Hyperion Entertainment Message Boards

When linux kernels became distributed in zImage format ( from 4.19 ) I noticed, that my cfcard has I/O errors with zipped images. It means, reading from cfcard is too slow. Then I try faster card. zImages boot fine from it, but fast cfcard is not visible from linux after boot. With xeno advice I mad...

5.1-rc5 works fine.

The issue with new fast cfcard and new kernels are still here.
I made some summarization and place it to new topic.

We need some error messages for reporting the issue to the kernel developers. I don't have any problems with my SanDisk 256MB CF card. I intensively tested the RC5 of kernel 5.1 with my CF card today. It works without any problems with compressed and uncompressed Linux kernels. -- Christian I know,...

xeno74 wrote:What about Fienix/4.20?
-- Christian

Fienix 4.20 I don't tested yet.
But Debian8 with 5.1 the same error.

I'll try find in dmesgs which component is responsible for not-see the cfcard.
But it can be workarounded - find cf fast enough to no-errors and small/slow enough to be seen in 5.1.

and here is my dmesg with new fast CF ( no errors, boot normally with zipped images) 20190414_112358.jpg Works with Debian8/4.2: [ 2.585914] ata7: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0xf0000800 ctl 0xf000080e [ 2.779804] ata7.00: CFA: SDCFXS-032G, HDX16.01, max PIO4 [ 2.779808] ata7.00:...

My onboard CF card (dmesg): ata7.00: CFA: SanDisk SDCFB-256, HDX 2.33, max PIO4 sd 6:0:0:0: [sdc] 501760 512-byte logical blocks: (257 MB/245 MiB) sd 6:0:0:0: [sdc] Write Protect is off Hi Christian here is my dmesg with original slower CF ( write errors when boot from zipped images ) 20190414_1123...

xeno74 wrote:FYI: PowerPC fixes 5.1-5
We don’t need the gettimeofday patch anymore.

Thanks!

Please try a msdos partition table. You can create it with GParted. Instructions: Open gparted Use the menu on the right side of the toolbar to select the CF card Click the Device menu, then click Create Partition Table Select new partition table type: msdos Click Apply Choose the Partition menu, t...

there is second part od dmesg (11 sec and above). First part is in the post above. Sorry it exceeds max message length. [ 11.718567] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKI...

Please post the output of dmesg if you run Fienix. Maybe there are some messages about your CF card in the dmesg output. Hi Christian, here is dmesg (first 10sec )- i don't finy anything regarding cfcard [ 0.000000] hash-mmu: Page sizes from device-tree: [ 0.000000] hash-mmu: base_shift=12: shift=1...