Hyperion Entertainment Message Boards

Posted: **Mon Dec 28, 2020 4:47 pm**

AI actually crashes with these devices online:
(images)

Something like this

CPU
Model: IBM PowerPC 750 FX V2.2
CPU speed: 800 MHz
Stack trace:
module CURRDIR:Generic_usb.driver at 0x7F8482E4 (section 0 @ 0x42C0)
module CURRDIR:Generic_usb.driver at 0x7F8468BC (section 0 @ 0x2898)
module CURRDIR:Generic_usb.driver at 0x7F847D80 (section 0 @ 0x3D5C)
native kernel module dos.library.kmod+0x0002a1a8
native kernel module kernel+0x00040058
native kernel module kernel+0x000400a0

Kickstart 53.89, Workbench 53.17
Kickstart USB versions are 53.22.
AmigaInput library is 53.4, AI prefs program is 53.13.
Is this common when you don't have the drivers ready?

Posted: **Fri Jan 01, 2021 3:17 pm**

It shouldn't crash, of course. In the T:usb.log, do you have anything related to the device (Is it a mouse?)?

The USB log should contain these lines if there is no driver:

No interface driver of 0x???????? {Class ??.??} has been found
[0x????????] Could not bind any suitable driver for ???

? = hexadecimal number

Have you installed AmigaOS 4.1 FE Update 2? I can see that you don't have the latest Kickstart (version 54.28).

My Kickstart contains these USB modules:

bootkeyboard.usbfd 52.3
bootmouse.usbfd 53.3
usbsys.device 53.22
usbresource.library 53.22
uhci.usbhcd 53.15
ohci.usbhcd 53.22
massstorage.usbfd 53.84
hub.usbfd 53.11
ehci.usbhcd 53.26

Posted: **Sat Jan 02, 2021 12:44 am**

At least the Fanatec is a little bit critical
https://www.fanaleds.com/forum/viewtopic.php?t=512

Hyperion Entertainment Message Boards

AmigaInput fails to start with unknown USB device?

AmigaInput fails to start with unknown USB device?

Re: AmigaInput fails to start with unknown USB device?

Re: AmigaInput fails to start with unknown USB device?