SAM440EP Restart/Reboot problem
Posted: Thu Jun 13, 2013 6:51 pm
Hi all!
Please help!
When I restart AMIGAOS4.1u6 was, after the title screen I get the following message:
Please insert
ENV:
in any drive
Process: 17 "GrimReaper"
Then:
Guru Meditation: 80000003
Task 0x5FD0A790 ("")
generated an error of type DSI (Data Storage Interrupt)
on adress 0x0166F45C
Redzone was not damaged
Stackpointer is inside bounds
Only the on-off switch helps.
Only reboot/restart ...
The basic start is normal.
It was nothing changes in the STARTUP and USER STARTUP scripts.
The file system is the latest PPC SFS.
U2 update work with restart and OS4.1 CD-ROM as well.
After U3 is a cast update Reboot so you can stop.
Interestingly, not all the time!
Sometimes it restarts okay.
PSU: mini ATX desktop - I replaced the power supply is another.
One SATA HDD and a SATA CD drive in your computer.
R9200 is a PCI slot.
USB devices wireless keyboard and mouse.
Interestingly, the error only works when the mouse up and down directions ...
This to me is an old problem.
Occurs even after a clean OS install, but only after U3.
Therefore, I think that this problem is not hardware investment.
More like a software problem.
My Config:
SAM440EP Mini-ITX 667 with latest FW
512 MByte RAM
AOS4.1.6
Thanx!
Please help!
When I restart AMIGAOS4.1u6 was, after the title screen I get the following message:
Please insert
ENV:
in any drive
Process: 17 "GrimReaper"
Then:
Guru Meditation: 80000003
Task 0x5FD0A790 ("")
generated an error of type DSI (Data Storage Interrupt)
on adress 0x0166F45C
Redzone was not damaged
Stackpointer is inside bounds
Only the on-off switch helps.
Only reboot/restart ...
The basic start is normal.
It was nothing changes in the STARTUP and USER STARTUP scripts.
The file system is the latest PPC SFS.
U2 update work with restart and OS4.1 CD-ROM as well.
After U3 is a cast update Reboot so you can stop.
Interestingly, not all the time!
Sometimes it restarts okay.
PSU: mini ATX desktop - I replaced the power supply is another.
One SATA HDD and a SATA CD drive in your computer.
R9200 is a PCI slot.
USB devices wireless keyboard and mouse.
Interestingly, the error only works when the mouse up and down directions ...
This to me is an old problem.
Occurs even after a clean OS install, but only after U3.
Therefore, I think that this problem is not hardware investment.
More like a software problem.
My Config:
SAM440EP Mini-ITX 667 with latest FW
512 MByte RAM
AOS4.1.6
Thanx!