hello there,
I did a fresh install of 4.1FE including all updates and most contributions from the CD-ROM.
Now, I remember WHDLoad asking for a Keyfile and I skipped it - because most recent version is free and needs no keyfiles anymore.
How can I update or re-install the latest WHDLoad to work with the Run-In-U-AE setup ?
AFAIK it will not work, when just DL WHDLoad.lha, extract it and then run installer.
Can somebody please guide me thru this process? I do not want to destroy my setup - it just took me far tooooo long to have it up and running...
Cheers!
How to update WHDLoad to work with Run-In-U-AE?
Re: How to update WHDLoad to work with Run-In-U-AE?
You need to install it inside the emulation. You can make use of the RunInUAE RAM share feature.
- Simply copy or extract WHDLoad to your OS4 RAM Disk.
- Now load up RunInUAE and boot WB.
- On the UAE WB locate WHDLoad from the RAM Disk 2 (or whatever the name is).
- Run the WHDLoad installer.
Re: How to update WHDLoad to work with Run-In-U-AE?
hello Hypex,
thank you for your advice.
I tried to follow the steps you suggested - but got no luck.
First, I extracted WHDLoad to my OS4.1 RAM Disk, then I started RunInUAE and booted up WB.
On this "UAE-WB" I just get one Ram Disk (the empty one from the WB 3.1) and can not see a way to access
my 4.1 Ram disk from there.
Besides the Ram disk, there is only a Workbench and a SavedGames drawer.
Another thing is, when I try to set RunInUae to execute things "windowed" or in another Res (like 640x400 or something)
I get a Guru right after choosing so. I like to run emulated stuff in a window, like 800x600 or something similar.
But UAE won´t let me do so *sigh*
I´ve found out that CTRL+ALT+S shows a screen where I can change settings - but if I choose something like
"PAL high res" system freezes...
man this sucks! No way to change anything, regarding resolution? strange !
anyways, resolution-guru´s aside - where can I get access to my other Ram disk from within the booted WB3.1 emulation?
please explain!
Cheers
thank you for your advice.
I tried to follow the steps you suggested - but got no luck.
First, I extracted WHDLoad to my OS4.1 RAM Disk, then I started RunInUAE and booted up WB.
On this "UAE-WB" I just get one Ram Disk (the empty one from the WB 3.1) and can not see a way to access
my 4.1 Ram disk from there.
Besides the Ram disk, there is only a Workbench and a SavedGames drawer.
Another thing is, when I try to set RunInUae to execute things "windowed" or in another Res (like 640x400 or something)
I get a Guru right after choosing so. I like to run emulated stuff in a window, like 800x600 or something similar.
But UAE won´t let me do so *sigh*
I´ve found out that CTRL+ALT+S shows a screen where I can change settings - but if I choose something like
"PAL high res" system freezes...
man this sucks! No way to change anything, regarding resolution? strange !
anyways, resolution-guru´s aside - where can I get access to my other Ram disk from within the booted WB3.1 emulation?
please explain!
Cheers
Re: How to update WHDLoad to work with Run-In-U-AE?
Hi. I need to check my config but for me it worked without changing anything as far as I can recall. I can't find much info online about it. My setup is fairly generic. I really haven't customised it at all. I use it to test 68K software on a plain WB and some games now and then.
Sometimes I open a 68K binary and let RunInUAE launch it. But mostly I use Boot WB from the RunInUAE menu. I know you can do it for games but not sure about having different WB configs. Suppose it's all the same to RunInUAE. Check your main config .uaerc_runinUAE file and the following should be there for the shared RAM Disk:
As to screenmodes I don't think I tested that much. Shouldn't matter in windows mode. Looks like a bug in the UAE that RunInUAE is using. It's possible it couldn't open the screen it wanted. But I would have expected it would check.
Sometimes I open a 68K binary and let RunInUAE launch it. But mostly I use Boot WB from the RunInUAE menu. I know you can do it for games but not sure about having different WB configs. Suppose it's all the same to RunInUAE. Check your main config .uaerc_runinUAE file and the following should be there for the shared RAM Disk:
Code: Select all
filesystem2=rw,RAM Disk2_:RAM Disk2:RAM Disk:,-1
Re: How to update WHDLoad to work with Run-In-U-AE?
@Elowan
These are my gfx settings in .uaerc, you can play with them and see if they fit your needs (# are comments)
## Display settings
gfx_width_windowed=640
gfx_height_windowed=512
#gfx_width_fullscreen=640
#gfx_height_fullscreen=512
gfx_lores=false
# Linemode
# (none, double, scanlines)
# Biing!!! needs "double"
gfx_linemode=double
gfx_correct_aspect=yes
# Center
# (none, simple, smart)
gfx_center_horizontal=smart
gfx_center_vertical=smart
gfx_fullscreen_amiga=true
# Frame skip
# (1=show all frames, 2=show every 2nd frame, 3=show every 3rd frame, etc)
gfx_framerate=1
# blitter_cycle_exact has to be set to "no" for JIT to work correctly
blitter_cycle_exact=no
These are my gfx settings in .uaerc, you can play with them and see if they fit your needs (# are comments)
## Display settings
gfx_width_windowed=640
gfx_height_windowed=512
#gfx_width_fullscreen=640
#gfx_height_fullscreen=512
gfx_lores=false
# Linemode
# (none, double, scanlines)
# Biing!!! needs "double"
gfx_linemode=double
gfx_correct_aspect=yes
# Center
# (none, simple, smart)
gfx_center_horizontal=smart
gfx_center_vertical=smart
gfx_fullscreen_amiga=true
# Frame skip
# (1=show all frames, 2=show every 2nd frame, 3=show every 3rd frame, etc)
gfx_framerate=1
# blitter_cycle_exact has to be set to "no" for JIT to work correctly
blitter_cycle_exact=no
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Re: How to update WHDLoad to work with Run-In-U-AE?
Thanks, this worked - I got a Ram Disk2 now, which happen to be the one from OS4.1. But when I doubleclick the WHDLoad intaller I get:Hypex wrote: ↑Sat Sep 24, 2022 7:12 am Hi. I need to check my config but for me it worked without changing anything as far as I can recall. I can't find much info online about it. My setup is fairly generic. I really haven't customised it at all. I use it to test 68K software on a plain WB and some games now and then.
Sometimes I open a 68K binary and let RunInUAE launch it. But mostly I use Boot WB from the RunInUAE menu. I know you can do it for games but not sure about having different WB configs. Suppose it's all the same to RunInUAE. Check your main config .uaerc_runinUAE file and the following should be there for the shared RAM Disk:As to screenmodes I don't think I tested that much. Shouldn't matter in windows mode. Looks like a bug in the UAE that RunInUAE is using. It's possible it couldn't open the screen it wanted. But I would have expected it would check.Code: Select all
filesystem2=rw,RAM Disk2_:RAM Disk2:RAM Disk:,-1
"Unable to open your tool installer"... hmmm - I am kind of stuck again
Cheers!
Re: How to update WHDLoad to work with Run-In-U-AE?
thank you, works fine! only thing is, UAE still starts in fullscreen mode, instead of windowed. I need to go "CTRL+ALT+S" then "Cancel" the dialog requester to get a uae run windowed in the resolution I setup in .uaerc file (720x568 in this case)
Another thing is, when I change the screensize in emulated WB to say "PAL High RES Laced" and go "Save" - settings are gone next time I startup the emulataed WB again.
Is this "emulator install" not supposed to be changed?
Cheers!
Re: How to update WHDLoad to work with Run-In-U-AE?
Make sure "Installer" can be found in your path.Elowan wrote: ↑Mon Sep 26, 2022 8:20 pmThanks, this worked - I got a Ram Disk2 now, which happen to be the one from OS4.1. But when I doubleclick the WHDLoad intaller I get:Hypex wrote: ↑Sat Sep 24, 2022 7:12 am Hi. I need to check my config but for me it worked without changing anything as far as I can recall. I can't find much info online about it. My setup is fairly generic. I really haven't customised it at all. I use it to test 68K software on a plain WB and some games now and then.
Sometimes I open a 68K binary and let RunInUAE launch it. But mostly I use Boot WB from the RunInUAE menu. I know you can do it for games but not sure about having different WB configs. Suppose it's all the same to RunInUAE. Check your main config .uaerc_runinUAE file and the following should be there for the shared RAM Disk:As to screenmodes I don't think I tested that much. Shouldn't matter in windows mode. Looks like a bug in the UAE that RunInUAE is using. It's possible it couldn't open the screen it wanted. But I would have expected it would check.Code: Select all
filesystem2=rw,RAM Disk2_:RAM Disk2:RAM Disk:,-1
"Unable to open your tool installer"... hmmm - I am kind of stuck again
Cheers!
Otherwise you can change the program that will be executed from "Information/Icon" to e.g. "Sys:utilities/installer"
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Re: How to update WHDLoad to work with Run-In-U-AE?
hmmm, sorry don´t know...
I installed WHDLoad a few times on other systems, the installer always did his job.
Never had to change anything.
What I get from your reply, is I have to go into "information" of the installer and set another path?
If so - what path should I point to?
Sorry, I am kind of a new to this stuff - maybe I am asking a obvious question?
Cheers!
I installed WHDLoad a few times on other systems, the installer always did his job.
Never had to change anything.
What I get from your reply, is I have to go into "information" of the installer and set another path?
If so - what path should I point to?
Sorry, I am kind of a new to this stuff - maybe I am asking a obvious question?
Cheers!
Re: How to update WHDLoad to work with Run-In-U-AE?
Try to do a
"which installer"
In a shell where installer resides and then use that on information.
No problem, every one of us was new to this stuff at one time
"which installer"
In a shell where installer resides and then use that on information.
No problem, every one of us was new to this stuff at one time
People are dying.
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg
Entire ecosystems are collapsing.
We are in the beginning of a mass extinction.
And all you can talk about is money and fairytales of eternal economic growth.
How dare you!
– Greta Thunberg