Hyperion Entertainment Message Boards

When I switch on X1000 it takes about 12 sec. before the initial screen appears. Diffs in my CFE; 1. CFE_MEMORYSIZE 2048 2. STARTUP set pmu -astate=A4;menu (no separate 'speed') 3. NO os4commandline Not sure about this, but 'speed' sets the variable to whatever, and 'STARTUP' should then use that v...

Unfortunately it was not the solution to connect the network cable to the motherboard. Sometimes if I start the X1000 then it has power (electricity) and hangs before the CFE boot menu appears with flashing motherboard network connector. The display remains black

Hi, I've downloaded SuperTuxKart 0.8 from http://sourceforge.net/projects/supertuxkart/files/SuperTuxKart/0.8/supertuxkart-0.8-linux-glibc2.11-ppc.tar.bz2/download . The most tracks are OK but I have sometimes a freeze of the complete desktop with following error message: radeon 0000:01:00.0 couldn'...

zappa2009 wrote:yes it does. But you need the right initrd.gz.
The Rest is the same as it with Debian wheezy / mintppc11

Ubuntu 12.04 yes (with out 3D).

mfg Stanglantor

Do we need a new kernel?

What about Free-, Net-, and OpenBSD for the X1000?

What's the PCI network card you have installed? Realtek RTL-8139/8139C/8139C+ If the network cable not plugged into the motherboard and the X1000 sometimes doesn't boot, then I don't see the A-EON X1000 splash screen. I get a black screen :( My CFE settings: http://www.xenosoft.de/cfe-settings.jpg

Unfortunately I can't remove the network connector from the motherboard. When I plug the network cable in the motherboard then the X1000 a l w a y s boot up without any problems. That's my solution at this time ;) Sometimes the X1000 doesn't boot without network cable in the motherboard. The X1000 h...

Does the kernel 3.5.7 work with Ubuntu 12.04?

Hi X1000 community, My name is Xeno and I bought a X1000, too. At the beginn I have a lot of troubles with the X1000 in connection with an ATEN KVM Switch. These problems were resolved. I have installed Debian Wheezy with kernel 3.5.7 on the X1000. Other Linux distributions doesn't work because I ha...

Hi, Sometimes the X1000 doesn't boot. It doesn't display the CFE menu and the intern network connection flashes. When I plug the network cable in the intern network socket then the X1000 always boot up without any problems. But OS4.1 needs the network connection over the pci network card. It doesn't...