class: 00.00}
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1290 initialized
I: [20:41:21] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed.
I: [20:41:21] USB stack | New Fkt | Fkt 0x6FDA13D0 at level 2
I: [20:41:21] hub.usbfd | HUB | Device on hub port 7 successfully added.
I: [20:41:21] hub.usbfd | HUB | Driver Running
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA13D0 is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}
I: [20:41:21] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA13D0 initialized
I: [20:41:21] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [20:41:21] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:41:21] USB stack | New Fkt | Fkt 0x6FDA1510 at level 2
I: [20:41:21] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1510 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:41:21] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1510 initialized
E: [20:41:21] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:41:23] USB stack Process | | USB System Software Process started.
I: [20:41:23] USB stack Process | | Reading FD descriptors...
I: [20:41:23] USB stack Process | | ...FD infos read
I: [20:41:23] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x6FDA3300 is being preempted.
I: [20:41:23] USB stack Process | | Starting HCDs...
I: [20:41:23] USB stack Process | | ...HCDs started.
I: [20:41:23] USB stack Process | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [20:41:23] USB stack Process | | USB stack fullbooted
I: [20:41:24] hid.usbfd | HID driver | USB Interface bound
I: [20:42:51] hub.usbfd | HUB | Detaching Function removed from hub port 6
I: [20:42:51] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:42:51] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:51] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:42:51] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:51] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:42:52] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:52] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:42:52] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:52] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:42:52] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:42:52] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:42:57] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:42:57] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:42:57] USB stack | New Fkt | Fkt 0x6fda1510 at level 2
I: [20:42:58] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:42:58] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:42:58] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:42:58] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 initialized
E: [20:42:58] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:42:59] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:42:59] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:42:59] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:42:59] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:43:00] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:43:00] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:43:00] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:43:00] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:43:00] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:44:34] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:44:35] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:44:35] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:44:35] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:44:35] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:44:35] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:44:36] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:44:36] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:44:36] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:44:36] hub.usbfd | HUB | Hub port 5 attachment was not possible
E: [20:44:36] hub.usbfd | HUB | Resetting port 5 of hub "" failed. Device adding aborted
I: [20:44:36] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:44:39] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:39] hub.usbfd | HUB | No device on port 6 of hub "" after reset
W: [20:44:39] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:40] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:40] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:40] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:40] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:41] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:41] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:44:41] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:44:41] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:44:41] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:41] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:44:41] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:41] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [20:44:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:44:41] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:44:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:44:41] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:44:53] hub.usbfd | HUB | Detaching Function removed from hub port 6
I: [20:44:53] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:53] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
W: [20:44:53] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:54] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:54] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:54] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:54] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:54] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:54] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:44:54] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:44:54] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:44:54] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:54] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:44:54] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:55] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [20:44:55] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:44:55] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:44:55] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:44:55] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:57:37] hub.usbfd | HUB | Detaching Function removed from hub port 6
I: [20:57:37] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:57:37] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:37] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:57:37] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:37] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:57:38] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:38] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:57:38] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:38] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:57:38] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:57:38] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:57:41] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:57:41] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:41] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:41] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:41] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:57:41] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:57:49] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:57:50] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:57:50] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:57:50] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:50] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:50] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:51] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:51] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:51] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:57:51] hub.usbfd | HUB | Hub port 5 attachment was not possible
E: [20:57:51] hub.usbfd | HUB | Failed to add device attached to hub port 5 due to error -19
I: [20:57:51] hub.usbfd | HUB | Hub driver was unable to
add the attached device.
I: [20:57:52] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:57:52] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:57:52] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:53] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:53] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:53] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:53] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:53] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:53] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:57:53] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:57:53] hub.usbfd | HUB | Device found on port 5 of hub "".
E: [20:57:53] USB Fkt Init | Init Fkt | Error -11 reading DevDsc
E: [20:57:53] USB Fkt Init | Init Fkt | Init failed.
E: [20:57:53] USB Fkt Init | SysFkt_Detach | Not called from USB Task - please notify graff@amigausb.dk
I: [20:57:53] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:53] USB stack | New Fkt | Fkt 0x6013bb70 at level 2
I: [20:57:53] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 initialized
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:56] USB Fkt Init | Init Fkt Setup | Fkt attachment failed
I: [20:58:54] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [20:58:55] hub.usbfd | Hub port | Device at port 1 of hub "" is high-speed.
I: [20:58:55] USB stack | New Fkt | Fkt 0x6fda1510 at level 2
I: [20:58:55] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [20:58:55] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 is {Vendor: 0x0781, Product: 0x5595, Class: 00.00}
I: [20:58:55] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 initialized
I: [20:58:55] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
W: [20:58:55] MassStorage Device Task | Massstorage | Created usbdisk.device/0
I: [20:58:59] hub.usbfd | HUB | Detaching Function removed from hub port 1
I: [20:58:59] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [20:58:59] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:58:59] hub.usbfd | HUB | Resetting hub port 1 and trying again
I: [20:59:00] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:59:00] hub.usbfd | HUB | Resetting hub port 1 and trying again
I: [20:59:00] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:59:00] hub.usbfd | HUB | Resetting hub port 1 and trying again
I: [20:59:01] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:59:01] hub.usbfd | HUB | Hub port 1 attachment was not possible
E: [20:59:01] hub.usbfd | HUB | Resetting port 1 of hub "" failed. Device adding aborted
I: [20:59:01] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:59:06] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [20:59:06] hub.usbfd | Hub port | Device at port 1 of hub "" is high-speed.
I: [20:59:06] USB stack | New Fkt | Fkt 0x5f900320 at level 2
I: [20:59:06] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [20:59:06] USB Fkt Init | Init Fkt | Fkt 0x5f900320 is {Vendor: 0x0781, Product: 0x5595, Class: 00.00}
I: [20:59:06] USB Fkt Init | Init Fkt | Fkt 0x5f900320 initialized
I hope someone knows….why AmigaOS randmonly recognizes it and randomly don't… The difference seems to be here:
NOT recognized:
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:41] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:57:41] USB FD fkt start | FD launcher | Unable to set Fkt cfg
Recognized:
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 initialized
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:56] USB Fkt Init | Init Fkt Setup | Fkt attachment failed
Thank you for your help!!
I have a Sam460ex motherboard, with Amiga OS 4.1 installed on a SSD connected via SATA.
And I'm having problems with a keyboard connected to the internal USB ports of the motherboard.
When AmigaOS 4.1 boots, the keyboard is (almost always) not (completely)recognized. If I disconnect and reconnect the keyboard a couple of times it's finally recognized, numlock lights up and the keystrokes are recognized. If after the keyboard works, I disconnect and reconnect it again, it's not recognized again.
Here is what usb.log says. I've highlighted in red the 'keyboard events' when I'm disconnecting and reconnecting on various ports (J13a and J13b) it until it works.
I: [20:41:18] USB stack | | ==========
I: [20:41:18] USB stack | | USB System Software Task started
I: [20:41:18] USB stack | | Starting HCDs...
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FD20 at level -1
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FDC0 at level 0
I: [20:41:19] EHCI Controller Task Unit 0 | EHCI | Another driver seems to use the PPC460ex USB hardware. Sending shut down notification.
W: [20:41:19] OHCI Controller Task Unit 0 | OHCI | Received request to shutdown unit 0.
W: [20:41:19] OHCI Controller Task Unit 0 | OHCI | Releasing lock for unit 0.
I: [20:41:19] EHCI Controller Task Unit 0 | EHCI | Successfully locked PPC460ex USB hardware.
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FE60 at level -1
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FF9FF00 at level 0
I: [20:41:19] USB stack | | ...HCDs started.
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FDC0 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FF00 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FDC0 initialized
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FF9FF00 initialized
I: [20:41:19] hub.usbfd | HUB | Hub "Rear Roothub (ohci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [20:41:19] hub.usbfd | HUB | Hub "Rear Roothub (ehci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [20:41:19] hub.usbfd | HUB | All ports are empty
I: [20:41:19] hub.usbfd | HUB | All ports are empty
I: [20:41:19] hub.usbfd | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [20:41:19] hub.usbfd | HUB | Device found on port 1 of hub "Rear Roothub (ehci.usbhcd/0)".
I: [20:41:19] hub.usbfd | Hub port | Device at port 1 of hub "Rear Roothub (ehci.usbhcd/0)" is high-speed.
I: [20:41:19] USB stack | New Fkt | Fkt 0x6FDA1150 at level 1
I: [20:41:19] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [20:41:19] EHCI Controller Task Unit 0 | EHCI | Port 0 is not in reset state.
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FDA1150 is {Vendor: 0x0424, Product: 0x2517, Class: 09.00}
I: [20:41:19] USB Fkt Init | Init Fkt | Fkt 0x6FDA1150 initialized
I: [20:41:19] hub.usbfd | HUB | Now configured to use multiple TTs
I: [20:41:19] hub.usbfd | HUB | Hub "" has TT thinktime of 8 full speed bittimes and protocol 2
I: [20:41:20] hub.usbfd | HUB | Device found on port 2 of hub "".
I: [20:41:21] hub.usbfd | Hub port | Device at port 2 of hub "" is low-speed.
I: [20:41:21] USB stack | New Fkt | Fkt 0x6FDA1290 at level 2
I: [20:41:21] hub.usbfd | HUB | Device on hub port 2 successfully added.
I: [20:41:21] hub.usbfd | HUB | Device found on port 7 of hub "".
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1290 is {Vendor: 0x1241, Product: 0x1177, Class: 00.00}
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1290 initialized
I: [20:41:21] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed.
I: [20:41:21] USB stack | New Fkt | Fkt 0x6FDA13D0 at level 2
I: [20:41:21] hub.usbfd | HUB | Device on hub port 7 successfully added.
I: [20:41:21] hub.usbfd | HUB | Driver Running
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA13D0 is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}
I: [20:41:21] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA13D0 initialized
I: [20:41:21] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [20:41:21] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:41:21] USB stack | New Fkt | Fkt 0x6FDA1510 at level 2
I: [20:41:21] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1510 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:41:21] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:41:21] USB Fkt Init | Init Fkt | Fkt 0x6FDA1510 initialized
E: [20:41:21] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:41:23] USB stack Process | | USB System Software Process started.
I: [20:41:23] USB stack Process | | Reading FD descriptors...
I: [20:41:23] USB stack Process | | ...FD infos read
I: [20:41:23] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x6FDA3300 is being preempted.
I: [20:41:23] USB stack Process | | Starting HCDs...
I: [20:41:23] USB stack Process | | ...HCDs started.
I: [20:41:23] USB stack Process | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [20:41:23] USB stack Process | | USB stack fullbooted
I: [20:41:24] hid.usbfd | HID driver | USB Interface bound
I: [20:42:51] hub.usbfd | HUB | Detaching Function removed from hub port 6
I: [20:42:51] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:42:51] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:51] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:42:51] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:51] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:42:52] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:52] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:42:52] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:42:52] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:42:52] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:42:52] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:42:57] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:42:57] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:42:57] USB stack | New Fkt | Fkt 0x6fda1510 at level 2
I: [20:42:58] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:42:58] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:42:58] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:42:58] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 initialized
E: [20:42:58] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:42:59] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:42:59] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:42:59] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:42:59] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:43:00] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:43:00] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:43:00] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:43:00] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:43:00] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:44:34] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:44:35] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:44:35] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:44:35] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:44:35] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:44:35] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:35] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:35] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:44:35] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:44:36] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:44:36] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:44:36] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:44:36] hub.usbfd | HUB | Hub port 5 attachment was not possible
E: [20:44:36] hub.usbfd | HUB | Resetting port 5 of hub "" failed. Device adding aborted
I: [20:44:36] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:44:39] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:39] hub.usbfd | HUB | No device on port 6 of hub "" after reset
W: [20:44:39] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:40] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:40] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:40] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:40] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:41] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:41] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:44:41] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:44:41] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:44:41] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:41] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:44:41] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:41] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [20:44:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:44:41] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:44:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:44:41] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:44:53] hub.usbfd | HUB | Detaching Function removed from hub port 6
I: [20:44:53] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:53] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
I: [20:44:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:53] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:44:53] hub.usbfd | HUB | Retrying attachment on port 6 of hub "" (previous attempt failed with error -19)
W: [20:44:53] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:54] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:54] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:54] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:54] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:44:54] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:44:54] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:44:54] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:44:54] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:44:54] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:44:54] hub.usbfd | Hub port | Device at port 6 of hub "" is full-speed.
I: [20:44:54] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:44:55] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [20:44:55] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:44:55] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:44:55] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:44:55] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:57:37] hub.usbfd | HUB | Detaching Function removed from hub port 6
I: [20:57:37] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [20:57:37] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:37] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:57:37] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:37] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:57:38] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:38] hub.usbfd | HUB | Resetting hub port 6 and trying again
I: [20:57:38] hub.usbfd | HUB | Port 6 of hub "" reset timed out
W: [20:57:38] hub.usbfd | HUB | Hub port 6 attachment was not possible
E: [20:57:38] hub.usbfd | HUB | Resetting port 6 of hub "" failed. Device adding aborted
I: [20:57:38] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:57:41] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:57:41] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:41] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:41] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:41] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:57:41] USB FD fkt start | FD launcher | Unable to set Fkt cfg
I: [20:57:49] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:57:50] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:57:50] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:50] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:50] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:50] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:57:50] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:50] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:50] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:51] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:51] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:51] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:51] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:51] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:51] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:57:51] hub.usbfd | HUB | Hub port 5 attachment was not possible
E: [20:57:51] hub.usbfd | HUB | Failed to add device attached to hub port 5 due to error -19
I: [20:57:51] hub.usbfd | HUB | Hub driver was unable to
add the attached device.
I: [20:57:52] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [20:57:52] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
I: [20:57:52] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:52] USB stack | New Fkt | HCD failed to add/create Fkt
W: [20:57:52] hub.usbfd | HUB | Retrying attachment on port 5 of hub "" (previous attempt failed with error -19)
W: [20:57:52] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:53] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:53] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:53] hub.usbfd | HUB | Port 5 of hub "" reset timed out
W: [20:57:53] hub.usbfd | HUB | Resetting hub port 5 and trying again
I: [20:57:53] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:53] USB stack | New Fkt | Fkt 0x6013b990 at level 2
I: [20:57:53] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:57:53] hub.usbfd | HUB | Detaching Function removed from hub port 5
I: [20:57:53] hub.usbfd | HUB | Device found on port 5 of hub "".
E: [20:57:53] USB Fkt Init | Init Fkt | Error -11 reading DevDsc
E: [20:57:53] USB Fkt Init | Init Fkt | Init failed.
E: [20:57:53] USB Fkt Init | SysFkt_Detach | Not called from USB Task - please notify graff@amigausb.dk
I: [20:57:53] hub.usbfd | Hub port | Device at port 5 of hub "" is full-speed.
I: [20:57:53] USB stack | New Fkt | Fkt 0x6013bb70 at level 2
I: [20:57:53] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 initialized
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:56] USB Fkt Init | Init Fkt Setup | Fkt attachment failed
I: [20:58:54] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [20:58:55] hub.usbfd | Hub port | Device at port 1 of hub "" is high-speed.
I: [20:58:55] USB stack | New Fkt | Fkt 0x6fda1510 at level 2
I: [20:58:55] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [20:58:55] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 is {Vendor: 0x0781, Product: 0x5595, Class: 00.00}
I: [20:58:55] USB Fkt Init | Init Fkt | Fkt 0x6fda1510 initialized
I: [20:58:55] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
W: [20:58:55] MassStorage Device Task | Massstorage | Created usbdisk.device/0
I: [20:58:59] hub.usbfd | HUB | Detaching Function removed from hub port 1
I: [20:58:59] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [20:58:59] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:58:59] hub.usbfd | HUB | Resetting hub port 1 and trying again
I: [20:59:00] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:59:00] hub.usbfd | HUB | Resetting hub port 1 and trying again
I: [20:59:00] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:59:00] hub.usbfd | HUB | Resetting hub port 1 and trying again
I: [20:59:01] hub.usbfd | HUB | Port 1 of hub "" reset timed out
W: [20:59:01] hub.usbfd | HUB | Hub port 1 attachment was not possible
E: [20:59:01] hub.usbfd | HUB | Resetting port 1 of hub "" failed. Device adding aborted
I: [20:59:01] hub.usbfd | HUB | Unable to reset hub port.
Device adding aborted.
I: [20:59:06] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [20:59:06] hub.usbfd | Hub port | Device at port 1 of hub "" is high-speed.
I: [20:59:06] USB stack | New Fkt | Fkt 0x5f900320 at level 2
I: [20:59:06] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [20:59:06] USB Fkt Init | Init Fkt | Fkt 0x5f900320 is {Vendor: 0x0781, Product: 0x5595, Class: 00.00}
I: [20:59:06] USB Fkt Init | Init Fkt | Fkt 0x5f900320 initialized
I hope someone knows….why AmigaOS randmonly recognizes it and randomly don't… The difference seems to be here:
NOT recognized:
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:41] USB Fkt Init | Init Fkt | Device Status read stalled. Using benign default values
I: [20:57:41] USB Fkt Init | Init Fkt | Fkt 0x6013b990 initialized
E: [20:57:41] USB FD fkt start | FD launcher | Unable to set Fkt cfg
Recognized:
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 is {Vendor: 0x0F39, Product: 0x1083, Class: 00.00}
I: [20:57:53] USB Fkt Init | Init Fkt | Fkt 0x6013bb70 initialized
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
I: [20:57:53] hid.usbfd | HID driver | USB Interface bound
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:53] HID Keyboard | HID Keyboard | Undefined raw key: usage=0x00070000
E: [20:57:56] USB Fkt Init | Init Fkt Setup | Fkt attachment failed
Thank you for your help!!